Zhaoyu Wang

Ian Dobson, NichelleLe K. Carrington, Kai Zhou et al.

We describe some bulk statistics of historical initial line outages and the implications for forming contingency lists and understanding which initial outages are likely to lead to further cascading. We use historical outage data to estimate the effect of weather on cascading via cause codes and via NOAA storm data. Bad weather significantly increases outage rates and interacts with cascading effects, and should be accounted for in cascading models and simulations. We suggest how weather effects can be incorporated into the OPA cascading simulation and validated. There are very good prospects for improving data processing and models for the bulk statistics of historical outage data so that cascading can be better understood and quantified.

Feixiang Zhang, Hongyi Li, Bai Cui et al.

The aggregate flexibility region of distributed energy resources (DERs) quantifies the aggregate power shaping capabilities of DERs. It characterizes the distribution network's potential for wholesale market participation and grid service provision at the transmission level. To enhance flexibility and fully exploit the potential of DERs, this paper proposes a method to optimize the aggregate flexibility region through distribution network reconfiguration. First, we formulate the ellipsoidal aggregate flexibility region characterization problem as a two-stage adaptive robust optimization problem and derive an exact convex reformulation with a large number of second-order cone constraints. By exploiting the problem structure, we propose a scalable Benders decomposition algorithm with provable finite convergence to the optimal solution. Finally, we propose an optimal reconfiguration problem for aggregate flexibility region optimization and solve it using the custom Benders decomposition. Numerical simulations on the IEEE 123-bus test feeder demonstrate that, compared to existing approaches, substantial improvements in the aggregate flexibility region can be achieved over multiple scenarios with the optimized topology.

Zhaoyu Wang, Pingchuan Ma, Shuai Wang

Understanding causal relations is vital in scientific discovery. The process of causal structure learning involves identifying causal graphs from observational data to understand such relations. Usually, a central server performs this task, but sharing data with the server poses privacy risks. Federated learning can solve this problem, but existing solutions for federated causal structure learning make unrealistic assumptions about data and lack convergence guarantees. FedC2SL is a federated constraint-based causal structure learning scheme that learns causal graphs using a federated conditional independence test, which examines conditional independence between two variables under a condition set without collecting raw data from clients. FedC2SL requires weaker and more realistic assumptions about data and offers stronger resistance to data variability among clients. FedPC and FedFCI are the two variants of FedC2SL for causal structure learning in causal sufficiency and causal insufficiency, respectively. The study evaluates FedC2SL using both synthetic datasets and real-world data against existing solutions and finds it demonstrates encouraging performance and strong resilience to data heterogeneity among clients.

Alok Kumar Bharati, Venkataramana Ajjarapu, Zhaoyu Wang

This paper analyses the impact of conservation by voltage reduction (CVR) on voltage stability margin (VSM) considering transmission and distribution (T&D) systems. VSM is determined by P-V curve analysis using PSSE and GridLAB-D solvers to co-simulate the T&D systems under CVR and No CVR conditions. ZIP loads with profile [ZIP] = [0.4 0.3 0.3] are used to model the load. The paper discusses the counterintuitive result: under CVR, the VSM is reduced. Theoretical justification for the reduced VSM under CVR is the increase in the effective impedance between generation and load and this is proved using an extended 2-bus system. The paper shares T&D co-simulation results with IEEE 9-bus transmission system and a larger 123-bus distribution system and with distributed generation (DG) in unity power factor (UPF) and volt-VAR control (VVC) mode.

Team GLM, Aohan Zeng, Bin Xu et al.

