Jean Rabault

Qiulei Wang, Lei Yan, Gang Hu et al.

This study proposes a self-learning algorithm for closed-loop cylinder wake control targeting lower drag and lower lift fluctuations with the additional challenge of sparse sensor information, taking deep reinforcement learning as the starting point. DRL performance is significantly improved by lifting the sensor signals to dynamic features (DF), which predict future flow states. The resulting dynamic feature-based DRL (DF-DRL) automatically learns a feedback control in the plant without a dynamic model. Results show that the drag coefficient of the DF-DRL model is 25% less than the vanilla model based on direct sensor feedback. More importantly, using only one surface pressure sensor, DF-DRL can reduce the drag coefficient to a state-of-the-art performance of about 8% at Re = 100 and significantly mitigate lift coefficient fluctuations. Hence, DF-DRL allows the deployment of sparse sensing of the flow without degrading the control performance. This method also shows good robustness in controlling flow under higher Reynolds numbers, which reduces the drag coefficient by 32.2% and 46.55% at Re = 500 and 1000, respectively, indicating the broad applicability of the method. Since surface pressure information is more straightforward to measure in realistic scenarios than flow velocity information, this study provides a valuable reference for experimentally designing the active flow control of a circular cylinder based on wall pressure signals, which is an essential step toward further developing intelligent control in realistic multi-input multi-output (MIMO) system.

Colin Vignon, Jean Rabault, Joel Vasanth et al.

Rayleigh-Bénard convection (RBC) is a recurrent phenomenon in several industrial and geoscience flows and a well-studied system from a fundamental fluid-mechanics viewpoint. However, controlling RBC, for example by modulating the spatial distribution of the bottom-plate heating in the canonical RBC configuration, remains a challenging topic for classical control-theory methods. In the present work, we apply deep reinforcement learning (DRL) for controlling RBC. We show that effective RBC control can be obtained by leveraging invariant multi-agent reinforcement learning (MARL), which takes advantage of the locality and translational invariance inherent to RBC flows inside wide channels. The MARL framework applied to RBC allows for an increase in the number of control segments without encountering the curse of dimensionality that would result from a naive increase in the DRL action-size dimension. This is made possible by the MARL ability for re-using the knowledge generated in different parts of the RBC domain. We show in a case study that MARL DRL is able to discover an advanced control strategy that destabilizes the spontaneous RBC double-cell pattern, changes the topology of RBC by coalescing adjacent convection cells, and actively controls the resulting coalesced cell to bring it to a new stable configuration. This modified flow configuration results in reduced convective heat transfer, which is beneficial in several industrial processes. Therefore, our work both shows the potential of MARL DRL for controlling large RBC systems, as well as demonstrates the possibility for DRL to discover strategies that move the RBC configuration between different topological configurations, yielding desirable heat-transfer characteristics. These results are useful for both gaining further understanding of the intrinsic properties of RBC, as well as for developing industrial applications.

Joel Vasanth, Jean Rabault, Francisco Alcántara-Ávila et al.

Deep reinforcement learning (DRL) has found application in numerous use-cases pertaining to flow control. Multi-agent RL (MARL), a variant of DRL, has shown to be more effective than single-agent RL in controlling flows exhibiting locality and translational invariance. We present, for the first time, an implementation of MARL-based control of three-dimensional Rayleigh-Bénard convection (RBC). Control is executed by modifying the temperature distribution along the bottom wall divided into multiple control segments, each of which acts as an independent agent. Two regimes of RBC are considered at Rayleigh numbers $\mathrm{Ra}=500$ and $750$. Evaluation of the learned control policy reveals a reduction in convection intensity by $23.5\%$ and $8.7\%$ at $\mathrm{Ra}=500$ and $750$, respectively. The MARL controller converts irregularly shaped convective patterns to regular straight rolls with lower convection that resemble flow in a relatively more stable regime. We draw comparisons with proportional control at both $\mathrm{Ra}$ and show that MARL is able to outperform the proportional controller. The learned control strategy is complex, featuring different non-linear segment-wise actuator delays and actuation magnitudes. We also perform successful evaluations on a larger domain than used for training, demonstrating that the invariant property of MARL allows direct transfer of the learnt policy.

Joongoo Jeon, Jean Rabault, Joel Vasanth et al.

