Chenhui Shao

Beitong Tian, Kuan-Chieh Lu, Ahmadreza Eslaminia et al.

Ultrasonic welding machines play a critical role in the lithium battery industry, facilitating the bonding of batteries with conductors. Ensuring high-quality welding is vital, making tool condition monitoring systems essential for early-stage quality control. However, existing monitoring methods face challenges in cost, downtime, and adaptability. In this paper, we present WeldMon, an affordable ultrasonic welding machine condition monitoring system that utilizes a custom data acquisition system and a data analysis pipeline designed for real-time analysis. Our classification algorithm combines auto-generated features and hand-crafted features, achieving superior cross-validation accuracy (95.8% on average over all testing tasks) compared to the state-of-the-art method (92.5%) in condition classification tasks. Our data augmentation approach alleviates the concept drift problem, enhancing tool condition classification accuracy by 8.3%. All algorithms run locally, requiring only 385 milliseconds to process data for each welding cycle. We deploy WeldMon and a commercial system on an actual ultrasonic welding machine, performing a comprehensive comparison. Our findings highlight the potential for developing cost-effective, high-performance, and reliable tool condition monitoring systems.

Ahmadreza Eslaminia, Kuan-Chieh Lu, Klara Nahrstedt et al.

Ultrasonic metal welding (UMW) is widely used in industrial applications but is sensitive to tool wear, surface contamination, and material variability, which can lead to unexpected process faults and unsatisfactory weld quality. Conventional monitoring systems typically rely on supervised learning models that assume all fault types are known in advance, limiting their ability to handle previously unseen process faults. To address this challenge, this paper proposes an adaptive condition monitoring approach that enables unknown fault detection and few-shot continual learning for UMW. Unknown faults are detected by analyzing hidden-layer representations of a multilayer perceptron and leveraging a statistical thresholding strategy. Once detected, the samples from unknown fault types are incorporated into the existing model through a continual learning procedure that selectively updates only the final layers of the network, which enables the model to recognize new fault types while preserving knowledge of existing classes. To accelerate the labeling process, cosine similarity transformation combined with a clustering algorithm groups similar unknown samples, thereby reducing manual labeling effort. Experimental results using a multi-sensor UMW dataset demonstrate that the proposed method achieves 96% accuracy in detecting unseen fault conditions while maintaining reliable classification of known classes. After incorporating a new fault type using only five labeled samples, the updated model achieves 98% testing classification accuracy. These results demonstrate that the proposed approach enables adaptive monitoring with minimal retraining cost and time. The proposed approach provides a scalable solution for continual learning in condition monitoring where new process conditions may constantly emerge over time and is extensible to other manufacturing processes.

Ahmadreza Eslaminia, Adrian Jackson, Beitong Tian et al.

Fused Deposition Modeling (FDM) is a widely used additive manufacturing (AM) technique valued for its flexibility and cost-efficiency, with applications in a variety of industries including healthcare and aerospace. Recent developments have made affordable FDM machines accessible and encouraged adoption among diverse users. However, the design, planning, and production process in FDM require specialized interdisciplinary knowledge. Managing the complex parameters and resolving print defects in FDM remain challenging. These technical complexities form the most critical barrier preventing individuals without technical backgrounds and even professional engineers without training in other domains from participating in AM design and manufacturing. Large Language Models (LLMs), with their advanced capabilities in text and code processing, offer the potential for addressing these challenges in FDM. However, existing research on LLM applications in this field is limited, typically focusing on specific use cases without providing comprehensive evaluations across multiple models and tasks. To this end, we introduce FDM-Bench, a benchmark dataset designed to evaluate LLMs on FDM-specific tasks. FDM-Bench enables a thorough assessment by including user queries across various experience levels and G-code samples that represent a range of anomalies. We evaluate two closed-source models (GPT-4o and Claude 3.5 Sonnet) and two open-source models (Llama-3.1-70B and Llama-3.1-405B) on FDM-Bench. A panel of FDM experts assess the models' responses to user queries in detail. Results indicate that closed-source models generally outperform open-source models in G-code anomaly detection, whereas Llama-3.1-405B demonstrates a slight advantage over other models in responding to user queries. These findings underscore FDM-Bench's potential as a foundational tool for advancing research on LLM capabilities in FDM.

Manan Mehta, Zhiqiao Dong, Yuhang Yang et al.

Surrogate modeling is an essential data-driven technique for quantifying relationships between input variables and system responses in manufacturing and engineering systems. Two major challenges limit its effectiveness: (1) large data requirements for learning complex nonlinear relationships, and (2) heterogeneous data collected from sources with varying fidelity levels. Multi-task learning (MTL) addresses the first challenge by enabling information sharing across related processes, while multi-fidelity modeling addresses the second by accounting for fidelity-dependent uncertainty. However, existing approaches typically address these challenges separately, and no unified framework simultaneously leverages inter-task similarity and fidelity-dependent data characteristics. This paper develops a novel hierarchical multi-task multi-fidelity (H-MT-MF) framework for Gaussian process-based surrogate modeling. The proposed framework decomposes each task's response into a task-specific global trend and a residual local variability component that is jointly learned across tasks using a hierarchical Bayesian formulation. The framework accommodates an arbitrary number of tasks, design points, and fidelity levels while providing predictive uncertainty quantification. We demonstrate the effectiveness of the proposed method using a 1D synthetic example and a real-world engine surface shape prediction case study. Compared to (1) a state-of-the-art MTL model that does not account for fidelity information and (2) a stochastic kriging model that learns tasks independently, the proposed approach improves prediction accuracy by up to 19% and 23%, respectively. The H-MT-MF framework provides a general and extensible solution for surrogate modeling in manufacturing systems characterized by heterogeneous data sources.

