Vu Nguyen

Yixin Liu, Thalaiyasingam Ajanthan, Hisham Husain et al.

The ubiquity of missing data has sparked considerable attention and focus on tabular data imputation methods. Diffusion models, recognized as the cutting-edge technique for data generation, demonstrate significant potential in tabular data imputation tasks. However, in pursuit of diversity, vanilla diffusion models often exhibit sensitivity to initialized noises, which hinders the models from generating stable and accurate imputation results. Additionally, the sparsity inherent in tabular data poses challenges for diffusion models in accurately modeling the data manifold, impacting the robustness of these models for data imputation. To tackle these challenges, this paper introduces an advanced diffusion model named Self-supervised imputation Diffusion Model (SimpDM for brevity), specifically tailored for tabular data imputation tasks. To mitigate sensitivity to noise, we introduce a self-supervised alignment mechanism that aims to regularize the model, ensuring consistent and stable imputation predictions. Furthermore, we introduce a carefully devised state-dependent data augmentation strategy within SimpDM, enhancing the robustness of the diffusion model when dealing with limited data. Extensive experiments demonstrate that SimpDM matches or outperforms state-of-the-art imputation methods across various scenarios.

Samuel Kessler, Tam Le, Vu Nguyen

Selecting data for training machine learning models is crucial since large, web-scraped, real datasets contain noisy artifacts that affect the quality and relevance of individual data points. These noisy artifacts will impact model performance. We formulate this problem as a data valuation task, assigning a value to data points in the training set according to how similar or dissimilar they are to a clean and curated validation set. Recently, LAVA demonstrated the use of optimal transport (OT) between a large noisy training dataset and a clean validation set, to value training data efficiently, without the dependency on model performance. However, the LAVA algorithm requires the entire dataset as an input, this limits its application to larger datasets. Inspired by the scalability of stochastic (gradient) approaches which carry out computations on batches of data points instead of the entire dataset, we analogously propose SAVA, a scalable variant of LAVA with its computation on batches of data points. Intuitively, SAVA follows the same scheme as LAVA which leverages the hierarchically defined OT for data valuation. However, while LAVA processes the whole dataset, SAVA divides the dataset into batches of data points, and carries out the OT problem computation on those batches. Moreover, our theoretical derivations on the trade-off of using entropic regularization for OT problems include refinements of prior work. We perform extensive experiments, to demonstrate that SAVA can scale to large datasets with millions of data points and does not trade off data valuation performance.

Jack Parker-Holder, Raghu Rajan, Xingyou Song et al.

The combination of Reinforcement Learning (RL) with deep learning has led to a series of impressive feats, with many believing (deep) RL provides a path towards generally capable agents. However, the success of RL agents is often highly sensitive to design choices in the training process, which may require tedious and error-prone manual tuning. This makes it challenging to use RL for new problems, while also limits its full potential. In many other areas of machine learning, AutoML has shown it is possible to automate such design choices and has also yielded promising initial results when applied to RL. However, Automated Reinforcement Learning (AutoRL) involves not only standard applications of AutoML but also includes additional challenges unique to RL, that naturally produce a different set of methods. As such, AutoRL has been emerging as an important area of research in RL, providing promise in a variety of applications from RNA design to playing games such as Go. Given the diversity of methods and environments considered in RL, much of the research has been conducted in distinct subfields, ranging from meta-learning to evolution. In this survey we seek to unify the field of AutoRL, we provide a common taxonomy, discuss each area in detail and pose open problems which would be of interest to researchers going forward.

Vu Nguyen, Marc Peter Deisenroth, Michael A. Osborne

Many functions have approximately-known upper and/or lower bounds, potentially aiding the modeling of such functions. In this paper, we introduce Gaussian process models for functions where such bounds are (approximately) known. More specifically, we propose the first use of such bounds to improve Gaussian process (GP) posterior sampling and Bayesian optimization (BO). That is, we transform a GP model satisfying the given bounds, and then sample and weight functions from its posterior. To further exploit these bounds in BO settings, we present bounded entropy search (BES) to select the point gaining the most information about the underlying function, estimated by the GP samples, while satisfying the output constraints. We characterize the sample variance bounds and show that the decision made by BES is explainable. Our proposed approach is conceptually straightforward and can be used as a plug in extension to existing methods for GP posterior sampling and Bayesian optimization.

