Meng Zhang

Yang Li, Ruinong Wang, Yuanzheng Li et al.

In a modern power system with an increasing proportion of renewable energy, wind power prediction is crucial to the arrangement of power grid dispatching plans due to the volatility of wind power. However, traditional centralized forecasting methods raise concerns regarding data privacy-preserving and data islands problem. To handle the data privacy and openness, we propose a forecasting scheme that combines federated learning and deep reinforcement learning (DRL) for ultra-short-term wind power forecasting, called federated deep reinforcement learning (FedDRL). Firstly, this paper uses the deep deterministic policy gradient (DDPG) algorithm as the basic forecasting model to improve prediction accuracy. Secondly, we integrate the DDPG forecasting model into the framework of federated learning. The designed FedDRL can obtain an accurate prediction model in a decentralized way by sharing model parameters instead of sharing private data which can avoid sensitive privacy issues. The simulation results show that the proposed FedDRL outperforms the traditional prediction methods in terms of forecasting accuracy. More importantly, while ensuring the forecasting performance, FedDRL can effectively protect the data privacy and relieve the communication pressure compared with the traditional centralized forecasting method. In addition, a simulation with different federated learning parameters is conducted to confirm the robustness of the proposed scheme.

Meng Zhang, Liangyou Li, Qun Liu

Triangular machine translation is a special case of low-resource machine translation where the language pair of interest has limited parallel data, but both languages have abundant parallel data with a pivot language. Naturally, the key to triangular machine translation is the successful exploitation of such auxiliary data. In this work, we propose a transfer-learning-based approach that utilizes all types of auxiliary data. As we train auxiliary source-pivot and pivot-target translation models, we initialize some parameters of the pivot side with a pre-trained language model and freeze them to encourage both translation models to work in the same pivot language space, so that they can be smoothly transferred to the source-target translation model. Experiments show that our approach can outperform previous ones.

Daniel Bogdoll, Meng Zhang, Maximilian Nitsche et al.

Great progress has been achieved in the community of autonomous driving in the past few years. As a safety-critical problem, however, anomaly detection is a huge hurdle towards a large-scale deployment of autonomous vehicles in the real world. While many approaches, such as uncertainty estimation or segmentation-based image resynthesis, are extremely promising, there is more to be explored. Especially inspired by works on anomaly detection based on image resynthesis, we propose a novel approach for anomaly detection through style transfer. We leverage generative models to map an image from its original style domain of road traffic to an arbitrary one and back to generate pixelwise anomaly scores. However, our experiments have proven our hypothesis wrong, and we were unable to produce significant results. Nevertheless, we want to share our findings, so that others can learn from our experiments.

Jianyuan Zhang, Zhiliu Yang, Meng Zhang

Large-scale semantic mapping is crucial for outdoor autonomous agents to fulfill high-level tasks such as planning and navigation. This paper proposes a novel method for large-scale 3D semantic reconstruction through implicit representations from posed LiDAR measurements alone. We first leverage an octree-based and hierarchical structure to store implicit features, then these implicit features are decoded to semantic information and signed distance value through shallow Multilayer Perceptrons (MLPs). We adopt off-the-shelf algorithms to predict the semantic labels and instance IDs of point clouds. We then jointly optimize the feature embeddings and MLPs parameters with a self-supervision paradigm for point cloud geometry and a pseudo-supervision paradigm for semantic and panoptic labels. Subsequently, categories and geometric structures for novel points are regressed, and marching cubes are exploited to subdivide and visualize the scenes in the inferring stage. For scenarios with memory constraints, a map stitching strategy is also developed to merge sub-maps into a complete map. Experiments on two real-world datasets, SemanticKITTI and SemanticPOSS, demonstrate the superior segmentation efficiency and mapping effectiveness of our framework compared to current state-of-the-art 3D LiDAR mapping methods.

Hao Cheng, Meng Zhang, Weixuan Wang et al.

