Ehsan Hashemi

Minghao Ning, Yufeng Yang, Keqi Shu et al.

Vehicle-infrastructure (V2I) cooperative perception can substantially extend the range, coverage, and robustness of autonomous driving systems beyond the limits of onboard-only sensing, particularly in occluded and adverse-weather environments. However, its practical value is still difficult to quantify because existing benchmarks do not adequately capture large-scale multi-node deployments, realistic communication conditions, and adverse-weather operation. This paper presents CoInfra, a deployable cooperative infrastructure perception platform comprising 14 roadside sensor nodes connected through a commercial 5G network, together with a large-scale dataset and an open-source system stack for V2I cooperation research. The system supports synchronized multi-node sensing and delay-aware fusion under real 5G communication constraints. The released dataset covers an eight-node urban roundabout under four weather conditions (sunny, rainy, heavy snow, and freezing rain) and contains 294k LiDAR frames, 589k camera images, and 332k globally consistent 3D bounding boxes. It also includes a synchronized V2I subset collected with an autonomous vehicle. Beyond standard perception benchmarks, we further evaluate whether infrastructure sensing improves awareness of safety-critical traffic participants during roundabout interactions. In structured conflict scenarios, V2I cooperation increases critical-frame completeness from 33%-46% with vehicle-only sensing to 86%-100%. These results show that multi-node infrastructure perception can significantly improve situational awareness in conflict-rich traffic scenarios where vehicle-only sensing is most limited.

Yufeng Yang, Minghao Ning, Keqi Shu et al.

Autonomous mobility systems increasingly operate in dense and dynamic environments where perception occlusions, limited sensing coverage, and multi-agent interactions pose major challenges. While onboard sensors provide essential local perception, they often struggle to maintain reliable situational awareness in crowded urban or indoor settings. This article presents the Cloud-based Autonomous Mobility (CAM) framework, a generalized architecture that integrates infrastructure-based intelligent sensing with cloud-level coordination to enhance autonomous operations. The system deploys distributed Intelligent Sensor Nodes (ISNs) equipped with cameras, LiDAR, and edge computing to perform multi-modal perception and transmit structured information to a cloud platform via high-speed wireless communication. The cloud aggregates observations from multiple nodes to generate a global scene representation for other autonomous modules, such as decision making, motion planning, etc. Real-world deployments in an urban roundabout and a hospital-like indoor environment demonstrate improved perception robustness, safety, and coordination for future intelligent mobility systems.

Minghao Ning, Yaodong Cui, Yufeng Yang et al.

This paper presents a novel real-time, delay-aware cooperative perception system designed for intelligent mobility platforms operating in dynamic indoor environments. The system contains a network of multi-modal sensor nodes and a central node that collectively provide perception services to mobility platforms. The proposed Hierarchical Clustering Considering the Scanning Pattern and Ground Contacting Feature based Lidar Camera Fusion improve intra-node perception for crowded environment. The system also features delay-aware global perception to synchronize and aggregate data across nodes. To validate our approach, we introduced the Indoor Pedestrian Tracking dataset, compiled from data captured by two indoor sensor nodes. Our experiments, compared to baselines, demonstrate significant improvements in detection accuracy and robustness against delays. The dataset is available in the repository: https://github.com/NingMingHao/MVSLab-IndoorCooperativePerception

Minghao Ning, Ahmad Reza Alghooneh, Chen Sun et al.

In this paper, we propose an accurate and robust perception module for Autonomous Vehicles (AVs) for drivable space extraction. Perception is crucial in autonomous driving, where many deep learning-based methods, while accurate on benchmark datasets, fail to generalize effectively, especially in diverse and unpredictable environments. Our work introduces a robust easy-to-generalize perception module that leverages LiDAR, camera, and HD map data fusion to deliver a safe and reliable drivable space in all weather conditions. We present an adaptive ground removal and curb detection method integrated with HD map data for enhanced obstacle detection reliability. Additionally, we propose an adaptive DBSCAN clustering algorithm optimized for precipitation noise, and a cost-effective LiDAR-camera frustum association that is resilient to calibration discrepancies. Our comprehensive drivable space representation incorporates all perception data, ensuring compatibility with vehicle dimensions and road regulations. This approach not only improves generalization and efficiency, but also significantly enhances safety in autonomous vehicle operations. Our approach is tested on a real dataset and its reliability is verified during the daily (including harsh snowy weather) operation of our autonomous shuttle, WATonoBus

Xingkang He, Ehsan Hashemi, Karl H. Johansson

This paper proposes a method to navigate a mobile robot by estimating its state over a number of distributed sensor networks (DSNs) such that it can successively accomplish a sequence of tasks, i.e., its state enters each targeted set and stays inside no less than the desired time, under a resource-aware, time-efficient, and computation- and communication-constrained setting.We propose a new robot state estimation and navigation architecture, which integrates an event-triggered task-switching feedback controller for the robot and a two-time-scale distributed state estimator for each sensor. The architecture has three major advantages over existing approaches: First, in each task only one DSN is active for sensing and estimating the robot state, and for different tasks the robot can switch the active DSN by taking resource saving and system performance into account; Second, the robot only needs to communicate with one active sensor at each time to obtain its state information from the active DSN; Third, no online optimization is required. With the controller, the robot is able to accomplish a task by following a reference trajectory and switch to the next task when an event-triggered condition is fulfilled. With the estimator, each active sensor is able to estimate the robot state. Under proper conditions, we prove that the state estimation error and the trajectory tracking deviation are upper bounded by two time-varying sequences respectively, which play an essential role in the event-triggered condition. Furthermore, we find a sufficient condition for accomplishing a task and provide an upper bound of running time for the task. Numerical simulations of an indoor robot's localization and navigation are provided to validate the proposed architecture.

Bruno H. Groenner Barbosa, Neel P. Bhatt, Amir Khajepour et al.

This paper presents a generic feature-based navigation framework for autonomous vehicles using a soft constrained Particle Filter. Selected map features, such as road and landmark locations, and vehicle states are used for designing soft constraints. After obtaining features of mapped landmarks in instance-based segmented images acquired from a monocular camera, vehicle-to-landmark distances are predicted using Gaussian Process Regression (GPR) models in a mixture of experts approach. Both mean and variance outputs of GPR models are used for implementing adaptive constraints. Experimental results confirm that the use of image segmentation features improves the vehicle-to-landmark distance prediction notably, and that the proposed soft constrained approach reliably localizes the vehicle even with reduced number of landmarks and noisy observations.