Flow control is key to maximize energy efficiency in a wide range of applications. However, traditional flow-control methods face significant challenges in addressing non-linear systems and high-dimensional data, limiting their application in realistic energy systems. This study advances deep-reinforcement-learning (DRL) methods for flow control, particularly focusing on integrating group-invariant networks and positional encoding into DRL architectures. Our methods leverage multi-agent reinforcement learning (MARL) to exploit policy invariance in space, in combination with group-invariant networks to ensure local symmetry invariance. Additionally, a positional encoding inspired by the transformer architecture is incorporated to provide location information to the agents, mitigating action constraints from strict invariance. The proposed methods are verified using a case study of Rayleigh-Bénard convection, where the goal is to minimize the Nusselt number Nu. The group-invariant neural networks (GI-NNs) show faster convergence compared to the base MARL, achieving better average policy performance. The GI-NNs not only cut DRL training time in half but also notably enhance learning reproducibility. Positional encoding further enhances these results, effectively reducing the minimum Nu and stabilizing convergence. Interestingly, group invariant networks specialize in improving learning speed and positional encoding specializes in improving learning quality. These results demonstrate that choosing a suitable feature-representation method according to the purpose as well as the characteristics of each control problem is essential. We believe that the results of this study will not only inspire novel DRL methods with invariant and unique representations, but also provide useful insights for industrial applications.

Federica Tonti, Jean Rabault, Ricardo Vinuesa

The increasing number of unmanned aerial vehicles (UAVs) in urban environments requires a strategy to minimize their environmental impact, both in terms of energy efficiency and noise reduction. In order to reduce these concerns, novel strategies for developing prediction models and optimization of flight planning, for instance through deep reinforcement learning (DRL), are needed. Our goal is to develop DRL algorithms capable of enabling the autonomous navigation of UAVs in urban environments, taking into account the presence of buildings and other UAVs, optimizing the trajectories in order to reduce both energetic consumption and noise. This is achieved using fluid-flow simulations which represent the environment in which UAVs navigate and training the UAV as an agent interacting with an urban environment. In this work, we consider a domain domain represented by a two-dimensional flow field with obstacles, ideally representing buildings, extracted from a three-dimensional high-fidelity numerical simulation. The presented methodology, using PPO+LSTM cells, was validated by reproducing a simple but fundamental problem in navigation, namely the Zermelo's problem, which deals with a vessel navigating in a turbulent flow, travelling from a starting point to a target location, optimizing the trajectory. The current method shows a significant improvement with respect to both a simple PPO and a TD3 algorithm, with a success rate (SR) of the PPO+LSTM trained policy of 98.7%, and a crash rate (CR) of 0.1%, outperforming both PPO (SR = 75.6%, CR=18.6%) and TD3 (SR=77.4% and CR=14.5%). This is the first step towards DRL strategies which will guide UAVs in a three-dimensional flow field using real-time signals, making the navigation efficient in terms of flight time and avoiding damages to the vehicle.

Kristian Holme, Jean Rabault, Ricardo Vinuesa et al.

Rotating detonation engines (RDEs) are a promising propulsion concept that may offer higher thermodynamic efficiency and specific impulse than conventional systems, but nonlinear phenomena, including transitions to oscillatory or chaotic propagation modes, can hinder practical operation. Deep Reinforcement Learning (DRL) has emerged as a promising method for controlling complex nonlinear dynamics such as those observed in RDEs. However, the multi-timescale nature of the RDE system makes direct application of DRL challenging. We address this challenge by reformulating the DRL problem in a moving reference frame that follows the detonation-wave pattern, making the wave structure appear quasi-steady to the agent. This reformulation enables scale separation between fast detonation propagation and slower operating-mode dynamics. We train DRL controllers to modulate spatially segmented injection pressure in a one-dimensional reduced-order RDE model and induce rapid transitions between different mode-locked states. Across a range of actuation periods, initial states, and target modes, controllers trained in the moving frame learn more reliably than those trained in a stationary frame and remain effective over a broader range of actuation periods. These results suggest that symmetry-aware moving reference frame formulations may be useful for related multiscale flow-control problems and that scale separation should be exploited whenever possible to enable DRL control of multi-timescale systems.

Hans Harder, Jean Rabault, Ricardo Vinuesa et al.