Maximilian Ahrens, Julian Ashwin, Jan-Peter Calliess et al.

Causal inference using observational text data is becoming increasingly popular in many research areas. This paper presents the Bayesian Topic Regression (BTR) model that uses both text and numerical information to model an outcome variable. It allows estimation of both discrete and continuous treatment effects. Furthermore, it allows for the inclusion of additional numerical confounding factors next to text data. To this end, we combine a supervised Bayesian topic model with a Bayesian regression framework and perform supervised representation learning for the text features jointly with the regression parameter training, respecting the Frisch-Waugh-Lovell theorem. Our paper makes two main contributions. First, we provide a regression framework that allows causal inference in settings when both text and numerical confounders are of relevance. We show with synthetic and semi-synthetic datasets that our joint approach recovers ground truth with lower bias than any benchmark model, when text and numerical features are correlated. Second, experiments on two real-world datasets demonstrate that a joint and supervised learning strategy also yields superior prediction results compared to strategies that estimate regression weights for text and non-text features separately, being even competitive with more complex deep neural networks.

Vu Nguyen, Vaden Masrani, Rob Brekelmans et al.

Achieving the full promise of the Thermodynamic Variational Objective (TVO), a recently proposed variational lower bound on the log evidence involving a one-dimensional Riemann integral approximation, requires choosing a "schedule" of sorted discretization points. This paper introduces a bespoke Gaussian process bandit optimization method for automatically choosing these points. Our approach not only automates their one-time selection, but also dynamically adapts their positions over the course of optimization, leading to improved model learning and inference. We provide theoretical guarantees that our bandit optimization converges to the regret-minimizing choice of integration points. Empirical validation of our algorithm is provided in terms of improved learning and inference in Variational Autoencoders and Sigmoid Belief Networks.

Vu Nguyen, Tam Le, Makoto Yamada et al.

Neural architecture search (NAS) automates the design of deep neural networks. One of the main challenges in searching complex and non-continuous architectures is to compare the similarity of networks that the conventional Euclidean metric may fail to capture. Optimal transport (OT) is resilient to such complex structure by considering the minimal cost for transporting a network into another. However, the OT is generally not negative definite which may limit its ability to build the positive-definite kernels required in many kernel-dependent frameworks. Building upon tree-Wasserstein (TW), which is a negative definite variant of OT, we develop a novel discrepancy for neural architectures, and demonstrate it within a Gaussian process surrogate model for the sequential NAS settings. Furthermore, we derive a novel parallel NAS, using quality k-determinantal point process on the GP posterior, to select diverse and high-performing architectures from a discrete set of candidates. Empirically, we demonstrate that our TW-based approaches outperform other baselines in both sequential and parallel NAS.

Cheng Li, Sunil Gupta, Santu Rana et al.

Scientific experiments are usually expensive due to complex experimental preparation and processing. Experimental design is therefore involved with the task of finding the optimal experimental input that results in the desirable output by using as few experiments as possible. Experimenters can often acquire the knowledge about the location of the global optimum. However, they do not know how to exploit this knowledge to accelerate experimental design. In this paper, we adopt the technique of Bayesian optimization for experimental design since Bayesian optimization has established itself as an efficient tool for optimizing expensive black-box functions. Again, it is unknown how to incorporate the expert prior knowledge about the global optimum into Bayesian optimization process. To address it, we represent the expert knowledge about the global optimum via placing a prior distribution on it and we then derive its posterior distribution. An efficient Bayesian optimization approach has been proposed via posterior sampling on the posterior distribution of the global optimum. We theoretically analyze the convergence of the proposed algorithm and discuss the robustness of incorporating expert prior. We evaluate the efficiency of our algorithm by optimizing synthetic functions and tuning hyperparameters of classifiers along with a real-world experiment on the synthesis of short polymer fiber. The results clearly demonstrate the advantages of our proposed method.

