Sunwoong Yang

Yu-Eop Kang, Sunwoong Yang, Kwanjung Yee

Autoencoder-based reduced-order modeling (ROM) has recently attracted significant attention, owing to its ability to capture underlying nonlinear features. However, two critical drawbacks severely undermine its scalability to various physical applications: entangled and therefore uninterpretable latent variables (LVs) and the blindfold determination of latent space dimension. In this regard, this study proposes the physics-aware ROM using only interpretable and information-intensive LVs extracted by $β$-variational autoencoder, which are referred to as physics-aware LVs throughout this paper. To extract these LVs, their independence and information intensity are quantitatively scrutinized in a two-dimensional transonic flow benchmark problem. Then, the physical meanings of the physics-aware LVs are thoroughly investigated and we confirmed that with appropriate hyperparameter $β$, they actually correspond to the generating factors of the training dataset, Mach number and angle of attack. To the best of the authors' knowledge, our work is the first to practically confirm that $β$-variational autoencoder can automatically extract the physical generating factors in the field of applied physics. Finally, physics-aware ROM, which utilizes only physics-aware LVs, is compared with conventional ROMs, and its validity and efficiency are successfully verified.

Sunwoong Yang, Hojin Kim, Yoonpyo Hong et al.

This study explores the potential of physics-informed neural networks (PINNs) for the realization of digital twins (DT) from various perspectives. First, various adaptive sampling approaches for collocation points are investigated to verify their effectiveness in the mesh-free framework of PINNs, which allows automated construction of virtual representation without manual mesh generation. Then, the overall performance of the data-driven PINNs (DD-PINNs) framework is examined, which can utilize the acquired datasets in DT scenarios. Its scalability to more general physics is validated within parametric Navier-Stokes equations, where PINNs do not need to be retrained as the Reynolds number varies. In addition, since datasets can be often collected from different fidelity/sparsity in practice, multi-fidelity DD-PINNs are also proposed and evaluated. They show remarkable prediction performance even in the extrapolation tasks, with $42\sim62\%$ improvement over the single-fidelity approach. Finally, the uncertainty quantification performance of multi-fidelity DD-PINNs is investigated by the ensemble method to verify their potential in DT, where an accurate measure of predictive uncertainty is critical. The DD-PINN frameworks explored in this study are found to be more suitable for DT scenarios than traditional PINNs from the above perspectives, bringing engineers one step closer to seamless DT realization.

Dongeon Lee, Leekyo Jeong, Soyoung Yoo et al.

Recent advances in large language models (LLMs) have demonstrated significant potential in supporting engineering design tasks, including computer-aided design (CAD) automation. However, most existing LLM-based 3D CAD generation approaches primarily focus on geometric precision and instruction-following performance, often overlooking the fundamental aspect of creative design exploration. This study presents a TRIZ-inspired text-to-CAD framework that leverages LLMs to generate high-quality, editable CAD models while systematically exploring creative design alternatives. The framework integrates the Theory of Inventive Problem Solving (TRIZ)-embedding deep human insights from extensive patent records-into LLM prompting strategies, enabling autonomous generation of innovative CAD variants that address technical contradictions. Through a comprehensive three-stage pipeline of design generation, enhancement, and optimization, the framework produces structurally diverse CAD models from well-crafted prompts. The present study implements and evaluates the first two stages, while positioning the design optimization stage as future work. A product design case study (chair) demonstrates that the TRIZ-inspired text-to-CAD framework generates multiple creative design alternatives by systematically applying TRIZ inventive principles such as segmentation, anti-weight, dynamics, and composite materials, achieving 4.0-14.7% mass reduction across all enhanced designs while maintaining structural integrity. The key findings suggest that integrating systematic innovation methodologies with LLM-based 3D CAD generation bridges the gap between precision-focused synthesis and creativity-focused exploration, advancing toward autonomous design systems where AI makes design decisions independently, supporting human decision-making in human-AI collaborative design for engineering applications.

Sunwoong Yang, Youngkyu Lee, Namwoo Kang

This study presents an enhanced multi-fidelity Deep Operator Network (DeepONet) framework for efficient spatio-temporal flow field prediction when high-fidelity data is scarce. Key innovations include: a merge network replacing traditional dot-product operations, achieving 50.4% reduction in prediction error and 7.57% accuracy improvement while reducing training time by 96%; a transfer learning multi-fidelity approach that freezes pre-trained low-fidelity networks while making only the merge network trainable, outperforming alternatives by up to 76% and achieving 43.7% better accuracy than single-fidelity training; and a physics-guided subsampling method that strategically selects high-fidelity training points based on temporal dynamics, reducing high-fidelity sample requirements by 40% while maintaining comparable accuracy. Comprehensive experiments across multiple resolutions and datasets demonstrate the framework's ability to significantly reduce required high-fidelity dataset size while maintaining predictive accuracy, with consistent superior performance against conventional benchmarks.

Dongeon Lee, Sunwoong Yang, Jae-Won Oh et al.

Environmental pollution and fossil fuel depletion have prompted the need for renewable energy-based power generation. However, its stability is often challenged by low energy density and non-stationary conditions. Wave energy converters (WECs), in particular, need reliable real-time wave height prediction to address these issues caused by irregular wave patterns, which can lead to the inefficient and unstable operation of WECs. In this study, we propose an AI-powered reliable real-time wave height prediction model that integrates long short-term memory (LSTM) networks for temporal prediction with deep ensemble (DE) for robust uncertainty quantification (UQ), ensuring high accuracy and reliability. To further enhance the reliability, uncertainty calibration is applied, which has proven to significantly improve the quality of the quantified uncertainty. Using real operational data from an oscillating water column-wave energy converter (OWC-WEC) system in Jeju, South Korea, the model achieves notable accuracy (R2 > 0.9), while increasing uncertainty quality by over 50% through simple calibration technique. Furthermore, a comprehensive parametric study is conducted to explore the effects of key model hyperparameters, offering valuable guidelines for diverse operational scenarios, characterized by differences in wavelength, amplitude, and period. These results demonstrate the model's capability to deliver reliable predictions, facilitating digital twin of the ocean.

Sunwoong Yang, Sanga Lee, Kwanjung Yee

The inverse approach is computationally efficient in aerodynamic design as the desired target performance distribution is prespecified. However, it has some significant limitations that prevent it from achieving full efficiency. First, the iterative procedure should be repeated whenever the specified target distribution changes. Target distribution optimization can be performed to clarify the ambiguity in specifying this distribution, but several additional problems arise in this process such as loss of the representation capacity due to parameterization of the distribution, excessive constraints for a realistic distribution, inaccuracy of quantities of interest due to theoretical/empirical predictions, and the impossibility of explicitly imposing geometric constraints. To deal with these issues, a novel inverse design optimization framework with a two-step deep learning approach is proposed. A variational autoencoder and multi-layer perceptron are used to generate a realistic target distribution and predict the quantities of interest and shape parameters from the generated distribution, respectively. Then, target distribution optimization is performed as the inverse design optimization. The proposed framework applies active learning and transfer learning techniques to improve accuracy and efficiency. Finally, the framework is validated through aerodynamic shape optimizations of the wind turbine airfoil. Their results show that this framework is accurate, efficient, and flexible to be applied to other inverse design engineering applications.