Ahmadreza Eslaminia, Chuhan Cai, Cameron Smith et al.

Additive manufacturing (AM) continues to transform modern manufacturing by enabling flexible, on-demand production of complex geometries across diverse industries. Fused filament fabrication (FFF) has extended AM to laboratories, classrooms, and small production environments, but this accessibility shifts process-planning responsibility to users who may lack manufacturing expertise. A syntactically valid slicer profile can still encode thermally or geometrically harmful settings, and subtle G-code edits can alter extrusion, cooling, or adhesion before a print begins. Pre-print G-code screening catches accidental or adversarial machine-program errors before material or machine time is wasted. This paper proposes LLM-ADAM as a generalizable LLM framework for pre-print anomaly detection in AM. The framework decomposes the task into three roles: Extractor-LLM maps a G-code file to a structured process-parameter schema; Reference-LLM converts printer and material documentation into aligned operating ranges; and Judge-LLM interprets a deterministic deviation table and G-code evidence to decide whether a part is non-defective or belongs to an anomaly class. Printers, materials, and LLM backbones are interchangeable test conditions, not fixed assumptions. We evaluate the framework on an N=200 FFF G-code corpus spanning two desktop printer families, two materials, and five classes including non-defective, under-extrusion, over-extrusion, warping, and stringing. The best framework configuration reaches 87.5% accuracy, compared with 59.5% for the strongest engineered single-LLM baseline. The results show that structured decomposition, rather than backbone strength alone, is the dominant source of improvement, with defect classes identified at or near ceiling for leading configurations while residual errors concentrate on conservative false alarms for non-defective samples.

Ahmadreza Eslaminia, Yuquan Meng, Klara Nahrstedt et al.

Ultrasonic metal welding (UMW) is a key joining technology with widespread industrial applications. Condition monitoring (CM) capabilities are critically needed in UMW applications because process anomalies significantly deteriorate the joining quality. Recently, machine learning models emerged as a promising tool for CM in many manufacturing applications due to their ability to learn complex patterns. Yet, the successful deployment of these models requires substantial training data that may be expensive and time-consuming to collect. Additionally, many existing machine learning models lack generalizability and cannot be directly applied to new process configurations (i.e., domains). Such issues may be potentially alleviated by pooling data across manufacturers, but data sharing raises critical data privacy concerns. To address these challenges, this paper presents a Federated Transfer Learning with Task Personalization (FTL-TP) framework that provides domain generalization capabilities in distributed learning while ensuring data privacy. By effectively learning a unified representation from feature space, FTL-TP can adapt CM models for clients working on similar tasks, thereby enhancing their overall adaptability and performance jointly. To demonstrate the effectiveness of FTL-TP, we investigate two distinct UMW CM tasks, tool condition monitoring and workpiece surface condition classification. Compared with state-of-the-art FL algorithms, FTL-TP achieves a 5.35%--8.08% improvement of accuracy in CM in new target domains. FTL-TP is also shown to perform excellently in challenging scenarios involving unbalanced data distributions and limited client fractions. Furthermore, by implementing the FTL-TP method on an edge-cloud architecture, we show that this method is both viable and efficient in practice. The FTL-TP framework is readily extensible to various other manufacturing applications.

Siyuan Chen, Hanshen Yu, Jamal Yagoobi et al.

Existing approaches to enforcing design constraints in Reinforcement Learning (RL) applications often rely on training-time penalties in the reward function or training/inference-time invalid action masking, but these methods either cannot be modified after training, or are limited in the types of constraints that can be implemented. To address this limitation, we propose Reinforcement Learning Constrained Beam Search (RLCBS) for inference-time refinement in combinatorial optimization problems. This method respects flexible, inference-time constraints that support exclusion of invalid actions and forced inclusion of desired actions, and employs beam search to maximize sequence probability for more sensible constraint incorporation. RLCBS is extensible to RL-based planning and optimization problems that do not require real-time solution, and we apply the method to optimize process parameters for a novel modular testbed for paper drying. An RL agent is trained to minimize energy consumption across varying machine speed levels by generating optimal dryer module and air supply temperature configurations. Our results demonstrate that RLCBS outperforms NSGA-II under complex design constraints on drying module configurations at inference-time, while providing a 2.58-fold or higher speed improvement.