We introduce ChatGLM, an evolving family of large language models that we have been developing over time. This report primarily focuses on the GLM-4 language series, which includes GLM-4, GLM-4-Air, and GLM-4-9B. They represent our most capable models that are trained with all the insights and lessons gained from the preceding three generations of ChatGLM. To date, the GLM-4 models are pre-trained on ten trillions of tokens mostly in Chinese and English, along with a small set of corpus from 24 languages, and aligned primarily for Chinese and English usage. The high-quality alignment is achieved via a multi-stage post-training process, which involves supervised fine-tuning and learning from human feedback. Evaluations show that GLM-4 1) closely rivals or outperforms GPT-4 in terms of general metrics such as MMLU, GSM8K, MATH, BBH, GPQA, and HumanEval, 2) gets close to GPT-4-Turbo in instruction following as measured by IFEval, 3) matches GPT-4 Turbo (128K) and Claude 3 for long context tasks, and 4) outperforms GPT-4 in Chinese alignments as measured by AlignBench. The GLM-4 All Tools model is further aligned to understand user intent and autonomously decide when and which tool(s) touse -- including web browser, Python interpreter, text-to-image model, and user-defined functions -- to effectively complete complex tasks. In practical applications, it matches and even surpasses GPT-4 All Tools in tasks like accessing online information via web browsing and solving math problems using Python interpreter. Over the course, we have open-sourced a series of models, including ChatGLM-6B (three generations), GLM-4-9B (128K, 1M), GLM-4V-9B, WebGLM, and CodeGeeX, attracting over 10 million downloads on Hugging face in the year 2023 alone. The open models can be accessed through https://github.com/THUDM and https://huggingface.co/THUDM.

Corinne Aars, Lauren Adams, Xiaokan Tian et al.

This study presents the development and evaluation of a ByT5-based multilingual translation model tailored for translating the Bible into underrepresented languages. Utilizing the comprehensive Johns Hopkins University Bible Corpus, we trained the model to capture the intricate nuances of character-based and morphologically rich languages. Our results, measured by the BLEU score and supplemented with sample translations, suggest the model can improve accessibility to sacred texts. It effectively handles the distinctive biblical lexicon and structure, thus bridging the linguistic divide. The study also discusses the model's limitations and suggests pathways for future enhancements, focusing on expanding access to sacred literature across linguistic boundaries.

Rong Yan, Yuxuan Yuan, Zhaoyu Wang et al.

Real active distribution networks with associated smart meter (SM) data are critical for power researchers. However, it is practically difficult for researchers to obtain such comprehensive datasets from utilities due to privacy concerns. To bridge this gap, an implicit generative model with Wasserstein GAN objectives, namely unbalanced graph generative adversarial network (UG-GAN), is designed to generate synthetic three-phase unbalanced active distribution system connectivity. The basic idea is to learn the distribution of random walks both over a real-world system and across each phase of line segments, capturing the underlying local properties of an individual real-world distribution network and generating specific synthetic networks accordingly. Then, to create a comprehensive synthetic test case, a network correction and extension process is proposed to obtain time-series nodal demands and standard distribution grid components with realistic parameters, including distributed energy resources (DERs) and capacity banks. A Midwest distribution system with 1-year SM data has been utilized to validate the performance of our method. Case studies with several power applications demonstrate that synthetic active networks generated by the proposed framework can mimic almost all features of real-world networks while avoiding the disclosure of confidential information.

Yuxuan Yuan, Kaveh Dehghanpour, Zhaoyu Wang et al.

Due to increasing penetration of volatile distributed photovoltaic (PV) resources, real-time monitoring of customers at the grid-edge has become a critical task. However, this requires solving the distribution system state estimation (DSSE) jointly for both primary and secondary levels of distribution grids, which is computationally complex and lacks scalability to large systems. To achieve near real-time solutions for DSSE, we present a novel hierarchical reinforcement learning-aided framework: at the first layer, a weighted least squares (WLS) algorithm solves the DSSE over primary medium-voltage feeders; at the second layer, deep actor-critic (A-C) modules are trained for each secondary transformer using measurement residuals to estimate the states of low-voltage circuits and capture the impact of PVs at the grid-edge. While the A-C parameter learning process takes place offline, the trained A-C modules are deployed online for fast secondary grid state estimation; this is the key factor in scalability and computational efficiency of the framework. To maintain monitoring accuracy, the two levels exchange boundary information with each other at the secondary nodes, including transformer voltages (first layer to second layer) and active/reactive total power injection (second layer to first layer). This interactive information passing strategy results in a closed-loop structure that is able to track optimal solutions at both layers in few iterations. Moreover, our model can handle the topology changes using the Jacobian matrices of the first layer. We have performed numerical experiments using real utility data and feeder models to verify the performance of the proposed framework.

Yuxuan Yuan, Kaveh Dehghanpour, Zhaoyu Wang et al.