Length-controllable machine translation is a type of constrained translation. It aims to contain the original meaning as much as possible while controlling the length of the translation. We can use automatic summarization or machine translation evaluation metrics for length-controllable machine translation, but this is not necessarily suitable and accurate. This work is the first attempt to evaluate the automatic metrics for length-controllable machine translation tasks systematically. We conduct a rigorous human evaluation on two translation directions and evaluate 18 summarization or translation evaluation metrics. We find that BLEURT and COMET have the highest correlation with human evaluation and are most suitable as evaluation metrics for length-controllable machine translation.

Hao Cheng, Meng Zhang, Liangyou Li et al.

Utilizing pivot language effectively can significantly improve low-resource machine translation. Usually, the two translation models, source-pivot and pivot-target, are trained individually and do not utilize the limited (source, target) parallel data. This work proposes an end-to-end training method for the cascaded translation model and configures an improved decoding algorithm. The input of the pivot-target model is modified to weighted pivot embedding based on the probability distribution output by the source-pivot model. This allows the model to be trained end-to-end. In addition, we mitigate the inconsistency between tokens and probability distributions while using beam search in pivot decoding. Experiments demonstrate that our method enhances the quality of translation.

Aoxiong Yin, Zhou Zhao, Jinglin Liu et al.

Sign language translation as a kind of technology with profound social significance has attracted growing researchers' interest in recent years. However, the existing sign language translation methods need to read all the videos before starting the translation, which leads to a high inference latency and also limits their application in real-life scenarios. To solve this problem, we propose SimulSLT, the first end-to-end simultaneous sign language translation model, which can translate sign language videos into target text concurrently. SimulSLT is composed of a text decoder, a boundary predictor, and a masked encoder. We 1) use the wait-k strategy for simultaneous translation. 2) design a novel boundary predictor based on the integrate-and-fire module to output the gloss boundary, which is used to model the correspondence between the sign language video and the gloss. 3) propose an innovative re-encode method to help the model obtain more abundant contextual information, which allows the existing video features to interact fully. The experimental results conducted on the RWTH-PHOENIX-Weather 2014T dataset show that SimulSLT achieves BLEU scores that exceed the latest end-to-end non-simultaneous sign language translation model while maintaining low latency, which proves the effectiveness of our method.

Zhixing Tan, Zeyuan Yang, Meng Zhang et al.

With the rapid development of artificial intelligence (AI), there is a trend in moving AI applications, such as neural machine translation (NMT), from cloud to mobile devices. Constrained by limited hardware resources and battery, the performance of on-device NMT systems is far from satisfactory. Inspired by conditional computation, we propose to improve the performance of on-device NMT systems with dynamic multi-branch layers. Specifically, we design a layer-wise dynamic multi-branch network with only one branch activated during training and inference. As not all branches are activated during training, we propose shared-private reparameterization to ensure sufficient training for each branch. At almost the same computational cost, our method achieves improvements of up to 1.7 BLEU points on the WMT14 English-German translation task and 1.8 BLEU points on the WMT20 Chinese-English translation task over the Transformer model, respectively. Compared with a strong baseline that also uses multiple branches, the proposed method is up to 1.5 times faster with the same number of parameters.

Xide Xia, Meng Zhang, Tianfan Xue et al.

Photorealistic style transfer is the task of transferring the artistic style of an image onto a content target, producing a result that is plausibly taken with a camera. Recent approaches, based on deep neural networks, produce impressive results but are either too slow to run at practical resolutions, or still contain objectionable artifacts. We propose a new end-to-end model for photorealistic style transfer that is both fast and inherently generates photorealistic results. The core of our approach is a feed-forward neural network that learns local edge-aware affine transforms that automatically obey the photorealism constraint. When trained on a diverse set of images and a variety of styles, our model can robustly apply style transfer to an arbitrary pair of input images. Compared to the state of the art, our method produces visually superior results and is three orders of magnitude faster, enabling real-time performance at 4K on a mobile phone. We validate our method with ablation and user studies.

Guoqing Li, Meng Zhang, Qianru Zhang et al.

