Qingwen Xu

Xiaoling Long, Qingwen Xu, Yijun Yuan et al.

This paper improves visual-inertial systems to boost the localization accuracy for low-cost rescue robots. When robots traverse on rugged terrain, the performance of pose estimation suffers from big noise on the measurements of the inertial sensors due to ground contact forces, especially for low-cost sensors. Therefore, we propose \textit{Threshold}-based and \textit{Dynamic Time Warping}-based methods to detect abnormal measurements and mitigate such faults. The two methods are embedded into the popular VINS-Mono system to evaluate their performance. Experiments are performed on simulation and real robot data, which show that both methods increase the pose estimation accuracy. Moreover, the \textit{Threshold}-based method performs better when the noise is small and the \textit{Dynamic Time Warping}-based one shows greater potential on large noise.

Xiangyang Zhi, Qingwen Xu, Sören Schwertfeger

Small mobile robots are an important class of Search and Rescue Robots. Integrating all required components into such small robots is a difficult engineering task. Smartphones have already been made small, lightweight and cheap by the industry and are thus an excellent candidate as main controller for such robots. In this paper we outline how ROS can be used on Android devices and then evaluate one sensor which is very important for mobile robots: the Inertial Measurement Unit (IMU). Experiments are performed under static and dynamic conditions to measure the error of the IMUs of three smartphones and three professional IMUs. In the experiments we make use of a tracking system and an autonomous mobile robot.

Haofei Kuang, Qingwen Xu, Xiaoling Long et al.

We propose a novel pose estimation method for geometric vision of omni-directional cameras. On the basis of the regularity of the pixel movement after camera pose changes, we formulate and prove the sinusoidal relationship between pixels movement and camera motion. We use the improved Fourier-Mellin invariant (iFMI) algorithm to find the motion of pixels, which was shown to be more accurate and robust than the feature-based methods. While iFMI works only on pin-hole model images and estimates 4 parameters (x, y, yaw, scaling), our method works on panoramic images and estimates the full 6 DoF 3D transform, up to an unknown scale factor. For that we fit the motion of the pixels in the panoramic images, as determined by iFMI, to two sinusoidal functions. The offsets, amplitudes and phase-shifts of the two functions then represent the 3D rotation and translation of the camera between the two images. We perform experiments for 3D rotation, which show that our algorithm outperforms the feature-based methods in accuracy and robustness. We leave the more complex 3D translation experiments for future work.

Yijun Yuan, Qingwen Xu, Sören Schwertfeger

Flippers are essential components of tracked robot locomotion systems for unstructured terrain, especially within a rescue scenario. Achieving full and semi-autonomy for such rescue robots is the goal of many research efforts. In this work, we propose an algorithm to plan the morphologies of a small rescue robot with four flippers over 3D ground without any extra sensor, such as pressure sensor. To achieve the goal, we simplify the rescue robot as a skeleton on inflated terrain. Its morphology can be represented by configurations of several parameters. Then we plan the mobile movement on 3D terrain with four individually manipulated flippers. We perform real robot experiments on three different obstacles. The results show that we move the flippers very effectively and are thus able to tackle those terrains very well.

Arturo Gomez Chavez, Qingwen Xu, Christian A. Mueller et al.

Underwater robot interventions require a high level of safety and reliability. A major challenge to address is a robust and accurate acquisition of localization estimates, as it is a prerequisite to enable more complex tasks, e.g. floating manipulation and mapping. State-of-the-art navigation in commercial operations, such as oil & gas production (OGP), rely on costly instrumentation. These can be partially replaced or assisted by visual navigation methods, especially in deep-sea scenarios where equipment deployment has high costs and risks. Our work presents a multimodal approach that adapts state-of-the-art methods from on-land robotics, i.e., dense point cloud generation in combination with plane representation and registration, to boost underwater localization performance. A two-stage navigation scheme is proposed that initially generates a coarse probabilistic map of the workspace, which is used to filter noise from computed point clouds and planes in the second stage. Furthermore, an adaptive decision-making approach is introduced that determines which perception cues to incorporate into the localization filter to optimize accuracy and computation performance. Our approach is investigated first in simulation and then validated with data from field trials in OGP monitoring and maintenance scenarios.

Haofei Kuang, Qingwen Xu, Sören Schwertfeger

In this work, we exploit a depth estimation Fully Convolutional Residual Neural Network (FCRN) for in-air perspective images to estimate the depth of underwater perspective and omni-directional images. We train one conventional and one spherical FCRN for underwater perspective and omni-directional images, respectively. The spherical FCRN is derived from the perspective FCRN via a spherical longitude-latitude mapping. For that, the omni-directional camera is modeled as a sphere, while images captured by it are displayed in the longitude-latitude form. Due to the lack of underwater datasets, we synthesize images in both data-driven and theoretical ways, which are used in training and testing. Finally, experiments are conducted on these synthetic images and results are displayed in both qualitative and quantitative way. The comparison between ground truth and the estimated depth map indicates the effectiveness of our method.