Kenji Suzuki

Naoki Matsunaga, Masato Ishii, Akio Hayakawa et al.

Our goal is to develop fine-grained real-image editing methods suitable for real-world applications. In this paper, we first summarize four requirements for these methods and propose a novel diffusion-based image editing framework with pixel-wise guidance that satisfies these requirements. Specifically, we train pixel-classifiers with a few annotated data and then infer the segmentation map of a target image. Users then manipulate the map to instruct how the image will be edited. We utilize a pre-trained diffusion model to generate edited images aligned with the user's intention with pixel-wise guidance. The effective combination of proposed guidance and other techniques enables highly controllable editing with preserving the outside of the edited area, which results in meeting our requirements. The experimental results demonstrate that our proposal outperforms the GAN-based method for editing quality and speed.

Wahyu Rahmaniar, Kenji Suzuki

Traditional deep learning models often lack annotated data, especially in cross-domain applications such as anomaly detection, which is critical for early disease diagnosis in medicine and defect detection in industry. To address this challenge, we propose Multi-AD, a convolutional neural network (CNN) model for robust unsupervised anomaly detection across medical and industrial images. Our approach employs the squeeze-and-excitation (SE) block to enhance feature extraction via channel-wise attention, enabling the model to focus on the most relevant features and detect subtle anomalies. Knowledge distillation (KD) transfers informative features from the teacher to the student model, enabling effective learning of the differences between normal and anomalous data. Then, the discriminator network further enhances the model's capacity to distinguish between normal and anomalous data. At the inference stage, by integrating multi-scale features, the student model can detect anomalies of varying sizes. The teacher-student (T-S) architecture ensures consistent representation of high-dimensional features while adapting them to enhance anomaly detection. Multi-AD was evaluated on several medical datasets, including brain MRI, liver CT, and retina OCT, as well as industrial datasets, such as MVTec AD, demonstrating strong generalization across multiple domains. Experimental results demonstrated that our approach consistently outperformed state-of-the-art models, achieving the best average AUROC for both image-level (81.4% for medical and 99.6% for industrial) and pixel-level (97.0% for medical and 98.4% for industrial) tasks, making it effective for real-world applications.

Kazuaki Mishima, Antoni Bigata Casademunt, Stavros Petridis et al.

Human facial images encode a rich spectrum of information, encompassing both stable identity-related traits and mutable attributes such as pose, expression, and emotion. While recent advances in image generation have enabled high-quality identity-conditional face synthesis, precise control over non-identity attributes remains challenging, and disentangling identity from these mutable factors is particularly difficult. To address these limitations, we propose a novel identity-conditional diffusion model that introduces two lightweight control modules designed to independently manipulate facial pose, expression, and emotion without compromising identity preservation. These modules are embedded within the cross-attention layers of the base diffusion model, enabling precise attribute control with minimal parameter overhead. Furthermore, our tailored training strategy, which leverages cross-attention between the identity feature and each non-identity control feature, encourages identity features to remain orthogonal to control signals, enhancing controllability and diversity. Quantitative and qualitative evaluations, along with perceptual user studies, demonstrate that our method surpasses existing approaches in terms of control accuracy over pose, expression, and emotion, while also improving generative diversity under identity-only conditioning.

Zhipeng Deng, Yuqiao Yang, Kenji Suzuki

Federated Learning (FL) enables multiple institutes to train models collaboratively without sharing private data. Current FL research focuses on communication efficiency, privacy protection, and personalization and assumes that the data of FL have already been ideally collected. In medical scenarios, however, data annotation demands both expertise and intensive labor, which is a critical problem in FL. Active learning (AL), has shown promising performance in reducing the number of data annotations in medical image analysis. We propose a federated AL (FedAL) framework in which AL is executed periodically and interactively under FL. We exploit a local model in each hospital and a global model acquired from FL to construct an ensemble. We use ensemble-entropy-based AL as an efficient data-annotation strategy in FL. Therefore, our FedAL framework can decrease the amount of annotated data and preserve patient privacy while maintaining the performance of FL. To our knowledge, this is the first FedAL framework applied to medical images. We validated our framework on real-world dermoscopic datasets. Using only 50% of samples, our framework was able to achieve state-of-the-art performance on a skin-lesion classification task. Our framework performed better than several state-of-the-art AL methods under FL and achieved comparable performance to full-data FL.

Diego Paez-Granados, Hideki Kadone, Modar Hassan et al.