In many real-time applications, the deployment of deep neural networks is constrained by high computational cost and efficient lightweight neural networks are widely concerned. In this paper, we propose that depthwise convolution (DWC) is used to expand the number of channels in a bottleneck block, which is more efficient than 1 x 1 convolution. The proposed Pointwise-Standard-Depthwise network (PSDNet) based on channel expansion with DWC has fewer number of parameters, less computational cost and higher accuracy than corresponding ResNet on CIFAR datasets. To design more efficient lightweight concolutional neural netwok, Depthwise-Pointwise-Depthwise inverted bottleneck block (DPD block) is proposed and DPDNet is designed by stacking DPD block. Meanwhile, the number of parameters of DPDNet is only about 60% of that of MobileNetV2 for networks with the same number of layers, but can achieve approximated accuracy. Additionally, two hyperparameters of DPDNet can make the trade-off between accuracy and computational cost, which makes DPDNet suitable for diverse tasks. Furthermore, we find the networks with more DWC layers outperform the networks with more 1x1 convolution layers, which indicates that extracting spatial information is more important than combining channel information.

Meng Zhang, Xinchen Liu, Wu Liu et al.

Discovering social relations in images can make machines better interpret the behavior of human beings. However, automatically recognizing social relations in images is a challenging task due to the significant gap between the domains of visual content and social relation. Existing studies separately process various features such as faces expressions, body appearance, and contextual objects, thus they cannot comprehensively capture the multi-granularity semantics, such as scenes, regional cues of persons, and interactions among persons and objects. To bridge the domain gap, we propose a Multi-Granularity Reasoning framework for social relation recognition from images. The global knowledge and mid-level details are learned from the whole scene and the regions of persons and objects, respectively. Most importantly, we explore the fine-granularity pose keypoints of persons to discover the interactions among persons and objects. Specifically, the pose-guided Person-Object Graph and Person-Pose Graph are proposed to model the actions from persons to object and the interactions between paired persons, respectively. Based on the graphs, social relation reasoning is performed by graph convolutional networks. Finally, the global features and reasoned knowledge are integrated as a comprehensive representation for social relation recognition. Extensive experiments on two public datasets show the effectiveness of the proposed framework.

Anand Avati, Stephen Pfohl, Chris Lin et al.

Identifying patients who will be discharged within 24 hours can improve hospital resource management and quality of care. We studied this problem using eight years of Electronic Health Records (EHR) data from Stanford Hospital. We fit models to predict 24 hour discharge across the entire inpatient population. The best performing models achieved an area under the receiver-operator characteristic curve (AUROC) of 0.85 and an AUPRC of 0.53 on a held out test set. This model was also well calibrated. Finally, we analyzed the utility of this model in a decision theoretic framework to identify regions of ROC space in which using the model increases expected utility compared to the trivial always negative or always positive classifiers.

Qianru Zhang, Meng Zhang, Tinghuan Chen et al.

In recent years, convolutional neural networks (CNNs) have shown great performance in various fields such as image classification, pattern recognition, and multi-media compression. Two of the feature properties, local connectivity and weight sharing, can reduce the number of parameters and increase processing speed during training and inference. However, as the dimension of data becomes higher and the CNN architecture becomes more complicated, the end-to-end approach or the combined manner of CNN is computationally intensive, which becomes limitation to CNN's further implementation. Therefore, it is necessary and urgent to implement CNN in a faster way. In this paper, we first summarize the acceleration methods that contribute to but not limited to CNN by reviewing a broad variety of research papers. We propose a taxonomy in terms of three levels, i.e.~structure level, algorithm level, and implementation level, for acceleration methods. We also analyze the acceleration methods in terms of CNN architecture compression, algorithm optimization, and hardware-based improvement. At last, we give a discussion on different perspectives of these acceleration and optimization methods within each level. The discussion shows that the methods in each level still have large exploration space. By incorporating such a wide range of disciplines, we expect to provide a comprehensive reference for researchers who are interested in CNN acceleration.