We utilize extreme-learning machines for the prediction of partial differential equations (PDEs). Our method splits the state space into multiple windows that are predicted individually using a single model. Despite requiring only few data points (in some cases, our method can learn from a single full-state snapshot), it still achieves high accuracy and can predict the flow of PDEs over long time horizons. Moreover, we show how additional symmetries can be exploited to increase sample efficiency and to enforce equivariance.

Ricard Montalà, Bernat Font, Pol Suárez et al.

This paper presents a deep reinforcement learning (DRL) framework for active flow control (AFC) to reduce drag in aerodynamic bodies. Tested on a 3D cylinder at Re = 100, the DRL approach achieved a 9.32% drag reduction and a 78.4% decrease in lift oscillations by learning advanced actuation strategies. The methodology integrates a CFD solver with a DRL model using an in-memory database for efficient communication between

Ricardo Vinuesa, Paola Cinnella, Jean Rabault et al. · uw

As modern scientific instruments generate vast amounts of data and the volume of information in the scientific literature continues to grow, machine learning (ML) has become an essential tool for organising, analysing, and interpreting these complex datasets. This paper explores the transformative role of ML in accelerating breakthroughs across a range of scientific disciplines. By presenting key examples -- such as brain mapping and exoplanet detection -- we demonstrate how ML is reshaping scientific research. We also explore different scenarios where different levels of knowledge of the underlying phenomenon are available, identifying strategies to overcome limitations and unlock the full potential of ML. Despite its advances, the growing reliance on ML poses challenges for research applications and rigorous validation of discoveries. We argue that even with these challenges, ML is poised to disrupt traditional methodologies and advance the boundaries of knowledge by enabling researchers to tackle increasingly complex problems. Thus, the scientific community can move beyond the necessary traditional oversimplifications to embrace the full complexity of natural systems, ultimately paving the way for interdisciplinary breakthroughs and innovative solutions to humanity's most pressing challenges.

Pol Suárez, Francisco Alcántara-Ávila, Arnau Miró et al.

This paper presents for the first time successful results of active flow control with multiple independently controlled zero-net-mass-flux synthetic jets. The jets are placed on a three-dimensional cylinder along its span with the aim of reducing the drag coefficient. The method is based on a deep-reinforcement-learning framework that couples a computational-fluid-dynamics solver with an agent using the proximal-policy-optimization algorithm. We implement a multi-agent reinforcement-learning framework which offers numerous advantages: it exploits local invariants, makes the control adaptable to different geometries, facilitates transfer learning and cross-application of agents and results in significant training speedup. In this contribution we report significant drag reduction after applying the DRL-based control in three different configurations of the problem.

Fabio Pino, Lorenzo Schena, Jean Rabault et al.

Machine learning frameworks such as Genetic Programming (GP) and Reinforcement Learning (RL) are gaining popularity in flow control. This work presents a comparative analysis of the two, bench-marking some of their most representative algorithms against global optimization techniques such as Bayesian Optimization (BO) and Lipschitz global optimization (LIPO). First, we review the general framework of the model-free control problem, bringing together all methods as black-box optimization problems. Then, we test the control algorithms on three test cases. These are (1) the stabilization of a nonlinear dynamical system featuring frequency cross-talk, (2) the wave cancellation from a Burgers' flow and (3) the drag reduction in a cylinder wake flow. We present a comprehensive comparison to illustrate their differences in exploration versus exploitation and their balance between `model capacity' in the control law definition versus `required complexity'. We believe that such a comparison paves the way toward the hybridization of the various methods, and we offer some perspective on their future development in the literature on flow control problems.

Paul Garnier, Jonathan Viquerat, Jean Rabault et al.

Deep reinforcement learning (DRL) has recently been adopted in a wide range of physics and engineering domains for its ability to solve decision-making problems that were previously out of reach due to a combination of non-linearity and high dimensionality. In the last few years, it has spread in the field of computational mechanics, and particularly in fluid dynamics, with recent applications in flow control and shape optimization. In this work, we conduct a detailed review of existing DRL applications to fluid mechanics problems. In addition, we present recent results that further illustrate the potential of DRL in Fluid Mechanics. The coupling methods used in each case are covered, detailing their advantages and limitations. Our review also focuses on the comparison with classical methods for optimal control and optimization. Finally, several test cases are described that illustrate recent progress made in this field. The goal of this publication is to provide an understanding of DRL capabilities along with state-of-the-art applications in fluid dynamics to researchers wishing to address new problems with these methods.