Chunxia Zhang

H. T. Wang, J. S. Zhang, Z. X. Zhao et al.

Velocity picking, a critical step in seismic data processing, has been studied for decades. Although manual picking can produce accurate normal moveout (NMO) velocities from the velocity spectra of prestack gathers, it is time-consuming and becomes infeasible with the emergence of large amount of seismic data. Numerous automatic velocity picking methods have thus been developed. In recent years, deep learning (DL) methods have produced good results on the seismic data with medium and high signal-to-noise ratios (SNR). Unfortunately, it still lacks a picking method to automatically generate accurate velocities in the situations of low SNR. In this paper, we propose a multi-information fusion network (MIFN) to estimate stacking velocity from the fusion information of velocity spectra and stack gather segments (SGS). In particular, we transform the velocity picking problem into a semantic segmentation problem based on the velocity spectrum images. Meanwhile, the information provided by SGS is used as a prior in the network to assist segmentation. The experimental results on two field datasets show that the picking results of MIFN are stable and accurate for the scenarios with medium and high SNR, and it also performs well in low SNR scenarios.

H. T. Wang, J. S. Zhang, C. X. Zhang et al.

Seismic velocity picking algorithms that are both accurate and efficient can greatly speed up seismic data processing, with the primary approach being the use of velocity spectra. Despite the development of some supervised deep learning-based approaches to automatically pick the velocity, they often come with costly manual labeling expenses or lack interpretability. In comparison, using physical knowledge to drive unsupervised learning techniques has the potential to solve this problem in an efficient manner. We suggest an Unsupervised Ensemble Learning (UEL) approach to achieving a balance between reliance on labeled data and picking accuracy, with the aim of determining the stack velocity. UEL makes use of the data from nearby velocity spectra and other known sources to help pick efficient and reasonable velocity points, which are acquired through a clustering technique. Testing on both the synthetic and field data sets shows that UEL is more reliable and precise in auto-picking than traditional clustering-based techniques and the widely used Convolutional Neural Network (CNN) method.

Shuang Xu, Jiangshe Zhang, Kai Sun et al.

Pansharpening is a fundamental issue in remote sensing field. This paper proposes a side information partially guided convolutional sparse coding (SCSC) model for pansharpening. The key idea is to split the low resolution multispectral image into a panchromatic image related feature map and a panchromatic image irrelated feature map, where the former one is regularized by the side information from panchromatic images. With the principle of algorithm unrolling techniques, the proposed model is generalized as a deep neural network, called as SCSC pansharpening neural network (SCSC-PNN). Compared with 13 classic and state-of-the-art methods on three satellites, the numerical experiments show that SCSC-PNN is superior to others. The codes are available at https://github.com/xsxjtu/SCSC-PNN.

Shuang Xu, Lizhen Ji, Zhe Wang et al.

Multi-focus image fusion (MFF) is a popular technique to generate an all-in-focus image, where all objects in the scene are sharp. However, existing methods pay little attention to defocus spread effects of the real-world multi-focus images. Consequently, most of the methods perform badly in the areas near focus map boundaries. According to the idea that each local region in the fused image should be similar to the sharpest one among source images, this paper presents an optimization-based approach to reduce defocus spread effects. Firstly, a new MFF assessmentmetric is presented by combining the principle of structure similarity and detected focus maps. Then, MFF problem is cast into maximizing this metric. The optimization is solved by gradient ascent. Experiments conducted on the real-world dataset verify superiority of the proposed model. The codes are available at https://github.com/xsxjtu/MFF-SSIM.

Haowen Bai, Zixiang Zhao, Jiangshe Zhang et al.

Multi-modal image fusion synthesizes information from multiple sources into a single image, facilitating downstream tasks such as semantic segmentation. Current approaches primarily focus on acquiring informative fusion images at the visual display stratum through intricate mappings. Although some approaches attempt to jointly optimize image fusion and downstream tasks, these efforts often lack direct guidance or interaction, serving only to assist with a predefined fusion loss. To address this, we propose an ``Unfolding Attribution Analysis Fusion network'' (UAAFusion), using attribution analysis to tailor fused images more effectively for semantic segmentation, enhancing the interaction between the fusion and segmentation. Specifically, we utilize attribution analysis techniques to explore the contributions of semantic regions in the source images to task discrimination. At the same time, our fusion algorithm incorporates more beneficial features from the source images, thereby allowing the segmentation to guide the fusion process. Our method constructs a model-driven unfolding network that uses optimization objectives derived from attribution analysis, with an attribution fusion loss calculated from the current state of the segmentation network. We also develop a new pathway function for attribution analysis, specifically tailored to the fusion tasks in our unfolding network. An attribution attention mechanism is integrated at each network stage, allowing the fusion network to prioritize areas and pixels crucial for high-level recognition tasks. Additionally, to mitigate the information loss in traditional unfolding networks, a memory augmentation module is incorporated into our network to improve the information flow across various network layers. Extensive experiments demonstrate our method's superiority in image fusion and applicability to semantic segmentation.

