Shubham Jain

Nicholas Meegan, Hansi Liu, Bryan Cao et al.

We introduce ViFiCon, a self-supervised contrastive learning scheme which uses synchronized information across vision and wireless modalities to perform cross-modal association. Specifically, the system uses pedestrian data collected from RGB-D camera footage as well as WiFi Fine Time Measurements (FTM) from a user's smartphone device. We represent the temporal sequence by stacking multi-person depth data spatially within a banded image. Depth data from RGB-D (vision domain) is inherently linked with an observable pedestrian, but FTM data (wireless domain) is associated only to a smartphone on the network. To formulate the cross-modal association problem as self-supervised, the network learns a scene-wide synchronization of the two modalities as a pretext task, and then uses that learned representation for the downstream task of associating individual bounding boxes to specific smartphones, i.e. associating vision and wireless information. We use a pre-trained region proposal model on the camera footage and then feed the extrapolated bounding box information into a dual-branch convolutional neural network along with the FTM data. We show that compared to fully supervised SoTA models, ViFiCon achieves high performance vision-to-wireless association, finding which bounding box corresponds to which smartphone device, without hand-labeled association examples for training data.

Reena Elangovan, Shubham Jain, Anand Raghunathan

Precision scaling has emerged as a popular technique to optimize the compute and storage requirements of Deep Neural Networks (DNNs). Efforts toward creating ultra-low-precision (sub-8-bit) DNNs suggest that the minimum precision required to achieve a given network-level accuracy varies considerably across networks, and even across layers within a network, requiring support for variable precision in DNN hardware. Previous proposals such as bit-serial hardware incur high overheads, significantly diminishing the benefits of lower precision. To efficiently support precision re-configurability in DNN accelerators, we introduce an approximate computing method wherein DNN computations are performed block-wise (a block is a group of bits) and re-configurability is supported at the granularity of blocks. Results of block-wise computations are composed in an approximate manner to enable efficient re-configurability. We design a DNN accelerator that embodies approximate blocked computation and propose a method to determine a suitable approximation configuration for a given DNN. By varying the approximation configurations across DNNs, we achieve 1.17x-1.73x and 1.02x-2.04x improvement in system energy and performance respectively, over an 8-bit fixed-point (FxP8) baseline, with negligible loss in classification accuracy. Further, by varying the approximation configurations across layers and data-structures within DNNs, we achieve 1.25x-2.42x and 1.07x-2.95x improvement in system energy and performance respectively, with negligible accuracy loss.

Sourjya Roy, Shrihari Sridharan, Shubham Jain et al.

Resistive crossbars have attracted significant interest in the design of Deep Neural Network (DNN) accelerators due to their ability to natively execute massively parallel vector-matrix multiplications within dense memory arrays. However, crossbar-based computations face a major challenge due to a variety of device and circuit-level non-idealities, which manifest as errors in the vector-matrix multiplications and eventually degrade DNN accuracy. To address this challenge, there is a need for tools that can model the functional impact of non-idealities on DNN training and inference. Existing efforts towards this goal are either limited to inference, or are too slow to be used for large-scale DNN training. We propose TxSim, a fast and customizable modeling framework to functionally evaluate DNN training on crossbar-based hardware considering the impact of non-idealities. The key features of TxSim that differentiate it from prior efforts are: (i) It comprehensively models non-idealities during all training operations (forward propagation, backward propagation, and weight update) and (ii) it achieves computational efficiency by mapping crossbar evaluations to well-optimized BLAS routines and incorporates speedup techniques to further reduce simulation time with minimal impact on accuracy. TxSim achieves orders-of-magnitude improvement in simulation speed over prior works, and thereby makes it feasible to evaluate training of large-scale DNNs on crossbars. Our experiments using TxSim reveal that the accuracy degradation in DNN training due to non-idealities can be substantial (3%-10%) for large-scale DNNs, underscoring the need for further research in mitigation techniques. We also analyze the impact of various device and circuit-level parameters and the associated non-idealities to provide key insights that can guide the design of crossbar-based DNN training accelerators.

Shubham Jain, Abhronil Sengupta, Kaushik Roy et al.

Resistive crossbars designed with non-volatile memory devices have emerged as promising building blocks for Deep Neural Network (DNN) hardware, due to their ability to compactly and efficiently realize vector-matrix multiplication (VMM), the dominant computational kernel in DNNs. However, a key challenge with resistive crossbars is that they suffer from a range of device and circuit level non-idealities such as interconnect parasitics, peripheral circuits, sneak paths, and process variations. These non-idealities can lead to errors in VMMs, eventually degrading the DNN's accuracy. It is therefore critical to study the impact of crossbar non-idealities on the accuracy of large-scale DNNs. However, this is challenging because existing device and circuit models are too slow to use in application-level evaluations. We present RxNN, a fast and accurate simulation framework to evaluate large-scale DNNs on resistive crossbar systems. RxNN splits and maps the computations involved in each DNN layer into crossbar operations, and evaluates them using a Fast Crossbar Model (FCM) that accurately captures the errors arising due to crossbar non-idealities while being four-to-five orders of magnitude faster than circuit simulation. FCM models a crossbar-based VMM operation using three stages - non-linear models for the input and output peripheral circuits (DACs and ADCs), and an equivalent non-ideal conductance matrix for the core crossbar array. We implement RxNN by extending the Caffe machine learning framework and use it to evaluate a suite of six large-scale DNNs developed for the ImageNet Challenge. Our experiments reveal that resistive crossbar non-idealities can lead to significant accuracy degradations (9.6%-32%) for these large-scale DNNs. To the best of our knowledge, this work is the first quantitative evaluation of the accuracy of large-scale DNNs on resistive crossbar based hardware.