Keivan Faghih Niresi

Keivan Faghih Niresi, Mengjie Zhao, Hugo Bissig et al.

The use of Internet of Things (IoT) sensors for air pollution monitoring has significantly increased, resulting in the deployment of low-cost sensors. Despite this advancement, accurately calibrating these sensors in uncontrolled environmental conditions remains a challenge. To address this, we propose a novel approach that leverages graph neural networks, specifically the graph attention network module, to enhance the calibration process by fusing data from sensor arrays. Through our experiments, we demonstrate the effectiveness of our approach in significantly improving the calibration accuracy of sensors in IoT air pollution monitoring platforms.

Keivan Faghih Niresi, Ismail Nejjar, Olga Fink

The growing deployment of low-cost, distributed sensor networks in environmental and biomedical domains has enabled continuous, large-scale health monitoring. However, these systems often face challenges related to degraded data quality caused by sensor drift, noise, and insufficient calibration -- factors that limit their reliability in real-world applications. Traditional machine learning methods for sensor fusion and calibration rely on extensive feature engineering and struggle to capture spatial-temporal dependencies or adapt to distribution shifts across varying deployment conditions. To address these challenges, we propose a novel unsupervised domain adaptation (UDA) method tailored for regression tasks. Our proposed method integrates effectively with Spatial-Temporal Graph Neural Networks and leverages the alignment of perturbed inverse Gram matrices between source and target domains, drawing inspiration from Tikhonov regularization. This approach enables scalable and efficient domain adaptation without requiring labeled data in the target domain. We validate our novel method on real-world datasets from two distinct applications: air quality monitoring and EEG signal reconstruction. Our method achieves state-of-the-art performance which paves the way for more robust and transferable sensor fusion models in both environmental and physiological contexts. Our code is available at https://github.com/EPFL-IMOS/TikUDA.

Keivan Faghih Niresi, Christian Møller Jensen, Carsten Skovmose Kallesøe et al.

Intelligent operation of thermal energy networks aims to improve energy efficiency, reliability, and operational flexibility through data-driven control, predictive optimization, and early fault detection. Achieving these goals relies on sufficient observability, requiring continuous and well-distributed monitoring of thermal and hydraulic states. However, district heating systems are typically sparsely instrumented and frequently affected by sensor faults, limiting monitoring. Virtual sensing offers a cost-effective means to enhance observability, yet its development and validation remain limited in practice. Existing data-driven methods generally assume dense synchronized data, while analytical models rely on simplified hydraulic and thermal assumptions that may not adequately capture the behavior of heterogeneous network topologies. Consequently, modeling the coupled nonlinear dependencies between pressure, flow, and temperature under realistic operating conditions remains challenging. In addition, the lack of publicly available benchmark datasets hinders systematic comparison of virtual sensing approaches. To address these challenges, we propose a heterogeneous spatial-temporal graph neural network (HSTGNN) for constructing virtual smart heat meters. The model incorporates the functional relationships inherent in district heating networks and employs dedicated branches to learn graph structures and temporal dynamics for flow, temperature, and pressure measurements, thereby enabling the joint modeling of cross-variable and spatial correlations. To support further research, we introduce a controlled laboratory dataset collected at the Aalborg Smart Water Infrastructure Laboratory, providing synchronized high-resolution measurements representative of real operating conditions. Extensive experiments demonstrate that the proposed approach significantly outperforms existing baselines.

Keivan Faghih Niresi, Zepeng Zhang, Olga Fink

Time series data are often affected by various forms of corruption, such as missing values, noise, and outliers, which pose significant challenges for tasks such as forecasting and anomaly detection. To address these issues, inverse problems focus on reconstructing the original signal from corrupted data by leveraging prior knowledge about its underlying structure. While deep learning methods have demonstrated potential in this domain, they often require extensive pretraining and struggle to generalize under distribution shifts. In this work, we propose RINS-T (Robust Implicit Neural Solvers for Time Series Linear Inverse Problems), a novel deep prior framework that achieves high recovery performance without requiring pretraining data. RINS-T leverages neural networks as implicit priors and integrates robust optimization techniques, making it resilient to outliers while relaxing the reliance on Gaussian noise assumptions. To further improve optimization stability and robustness, we introduce three key innovations: guided input initialization, input perturbation, and convex output combination techniques. Each of these contributions strengthens the framework's optimization stability and robustness. These advancements make RINS-T a flexible and effective solution for addressing complex real-world time series challenges. Our code is available at https://github.com/EPFL-IMOS/RINS-T.