Hongtao Wang, Li Long, Jiangshe Zhang et al.

Contemporary automatic first break (FB) picking methods typically analyze 1D signals, 2D source gathers, or 3D source-receiver gathers. Utilizing higher-dimensional data, such as 2D or 3D, incorporates global features, improving the stability of local picking. Despite the benefits, high-dimensional data requires structured input and increases computational demands. Addressing this, we propose a novel approach using deep graph learning called DGL-FB, constructing a large graph to efficiently extract information. In this graph, each seismic trace is represented as a node, connected by edges that reflect similarities. To manage the size of the graph, we develop a subgraph sampling technique to streamline model training and inference. Our proposed framework, DGL-FB, leverages deep graph learning for FB picking. It encodes subgraphs into global features using a deep graph encoder. Subsequently, the encoded global features are combined with local node signals and fed into a ResUNet-based 1D segmentation network for FB detection. Field survey evaluations of DGL-FB show superior accuracy and stability compared to a 2D U-Net-based benchmark method.

Haowen Bai, Zixiang Zhao, Jiangshe Zhang et al.

First-break picking is a pivotal procedure in processing microseismic data for geophysics and resource exploration. Recent advancements in deep learning have catalyzed the evolution of automated methods for identifying first-break. Nevertheless, the complexity of seismic data acquisition and the requirement for detailed, expert-driven labeling often result in outliers and potential mislabeling within manually labeled datasets. These issues can negatively affect the training of neural networks, necessitating algorithms that handle outliers or mislabeled data effectively. We introduce the Simultaneous Picking and Refinement (SPR) algorithm, designed to handle datasets plagued by outlier samples or even noisy labels. Unlike conventional approaches that regard manual picks as ground truth, our method treats the true first-break as a latent variable within a probabilistic model that includes a first-break labeling prior. SPR aims to uncover this variable, enabling dynamic adjustments and improved accuracy across the dataset. This strategy mitigates the impact of outliers or inaccuracies in manual labels. Intra-site picking experiments and cross-site generalization experiments on publicly available data confirm our method's performance in identifying first-break and its generalization across different sites. Additionally, our investigations into noisy signals and labels underscore SPR's resilience to both types of noise and its capability to refine misaligned manual annotations. Moreover, the flexibility of SPR, not being limited to any single network architecture, enhances its adaptability across various deep learning-based picking methods. Focusing on learning from data that may contain outliers or partial inaccuracies, SPR provides a robust solution to some of the principal obstacles in automatic first-break picking.

Xiaoli Wei, Zhaoqing Wang, Yandong Guo et al.

Interactive video object segmentation is a crucial video task, having various applications from video editing to data annotating. However, current approaches struggle to accurately segment objects across diverse domains. Recently, Segment Anything Model (SAM) introduces interactive visual prompts and demonstrates impressive performance across different domains. In this paper, we propose a training-free prompt tracking framework for interactive video object segmentation (I-PT), leveraging the powerful generalization of SAM. Although point tracking efficiently captures the pixel-wise information of objects in a video, points tend to be unstable when tracked over a long period, resulting in incorrect segmentation. Towards fast and robust interaction, we jointly adopt sparse points and boxes tracking, filtering out unstable points and capturing object-wise information. To better integrate reference information from multiple interactions, we introduce a cross-round space-time module (CRSTM), which adaptively aggregates mask features from previous rounds and frames, enhancing the segmentation stability. Our framework has demonstrated robust zero-shot video segmentation results on popular VOS datasets with interaction types, including DAVIS 2017, YouTube-VOS 2018, and MOSE 2023, maintaining a good tradeoff between performance and interaction time.

Hongtao Wang, Jiangshe Zhang, Xiaoli Wei et al.

