Qiao Liu

Honghu Pan, Qiao Liu, Yongyong Chen et al.

Existing methods for video-based person re-identification (ReID) mainly learn the appearance feature of a given pedestrian via a feature extractor and a feature aggregator. However, the appearance models would fail when different pedestrians have similar appearances. Considering that different pedestrians have different walking postures and body proportions, we propose to learn the discriminative pose feature beyond the appearance feature for video retrieval. Specifically, we implement a two-branch architecture to separately learn the appearance feature and pose feature, and then concatenate them together for inference. To learn the pose feature, we first detect the pedestrian pose in each frame through an off-the-shelf pose detector, and construct a temporal graph using the pose sequence. We then exploit a recurrent graph convolutional network (RGCN) to learn the node embeddings of the temporal pose graph, which devises a global information propagation mechanism to simultaneously achieve the neighborhood aggregation of intra-frame nodes and message passing among inter-frame graphs. Finally, we propose a dual-attention method consisting of node-attention and time-attention to obtain the temporal graph representation from the node embeddings, where the self-attention mechanism is employed to learn the importance of each node and each frame. We verify the proposed method on three video-based ReID datasets, i.e., Mars, DukeMTMC and iLIDS-VID, whose experimental results demonstrate that the learned pose feature can effectively improve the performance of existing appearance models.

Qiao Li, Kanlun Tan, Qiao Liu et al.

Due to the lack of large-scale labeled Thermal InfraRed (TIR) training datasets, most existing TIR trackers are trained directly on RGB datasets. However, tracking methods trained on RGB datasets suffer a significant drop-off in TIR data due to the domain shift issue. To this end, in this work, we propose a Progressive Domain Adaptation framework for TIR Tracking (PDAT), which transfers useful knowledge learned from RGB tracking to TIR tracking. The framework makes full use of large-scale labeled RGB datasets without requiring time-consuming and labor-intensive labeling of large-scale TIR data. Specifically, we first propose an adversarial-based global domain adaptation module to reduce domain gap on the feature level coarsely. Second, we design a clustering-based subdomain adaptation method to further align the feature distributions of the RGB and TIR datasets finely. These two domain adaptation modules gradually eliminate the discrepancy between the two domains, and thus learn domain-invariant fine-grained features through progressive training. Additionally, we collect a largescale TIR dataset with over 1.48 million unlabeled TIR images for training the proposed domain adaptation framework. Experimental results on five TIR tracking benchmarks show that the proposed method gains a nearly 6% success rate, demonstrating its effectiveness.

Qiao Liu, Xin Li, Zhenyu He et al.

Existing deep Thermal InfraRed (TIR) trackers usually use the feature models of RGB trackers for representation. However, these feature models learned on RGB images are neither effective in representing TIR objects nor taking fine-grained TIR information into consideration. To this end, we develop a multi-task framework to learn the TIR-specific discriminative features and fine-grained correlation features for TIR tracking. Specifically, we first use an auxiliary classification network to guide the generation of TIR-specific discriminative features for distinguishing the TIR objects belonging to different classes. Second, we design a fine-grained aware module to capture more subtle information for distinguishing the TIR objects belonging to the same class. These two kinds of features complement each other and recognize TIR objects in the levels of inter-class and intra-class respectively. These two feature models are learned using a multi-task matching framework and are jointly optimized on the TIR tracking task. In addition, we develop a large-scale TIR training dataset to train the network for adapting the model to the TIR domain. Extensive experimental results on three benchmarks show that the proposed algorithm achieves a relative gain of 10% over the baseline and performs favorably against the state-of-the-art methods. Codes and the proposed TIR dataset are available at {https://github.com/QiaoLiuHit/MMNet}.

Qiao Liu, Zhenyu He, Xin Li et al.

Thermal infrared (TIR) pedestrian tracking is one of the important components among numerous applications of computer vision, which has a major advantage: it can track pedestrians in total darkness. The ability to evaluate the TIR pedestrian tracker fairly, on a benchmark dataset, is significant for the development of this field. However, there is not a benchmark dataset. In this paper, we develop a TIR pedestrian tracking dataset for the TIR pedestrian tracker evaluation. The dataset includes 60 thermal sequences with manual annotations. Each sequence has nine attribute labels for the attribute based evaluation. In addition to the dataset, we carry out the large-scale evaluation experiments on our benchmark dataset using nine publicly available trackers. The experimental results help us understand the strengths and weaknesses of these trackers.In addition, in order to gain more insight into the TIR pedestrian tracker, we divide its functions into three components: feature extractor, motion model, and observation model. Then, we conduct three comparison experiments on our benchmark dataset to validate how each component affects the tracker's performance. The findings of these experiments provide some guidelines for future research. The dataset and evaluation toolkit can be downloaded at {https://github.com/QiaoLiuHit/PTB-TIR_Evaluation_toolkit}.

Xin Li, Qiao Liu, Wenjie Pei et al.

Along with the rapid progress of visual tracking, existing benchmarks become less informative due to redundancy of samples and weak discrimination between current trackers, making evaluations on all datasets extremely time-consuming. Thus, a small and informative benchmark, which covers all typical challenging scenarios to facilitate assessing the tracker performance, is of great interest. In this work, we develop a principled way to construct a small and informative tracking benchmark (ITB) with 7% out of 1.2 M frames of existing and newly collected datasets, which enables efficient evaluation while ensuring effectiveness. Specifically, we first design a quality assessment mechanism to select the most informative sequences from existing benchmarks taking into account 1) challenging level, 2) discriminative strength, 3) and density of appearance variations. Furthermore, we collect additional sequences to ensure the diversity and balance of tracking scenarios, leading to a total of 20 sequences for each scenario. By analyzing the results of 15 state-of-the-art trackers re-trained on the same data, we determine the effective methods for robust tracking under each scenario and demonstrate new challenges for future research direction in this field.