Efficient outage location is critical to enhancing the resilience of power distribution systems. However, accurate outage location requires combining massive evidence received from diverse data sources, including smart meter (SM) last gasp signals, customer trouble calls, social media messages, weather data, vegetation information, and physical parameters of the network. This is a computationally complex task due to the high dimensionality of data in distribution grids. In this paper, we propose a multi-source data fusion approach to locate outage events in partially observable distribution systems using Bayesian networks (BNs). A novel aspect of the proposed approach is that it takes multi-source evidence and the complex structure of distribution systems into account using a probabilistic graphical method. Our method can radically reduce the computational complexity of outage location inference in high-dimensional spaces. The graphical structure of the proposed BN is established based on the network's topology and the causal relationship between random variables, such as the states of branches/customers and evidence. Utilizing this graphical model, accurate outage locations are obtained by leveraging a Gibbs sampling (GS) method, to infer the probabilities of de-energization for all branches. Compared with commonly-used exact inference methods that have exponential complexity in the size of the BN, GS quantifies the target conditional probability distributions in a timely manner. A case study of several real-world distribution systems is presented to validate the proposed method.

Yichen Zhang, Feng Qiu, Tianqi Hong et al.

Self-healing capability is one of the most critical factors for a resilient distribution system, which requires intelligent agents to automatically perform restorative actions online, including network reconfiguration and reactive power dispatch. These agents should be equipped with a predesigned decision policy to meet real-time requirements and handle highly complex $N-k$ scenarios. The disturbance randomness hampers the application of exploration-dominant algorithms like traditional reinforcement learning (RL), and the agent training problem under $N-k$ scenarios has not been thoroughly solved. In this paper, we propose the imitation learning (IL) framework to train such policies, where the agent will interact with an expert to learn its optimal policy, and therefore significantly improve the training efficiency compared with the RL methods. To handle tie-line operations and reactive power dispatch simultaneously, we design a hybrid policy network for such a discrete-continuous hybrid action space. We employ the 33-node system under $N-k$ disturbances to verify the proposed framework.

Mahdi Khodayar, Jianhui Wang, Zhaoyu Wang

Power system studies require the topological structures of real-world power networks; however, such data is confidential due to important security concerns. Thus, power grid synthesis (PGS), i.e., creating realistic power grids that imitate actual power networks, has gained significant attention. In this letter, we cast PGS into a graph distribution learning (GDL) problem where the probability distribution functions (PDFs) of the nodes (buses) and edges (lines) are captured. A novel deep GDL (DeepGDL) model is proposed to learn the topological patterns of buses/lines with their physical features (e.g., power injection and line impedance). Having a deep nonlinear recurrent structure, DeepGDL understands complex nonlinear topological properties and captures the graph PDF. Sampling from the obtained PDF, we are able to create a large set of realistic networks that all resemble the original power grid. Simulation results show the significant accuracy of our created synthetic power grids in terms of various topological metrics and power flow measurements.

Mahdi Khodayar, Jianhui Wang, Zhaoyu Wang

This paper addresses the energy disaggregation problem, i.e. decomposing the electricity signal of a whole home to its operating devices. First, we cast the problem as a dictionary learning (DL) problem where the key electricity patterns representing consumption behaviors are extracted for each device and stored in a dictionary matrix. The electricity signal of each device is then modeled by a linear combination of such patterns with sparse coefficients that determine the contribution of each device in the total electricity. Although popular, the classic DL approach is prone to high error in real-world applications including energy disaggregation, as it merely finds linear dictionaries. Moreover, this method lacks a recurrent structure; thus, it is unable to leverage the temporal structure of energy signals. Motivated by such shortcomings, we propose a novel optimization program where the dictionary and its sparse coefficients are optimized simultaneously with a deep neural model extracting powerful nonlinear features from the energy signals. A long short-term memory auto-encoder (LSTM-AE) is proposed with tunable time dependent states to capture the temporal behavior of energy signals for each device. We learn the dictionary in the space of temporal features captured by the LSTM-AE rather than the original space of the energy signals; hence, in contrast to the traditional DL, here, a nonlinear dictionary is learned using powerful temporal features extracted from our deep model. Real experiments on the publicly available Reference Energy Disaggregation Dataset (REDD) show significant improvement compared to the state-of-the-art methodologies in terms of the disaggregation accuracy and F-score metrics.