In seismic exploration, first break (FB) picking is a crucial aspect in the determination of subsurface velocity models, significantly influencing the placement of wells. Many deep neural networks (DNNs)-based automatic picking methods have been proposed to accelerate this processing. Significantly, the segmentation-based DNN methods provide a segmentation map and then estimate FB from the map using a picking threshold. However, the uncertainty of the results picked by DNNs still needs to be analyzed. Thus, the automatic picking methods applied in field datasets can not ensure robustness, especially in the case of a low signal-to-noise ratio (SNR). In this paper, we introduce uncertainty quantification into the FB picking task and propose a novel uncertainty-based picking deep learning network called UPNet. UPNet not only estimates the uncertainty of network output but also can filter the pickings with low confidence. Many experiments evaluate that UPNet exhibits higher accuracy and robustness than the deterministic DNN-based model, achieving State-of-the-Art (SOTA) performance in field surveys. In addition, we verify that the measurement uncertainty is meaningful, which can provide a reference for human decision-making.

Zixiang Zhao, Jiangshe Zhang, Shuang Xu et al.

Pansharpening is a widely used image enhancement technique for remote sensing. Its principle is to fuse the input high-resolution single-channel panchromatic (PAN) image and low-resolution multi-spectral image and to obtain a high-resolution multi-spectral (HRMS) image. The existing deep learning pansharpening method has two shortcomings. First, features of two input images need to be concatenated along the channel dimension to reconstruct the HRMS image, which makes the importance of PAN images not prominent, and also leads to high computational cost. Second, the implicit information of features is difficult to extract through the manually designed loss function. To this end, we propose a generative adversarial network via the fast guided filter (FGF) for pansharpening. In generator, traditional channel concatenation is replaced by FGF to better retain the spatial information while reducing the number of parameters. Meanwhile, the fusion objects can be highlighted by the spatial attention module. In addition, the latent information of features can be preserved effectively through adversarial training. Numerous experiments illustrate that our network generates high-quality HRMS images that can surpass existing methods, and with fewer parameters.

Yicheng Wang, Shuang Xu, Junmin Liu et al.

Multi-Focus Image Fusion (MFIF) is a promising image enhancement technique to obtain all-in-focus images meeting visual needs and it is a precondition of other computer vision tasks. One of the research trends of MFIF is to avoid the defocus spread effect (DSE) around the focus/defocus boundary (FDB). In this paper,we propose a network termed MFIF-GAN to attenuate the DSE by generating focus maps in which the foreground region are correctly larger than the corresponding objects. The Squeeze and Excitation Residual module is employed in the network. By combining the prior knowledge of training condition, this network is trained on a synthetic dataset based on an α-matte model. In addition, the reconstruction and gradient regularization terms are combined in the loss functions to enhance the boundary details and improve the quality of fused images. Extensive experiments demonstrate that the MFIF-GAN outperforms several state-of-the-art (SOTA) methods in visual perception, quantitative analysis as well as efficiency. Moreover, the edge diffusion and contraction module is firstly proposed to verify that focus maps generated by our method are accurate at the pixel level.

Zixiang Zhao, Jiangshe Zhang, Shuang Xu et al.

Infrared and visible image fusion, as a hot topic in image processing and image enhancement, aims to produce fused images retaining the detail texture information in visible images and the thermal radiation information in infrared images. A critical step for this issue is to decompose features in different scales and to merge them separately. In this paper, we propose a novel dual-stream auto-encoder (AE) based fusion network. The core idea is that the encoder decomposes an image into base and detail feature maps with low- and high-frequency information, respectively, and that the decoder is responsible for the original image reconstruction. To this end, a well-designed loss function is established to make the base/detail feature maps similar/dissimilar. In the test phase, base and detail feature maps are respectively merged via an additional fusion layer, which contains a saliency weighted-based spatial attention module and a channel attention module to adaptively preserve more information from source images and to highlight the objects. Then the fused image is recovered by the decoder. Qualitative and quantitative results demonstrate that our method can generate fusion images containing highlighted targets and abundant detail texture information with strong reproducibility and meanwhile is superior to the state-of-the-art (SOTA) approaches.

Shuang Xu, Zixiang Zhao, Yicheng Wang et al.

Image fusion is a significant problem in many fields including digital photography, computational imaging and remote sensing, to name but a few. Recently, deep learning has emerged as an important tool for image fusion. This paper presents three deep convolutional sparse coding (CSC) networks for three kinds of image fusion tasks (i.e., infrared and visible image fusion, multi-exposure image fusion, and multi-modal image fusion). The CSC model and the iterative shrinkage and thresholding algorithm are generalized into dictionary convolution units. As a result, all hyper-parameters are learned from data. Our extensive experiments and comprehensive comparisons reveal the superiority of the proposed networks with regard to quantitative evaluation and visual inspection.