Di Yuan, Xiaojun Chang, Yi Yang et al.

Convolutional neural networks (CNNs) have been successfully applied to the single target tracking task in recent years. Generally, training a deep CNN model requires numerous labeled training samples, and the number and quality of these samples directly affect the representational capability of the trained model. However, this approach is restrictive in practice, because manually labeling such a large number of training samples is time-consuming and prohibitively expensive. In this paper, we propose an active learning method for deep visual tracking, which selects and annotates the unlabeled samples to train the deep CNNs model. Under the guidance of active learning, the tracker based on the trained deep CNNs model can achieve competitive tracking performance while reducing the labeling cost. More specifically, to ensure the diversity of selected samples, we propose an active learning method based on multi-frame collaboration to select those training samples that should be and need to be annotated. Meanwhile, considering the representativeness of these selected samples, we adopt a nearest neighbor discrimination method based on the average nearest neighbor distance to screen isolated samples and low-quality samples. Therefore, the training samples subset selected based on our method requires only a given budget to maintain the diversity and representativeness of the entire sample set. Furthermore, we adopt a Tversky loss to improve the bounding box estimation of our tracker, which can ensure that the tracker achieves more accurate target states. Extensive experimental results confirm that our active learning-based tracker (ALT) achieves competitive tracking accuracy and speed compared with state-of-the-art trackers on the seven most challenging evaluation benchmarks.

Di Yuan, Xiu Shu, Nana Fan et al.

Most existing trackers are based on using a classifier and multi-scale estimation to estimate the target state. Consequently, and as expected, trackers have become more stable while tracking accuracy has stagnated. While trackers adopt a maximum overlap method based on an intersection-over-union (IoU) loss to mitigate this problem, there are defects in the IoU loss itself, that make it impossible to continue to optimize the objective function when a given bounding box is completely contained within/without another bounding box; this makes it very challenging to accurately estimate the target state. Accordingly, in this paper, we address the above-mentioned problem by proposing a novel tracking method based on a distance-IoU (DIoU) loss, such that the proposed tracker consists of target estimation and target classification. The target estimation part is trained to predict the DIoU score between the target ground-truth bounding-box and the estimated bounding-box. The DIoU loss can maintain the advantage provided by the IoU loss while minimizing the distance between the center points of two bounding boxes, thereby making the target estimation more accurate. Moreover, we introduce a classification part that is trained online and optimized with a Conjugate-Gradient-based strategy to guarantee real-time tracking speed. Comprehensive experimental results demonstrate that the proposed method achieves competitive tracking accuracy when compared to state-of-the-art trackers while with a real-time tracking speed.

Qiao Liu, Xin Li, Zhenyu He et al.

Existing deep Thermal InfraRed (TIR) trackers only use semantic features to describe the TIR object, which lack the sufficient discriminative capacity for handling distractors. This becomes worse when the feature extraction network is only trained on RGB images.To address this issue, we propose a multi-level similarity model under a Siamese framework for robust TIR object tracking. Specifically, we compute different pattern similarities on two convolutional layers using the proposed multi-level similarity network. One of them focuses on the global semantic similarity and the other computes the local structural similarity of the TIR object. These two similarities complement each other and hence enhance the discriminative capacity of the network for handling distractors. In addition, we design a simple while effective relative entropy based ensemble subnetwork to integrate the semantic and structural similarities. This subnetwork can adaptive learn the weights of the semantic and structural similarities at the training stage. To further enhance the discriminative capacity of the tracker, we construct the first large scale TIR video sequence dataset for training the proposed model. The proposed TIR dataset not only benefits the training for TIR tracking but also can be applied to numerous TIR vision tasks. Extensive experimental results on the VOT-TIR2015 and VOT-TIR2017 benchmarks demonstrate that the proposed algorithm performs favorably against the state-of-the-art methods.

Xin Li, Qiao Liu, Nana Fan et al.

Most thermal infrared (TIR) tracking methods are discriminative, treating the tracking problem as a classification task. However, the objective of the classifier (label prediction) is not coupled to the objective of the tracker (location estimation). The classification task focuses on the between-class difference of the arbitrary objects, while the tracking task mainly deals with the within-class difference of the same objects. In this paper, we cast the TIR tracking problem as a similarity verification task, which is coupled well to the objective of the tracking task. We propose a TIR tracker via a Hierarchical Spatial-aware Siamese Convolutional Neural Network (CNN), named HSSNet. To obtain both spatial and semantic features of the TIR object, we design a Siamese CNN that coalesces the multiple hierarchical convolutional layers. Then, we propose a spatial-aware network to enhance the discriminative ability of the coalesced hierarchical feature. Subsequently, we train this network end to end on a large visible video detection dataset to learn the similarity between paired objects before we transfer the network into the TIR domain. Next, this pre-trained Siamese network is used to evaluate the similarity between the target template and target candidates. Finally, we locate the candidate that is most similar to the tracked target. Extensive experimental results on the benchmarks VOT-TIR 2015 and VOT-TIR 2016 show that our proposed method achieves favourable performance compared to the state-of-the-art methods.