N. M. van Esbroeck, D. T. Lennon, H. Moon et al.

Quantum devices with a large number of gate electrodes allow for precise control of device parameters. This capability is hard to fully exploit due to the complex dependence of these parameters on applied gate voltages. We experimentally demonstrate an algorithm capable of fine-tuning several device parameters at once. The algorithm acquires a measurement and assigns it a score using a variational auto-encoder. Gate voltage settings are set to optimise this score in real-time in an unsupervised fashion. We report fine-tuning times of a double quantum dot device within approximately 40 min.

Samuel Kessler, Vu Nguyen, Stefan Zohren et al.

We place an Indian Buffet process (IBP) prior over the structure of a Bayesian Neural Network (BNN), thus allowing the complexity of the BNN to increase and decrease automatically. We further extend this model such that the prior on the structure of each hidden layer is shared globally across all layers, using a Hierarchical-IBP (H-IBP). We apply this model to the problem of resource allocation in Continual Learning (CL) where new tasks occur and the network requires extra resources. Our model uses online variational inference with reparameterisation of the Bernoulli and Beta distributions, which constitute the IBP and H-IBP priors. As we automatically learn the number of weights in each layer of the BNN, overfitting and underfitting problems are largely overcome. We show empirically that our approach offers a competitive edge over existing methods in CL.

Cheng Li, Santu Rana, Sunil Gupta et al.

Experimental design is a process of obtaining a product with target property via experimentation. Bayesian optimization offers a sample-efficient tool for experimental design when experiments are expensive. Often, expert experimenters have 'hunches' about the behavior of the experimental system, offering potentials to further improve the efficiency. In this paper, we consider per-variable monotonic trend in the underlying property that results in a unimodal trend in those variables for a target value optimization. For example, sweetness of a candy is monotonic to the sugar content. However, to obtain a target sweetness, the utility of the sugar content becomes a unimodal function, which peaks at the value giving the target sweetness and falls off both ways. In this paper, we propose a novel method to solve such problems that achieves two main objectives: a) the monotonicity information is used to the fullest extent possible, whilst ensuring that b) the convergence guarantee remains intact. This is achieved by a two-stage Gaussian process modeling, where the first stage uses the monotonicity trend to model the underlying property, and the second stage uses `virtual' samples, sampled from the first, to model the target value optimization function. The process is made theoretically consistent by adding appropriate adjustment factor in the posterior computation, necessitated because of using the `virtual' samples. The proposed method is evaluated through both simulations and real world experimental design problems of a) new short polymer fiber with the target length, and b) designing of a new three dimensional porous scaffolding with a target porosity. In all scenarios our method demonstrates faster convergence than the basic Bayesian optimization approach not using such `hunches'.

Cheng Li, Sunil Gupta, Santu Rana et al.

Scaling Bayesian optimization to high dimensions is challenging task as the global optimization of high-dimensional acquisition function can be expensive and often infeasible. Existing methods depend either on limited active variables or the additive form of the objective function. We propose a new method for high-dimensional Bayesian optimization, that uses a dropout strategy to optimize only a subset of variables at each iteration. We derive theoretical bounds for the regret and show how it can inform the derivation of our algorithm. We demonstrate the efficacy of our algorithms for optimization on two benchmark functions and two real-world applications- training cascade classifiers and optimizing alloy composition.

Vu Nguyen, Santu Rana, Sunil Gupta et al.

Parameter settings profoundly impact the performance of machine learning algorithms and laboratory experiments. The classical grid search or trial-error methods are exponentially expensive in large parameter spaces, and Bayesian optimization (BO) offers an elegant alternative for global optimization of black box functions. In situations where the black box function can be evaluated at multiple points simultaneously, batch Bayesian optimization is used. Current batch BO approaches are restrictive in that they fix the number of evaluations per batch, and this can be wasteful when the number of specified evaluations is larger than the number of real maxima in the underlying acquisition function. We present the Budgeted Batch Bayesian Optimization (B3O) for hyper-parameter tuning and experimental design - we identify the appropriate batch size for each iteration in an elegant way. To set the batch size flexible, we use the infinite Gaussian mixture model (IGMM) for automatically identifying the number of peaks in the underlying acquisition functions. We solve the intractability of estimating the IGMM directly from the acquisition function by formulating the batch generalized slice sampling to efficiently draw samples from the acquisition function. We perform extensive experiments for both synthetic functions and two real world applications - machine learning hyper-parameter tuning and experimental design for alloy hardening. We show empirically that the proposed B3O outperforms the existing fixed batch BO approaches in finding the optimum whilst requiring a fewer number of evaluations, thus saving cost and time.