Zixiang Zhao, Shuang Xu, Jiangshe Zhang et al.

Infrared and visible image fusion (IVIF) expects to obtain images that retain thermal radiation information from infrared images and texture details from visible images. In this paper, a model-based convolutional neural network (CNN) model, referred to as Algorithm Unrolling Image Fusion (AUIF), is proposed to overcome the shortcomings of traditional CNN-based IVIF models. The proposed AUIF model starts with the iterative formulas of two traditional optimization models, which are established to accomplish two-scale decomposition, i.e., separating low-frequency base information and high-frequency detail information from source images. Then the algorithm unrolling is implemented where each iteration is mapped to a CNN layer and each optimization model is transformed into a trainable neural network. Compared with the general network architectures, the proposed framework combines the model-based prior information and is designed more reasonably. After the unrolling operation, our model contains two decomposers (encoders) and an additional reconstructor (decoder). In the training phase, this network is trained to reconstruct the input image. While in the test phase, the base (or detail) decomposed feature maps of infrared/visible images are merged respectively by an extra fusion layer, and then the decoder outputs the fusion image. Qualitative and quantitative comparisons demonstrate the superiority of our model, which can robustly generate fusion images containing highlight targets and legible details, exceeding the state-of-the-art methods. Furthermore, our network has fewer weights and faster speed.

Zixiang Zhao, Shuang Xu, Chunxia Zhang et al.

Infrared and visible image fusion has been a hot issue in image fusion. In this task, a fused image containing both the gradient and detailed texture information of visible images as well as the thermal radiation and highlighting targets of infrared images is expected to be obtained. In this paper, a novel Bayesian fusion model is established for infrared and visible images. In our model, the image fusion task is cast into a regression problem. To measure the variable uncertainty, we formulate the model in a hierarchical Bayesian manner. Aiming at making the fused image satisfy human visual system, the model incorporates the total-variation(TV) penalty. Subsequently, the model is efficiently inferred by the expectation-maximization(EM) algorithm. We test our algorithm on TNO and NIR image fusion datasets with several state-of-the-art approaches. Compared with the previous methods, the novel model can generate better fused images with high-light targets and rich texture details, which can improve the reliability of the target automatic detection and recognition system.

Shuang Xu, Xiaoli Wei, Chunxia Zhang et al.

Multi-focus image fusion (MFF) is a fundamental task in the field of computational photography. Current methods have achieved significant performance improvement. It is found that current methods are evaluated on simulated image sets or Lytro dataset. Recently, a growing number of researchers pay attention to defocus spread effect, a phenomenon of real-world multi-focus images. Nonetheless, defocus spread effect is not obvious in simulated or Lytro datasets, where popular methods perform very similar. To compare their performance on images with defocus spread effect, this paper constructs a new dataset called MFF in the wild (MFFW). It contains 19 pairs of multi-focus images collected on the Internet. We register all pairs of source images, and provide focus maps and reference images for part of pairs. Compared with Lytro dataset, images in MFFW significantly suffer from defocus spread effect. In addition, the scenes of MFFW are more complex. The experiments demonstrate that most state-of-the-art methods on MFFW dataset cannot robustly generate satisfactory fusion images. MFFW can be a new baseline dataset to test whether an MMF algorithm is able to deal with defocus spread effect.

Chunxia Zhang, Yilei Wu, Mu Zhu

In the context of variable selection, ensemble learning has gained increasing interest due to its great potential to improve selection accuracy and to reduce false discovery rate. A novel ordering-based selective ensemble learning strategy is designed in this paper to obtain smaller but more accurate ensembles. In particular, a greedy sorting strategy is proposed to rearrange the order by which the members are included into the integration process. Through stopping the fusion process early, a smaller subensemble with higher selection accuracy can be obtained. More importantly, the sequential inclusion criterion reveals the fundamental strength-diversity trade-off among ensemble members. By taking stability selection (abbreviated as StabSel) as an example, some experiments are conducted with both simulated and real-world data to examine the performance of the novel algorithm. Experimental results demonstrate that pruned StabSel generally achieves higher selection accuracy and lower false discovery rates than StabSel and several other benchmark methods.