We present a personal mobility device for lower-body impaired users through a light-weighted exoskeleton on wheels. On its core, a novel passive exoskeleton provides postural transition leveraging natural body postures with support to the trunk on sit-to-stand and stand-to-sit (STS) transitions by a single gas spring as an energy storage unit. We propose a direction-dependent coupling of knees and hip joints through a double-pulley wire system, transferring energy from the torso motion towards balancing the moment load at the knee joint actuator. Herewith, the exoskeleton maximizes energy transfer and the naturalness of the user's movement. We introduce an embodied user interface for hands-free navigation through a torso pressure sensing with minimal trunk rotations, resulting on average $19^{\circ} \pm 13^{\circ}$ on six unimpaired users. We evaluated the design for STS assistance on 11 unimpaired users observing motions and muscle activity during the transitions. Results comparing assisted and unassisted STS transitions validated a significant reduction (up to $68\%$ $p<0.01$) at the involved muscle groups. Moreover, we showed it feasible through natural torso leaning movements of $+12^{\circ}\pm 6.5^{\circ}$ and $- 13.7^{\circ} \pm 6.1^{\circ}$ for standing and sitting, respectively. Passive postural transition assistance warrants further work on increasing its applicability and broadening the user population.

Yang Chen, Diego Paez-Granados, Bruno Leme et al.

This work proposes an autonomous docking control for nonholonomic constrained mobile robots and applies it to an intelligent mobility device or wheelchair for assisting the user in approaching resting furniture such as a chair or a bed. We defined a virtual landmark inferred from the target docking destination. Then, we solve the problem of keeping the targeted volume inside the field of view (FOV) of a tracking camera and docking to the virtual landmark through a novel definition that enables to control for the desired end-pose. In this article, we proposed a nonlinear feedback controller to perform the docking with the depth camera's FOV as a constraint. Then, a numerical method is proposed to find the feasible space of initial states where convergence could be guaranteed. Finally, the entire system was embedded for real-time operation on a standing wheelchair with the virtual landmark estimation by 3D object tracking with an RGB-D camera and we validated the effectiveness in simulation and experimental evaluations. The results show the guaranteed convergence for the feasible space depending on the virtual landmark location. In the implementation, the robot converges to the virtual landmark while respecting the FOV constraints.

Monica Perusquia-Hernandez, Felix Dollack, Chun Kwang Tan et al.

Distal facial Electromyography (EMG) can be used to detect smiles and frowns with reasonable accuracy. It capitalizes on volume conduction to detect relevant muscle activity, even when the electrodes are not placed directly on the source muscle. The main advantage of this method is to prevent occlusion and obstruction of the facial expression production, whilst allowing EMG measurements. However, measuring EMG distally entails that the exact source of the facial movement is unknown. We propose a novel method to estimate specific Facial Action Units (AUs) from distal facial EMG and Computer Vision (CV). This method is based on Independent Component Analysis (ICA), Non-Negative Matrix Factorization (NNMF), and sorting of the resulting components to determine which is the most likely to correspond to each CV-labeled action unit (AU). Performance on the detection of AU06 (Orbicularis Oculi) and AU12 (Zygomaticus Major) was estimated by calculating the agreement with Human Coders. The results of our proposed algorithm showed an accuracy of 81% and a Cohen's Kappa of 0.49 for AU6; and accuracy of 82% and a Cohen's Kappa of 0.53 for AU12. This demonstrates the potential of distal EMG to detect individual facial movements. Using this multimodal method, several AU synergies were identified. We quantified the co-occurrence and timing of AU6 and AU12 in posed and spontaneous smiles using the human-coded labels, and for comparison, using the continuous CV-labels. The co-occurrence analysis was also performed on the EMG-based labels to uncover the relationship between muscle synergies and the kinematics of visible facial movement.

Floris Erich, Masakazu Hirokawa, Kenji Suzuki

We perform a Systematic Literature Review to discover how Humanoid robots are being applied in Socially Assistive Robotics experiments. Our search returned 24 papers, from which 16 were included for closer analysis. To do this analysis we used a conceptual framework inspired by Behavior-based Robotics. We were interested in finding out which robot was used (most use the robot NAO), what the goals of the application were (teaching, assisting, playing, instructing), how the robot was controlled (manually in most of the experiments), what kind of behaviors the robot exhibited (reacting to touch, pointing at body parts, singing a song, dancing, among others), what kind of actuators the robot used (always motors, sometimes speakers, hardly ever any other type of actuator) and what kind of sensors the robot used (in many studies the robot did not use any sensors at all, in others the robot frequently used camera and/or microphone). The results of this study can be used for designing software frameworks targeting Humanoid Socially Assistive Robotics, especially in the context of Software Product Line Engineering projects.