Keivan Faghih Niresi, Jun Qing, Mengjie Zhao et al.

Structural Health Monitoring (SHM) plays a crucial role in maintaining the safety and resilience of infrastructure. As sensor networks grow in scale and complexity, identifying the most informative sensors becomes essential to reduce deployment costs without compromising monitoring quality. While Graph Signal Processing (GSP) has shown promise by leveraging spatial correlations among sensor nodes, conventional approaches often overlook the temporal dynamics of structural behavior. To overcome this limitation, we propose Time-Vertex Machine Learning (TVML), a novel framework that integrates GSP, time-domain analysis, and machine learning to enable interpretable and efficient sensor placement by identifying representative nodes that minimize redundancy while preserving critical information. We evaluate the proposed approach on two bridge datasets for damage detection and time-varying graph signal reconstruction tasks. The results demonstrate the effectiveness of our approach in enhancing SHM systems by providing a robust, adaptive, and efficient solution for sensor placement.

Keivan Faghih Niresi, Hugo Bissig, Henri Baumann et al.

The Industrial Internet of Things (IIoT) is reshaping manufacturing, industrial processes, and infrastructure management. By fostering new levels of automation, efficiency, and predictive maintenance, IIoT is transforming traditional industries into intelligent, seamlessly interconnected ecosystems. However, achieving highly reliable IIoT can be hindered by factors such as the cost of installing large numbers of sensors, limitations in retrofitting existing systems with sensors, or harsh environmental conditions that may make sensor installation impractical. Soft (virtual) sensing leverages mathematical models to estimate variables from physical sensor data, offering a solution to these challenges. Data-driven and physics-based modeling are the two main methodologies widely used for soft sensing. The choice between these strategies depends on the complexity of the underlying system, with the data-driven approach often being preferred when the physics-based inference models are intricate and present challenges for state estimation. However, conventional deep learning models are typically hindered by their inability to explicitly represent the complex interactions among various sensors. To address this limitation, we adopt Graph Neural Networks (GNNs), renowned for their ability to effectively capture the complex relationships between sensor measurements. In this research, we propose physics-enhanced GNNs, which integrate principles of physics into graph-based methodologies. This is achieved by augmenting additional nodes in the input graph derived from the underlying characteristics of the physical processes. Our evaluation of the proposed methodology on the case study of district heating networks reveals significant improvements over purely data-driven GNNs, even in the presence of noise and parameter inaccuracies.

Olga Fink, Ismail Nejjar, Vinay Sharma et al.

Prognostics and Health Management ensures the reliability, safety, and efficiency of complex engineered systems by enabling fault detection, anticipating equipment failures, and optimizing maintenance activities throughout an asset lifecycle. However, real-world PHM presents persistent challenges: sensor data is often noisy or incomplete, available labels are limited, and degradation behaviors and system interdependencies can be highly complex and nonlinear. Physics-informed machine learning has emerged as a promising approach to address these limitations by embedding physical knowledge into data-driven models. This review examines how incorporating learning and observational biases through physics-informed modeling and data strategies can guide models toward physically consistent and reliable predictions. Learning biases embed physical constraints into model training through physics-informed loss functions and governing equations, or by incorporating properties like monotonicity. Observational biases influence data selection and synthesis to ensure models capture realistic system behavior through virtual sensing for estimating unmeasured states, physics-based simulation for data augmentation, and multi-sensor fusion strategies. The review then examines how these approaches enable the transition from passive prediction to active decision-making through reinforcement learning, which allows agents to learn maintenance policies that respect physical constraints while optimizing operational objectives. This closes the loop between model-based predictions, simulation, and actual system operation, empowering adaptive decision-making. Finally, the review addresses the critical challenge of scaling PHM solutions from individual assets to fleet-wide deployment. Fast adaptation methods including meta-learning and few-shot learning are reviewed alongside domain generalization techniques ...