Trung Le, Khanh Nguyen, Van Nguyen et al.

Acquiring labels are often costly, whereas unlabeled data are usually easy to obtain in modern machine learning applications. Semi-supervised learning provides a principled machine learning framework to address such situations, and has been applied successfully in many real-word applications and industries. Nonetheless, most of existing semi-supervised learning methods encounter two serious limitations when applied to modern and large-scale datasets: computational burden and memory usage demand. To this end, we present in this paper the Graph-based semi-supervised Kernel Machine (GKM), a method that leverages the generalization ability of kernel-based method with the geometrical and distributive information formulated through a spectral graph induced from data for semi-supervised learning purpose. Our proposed GKM can be solved directly in the primal form using the Stochastic Gradient Descent method with the ideal convergence rate $O(\frac{1}{T})$. Besides, our formulation is suitable for a wide spectrum of important loss functions in the literature of machine learning (e.g., Hinge, smooth Hinge, Logistic, L1, and ε-insensitive) and smoothness functions (i.e., $l_p(t) = |t|^p$ with $p\ge1$). We further show that the well-known Laplacian Support Vector Machine is a special case of our formulation. We validate our proposed method on several benchmark datasets to demonstrate that GKM is appropriate for the large-scale datasets since it is optimal in memory usage and yields superior classification accuracy whilst simultaneously achieving a significant computation speed-up in comparison with the state-of-the-art baselines.

Trung Le, Tu Dinh Nguyen, Vu Nguyen et al.

One of the most challenging problems in kernel online learning is to bound the model size and to promote the model sparsity. Sparse models not only improve computation and memory usage, but also enhance the generalization capacity, a principle that concurs with the law of parsimony. However, inappropriate sparsity modeling may also significantly degrade the performance. In this paper, we propose Approximation Vector Machine (AVM), a model that can simultaneously encourage the sparsity and safeguard its risk in compromising the performance. When an incoming instance arrives, we approximate this instance by one of its neighbors whose distance to it is less than a predefined threshold. Our key intuition is that since the newly seen instance is expressed by its nearby neighbor the optimal performance can be analytically formulated and maintained. We develop theoretical foundations to support this intuition and further establish an analysis to characterize the gap between the approximation and optimal solutions. This gap crucially depends on the frequency of approximation and the predefined threshold. We perform the convergence analysis for a wide spectrum of loss functions including Hinge, smooth Hinge, and Logistic for classification task, and $l_1$, $l_2$, and $ε$-insensitive for regression task. We conducted extensive experiments for classification task in batch and online modes, and regression task in online mode over several benchmark datasets. The results show that our proposed AVM achieved a comparable predictive performance with current state-of-the-art methods while simultaneously achieving significant computational speed-up due to the ability of the proposed AVM in maintaining the model size.

Vu Nguyen, Dinh Phung, XuanLong Nguyen et al.

We present a Bayesian nonparametric framework for multilevel clustering which utilizes group-level context information to simultaneously discover low-dimensional structures of the group contents and partitions groups into clusters. Using the Dirichlet process as the building block, our model constructs a product base-measure with a nested structure to accommodate content and context observations at multiple levels. The proposed model possesses properties that link the nested Dirichlet processes (nDP) and the Dirichlet process mixture models (DPM) in an interesting way: integrating out all contents results in the DPM over contexts, whereas integrating out group-specific contexts results in the nDP mixture over content variables. We provide a Polya-urn view of the model and an efficient collapsed Gibbs inference procedure. Extensive experiments on real-world datasets demonstrate the advantage of utilizing context information via our model in both text and image domains.