Shichen Li, Chenhui Shao

Food drying is essential for food production, extending shelf life, and reducing transportation costs. Accurate real-time forecasting of drying readiness is crucial for minimizing energy consumption, improving productivity, and ensuring product quality. However, this remains challenging due to the dynamic nature of drying, limited data availability, and the lack of effective predictive analytical methods. To address this gap, we propose an end-to-end multi-modal data fusion framework that integrates in-situ video data with process parameters for real-time food drying readiness forecasting. Our approach leverages a new encoder-decoder architecture with modality-specific encoders and a transformer-based decoder to effectively extract features while preserving the unique structure of each modality. We apply our approach to sugar cookie drying, where time-to-ready is predicted at each timestamp. Experimental results demonstrate that our model achieves an average prediction error of only 15 seconds, outperforming state-of-the-art data fusion methods by 65.69% and a video-only model by 11.30%. Additionally, our model balances prediction accuracy, model size, and computational efficiency, making it well-suited for heterogenous industrial datasets. The proposed model is extensible to various other industrial modality fusion tasks for online decision-making.

Shichen Li, Chenhui Shao

Fruit drying is widely used in food manufacturing to reduce product moisture, ensure product safety, and extend product shelf life. Accurately predicting final moisture content (MC) is critically needed for quality control of drying processes. State-of-the-art methods can build deterministic relationships between process parameters and MC, but cannot adequately account for inherent process variabilities that are ubiquitous in fruit drying. To address this gap, this paper presents a novel multi-modal data fusion framework to effectively fuse two modalities of data: tabular data (process parameters) and high-dimensional image data (images of dried apple slices) to enable accurate MC prediction. The proposed modeling architecture permits flexible adjustment of information portion from tabular and image data modalities. Experimental validation shows that the multi-modal approach improves predictive accuracy substantially compared to state-of-the-art methods. The proposed method reduces root-mean-squared errors by 19.3%, 24.2%, and 15.2% over tabular-only, image-only, and standard tabular-image fusion models, respectively. Furthermore, it is demonstrated that our method is robust in varied tabular-image ratios and capable of effectively capturing inherent small-scale process variabilities. The proposed framework is extensible to a variety of other drying technologies.

Sixian Jia, Ruo-Syuan Mei, Chenhui Shao

Two-photon lithography (TPL) is an advanced additive manufacturing (AM) technique for fabricating high-precision micro-structures. While computer vision (CV) is proofed for automated quality control, existing models are often static, rendering them ineffective in dynamic manufacturing environments. These models typically cannot detect new, unseen defect classes, be efficiently updated from scarce data, or adapt to new part geometries. To address this gap, this paper presents an adaptive CV framework for the entire life-cycle of quality model maintenance. The proposed framework is built upon a same, scale-robust backbone model and integrates three key methodologies: (1) a statistical hypothesis testing framework based on Linear Discriminant Analysis (LDA) for novelty detection, (2) a two-stage, rehearsal-based strategy for few-shot incremental learning, and (3) a few-shot Domain-Adversarial Neural Network (DANN) for few-shot domain adaptation. The framework was evaluated on a TPL dataset featuring hemisphere as source domain and cube as target domain structures, with each domain categorized into good, minor damaged, and damaged quality classes. The hypothesis testing method successfully identified new class batches with 99-100% accuracy. The incremental learning method integrated a new class to 92% accuracy using only K=20 samples. The domain adaptation model bridged the severe domain gap, achieving 96.19% accuracy on the target domain using only K=5 shots. These results demonstrate a robust and data-efficient solution for deploying and maintaining CV models in evolving production scenarios.

Shichen Li, Ahmadreza Eslaminia, Chenhui Shao

Food drying is widely used to reduce moisture content, ensure safety, and extend shelf life. Color evolution of food samples is an important indicator of product quality in food drying. Although existing studies have examined color changes under different drying conditions, current approaches primarily rely on low-dimensional color features and cannot fully capture the complex, dynamic color trajectories of food samples. Moreover, existing modeling approaches lack the ability to generalize to unseen process conditions. To address these limitations, we develop a novel multi-modal color-trajectory prediction method that integrates high-dimensional temporal color information with drying process parameters to enable accurate and data-efficient color trajectory prediction. Under unseen drying conditions, the model attains RMSEs of 2.12 for cookie drying and 1.29 for apple drying, reducing errors by over 90% compared with baseline models. These experimental results demonstrate the model's superior accuracy, robustness, and broad applicability.

Ruo-Syuan Mei, Sixian Jia, Guangze Li et al.

Machine learning, particularly deep learning, is transforming industrial quality inspection. Yet, training robust machine learning models typically requires large volumes of high-quality labeled data, which are expensive, time-consuming, and labor-intensive to obtain in manufacturing. Moreover, defective samples are intrinsically rare, leading to severe class imbalance that degrades model performance. These data constraints hinder the widespread adoption of machine learning-based quality inspection methods in real production environments. Synthetic data generation (SDG) offers a promising solution by enabling the creation of large, balanced, and fully annotated datasets in an efficient, cost-effective, and scalable manner. This paper presents a hybrid SDG framework that integrates simulation-based rendering, domain randomization, and real background compositing to enable zero-shot learning for computer vision-based industrial part inspection without manual annotation. The SDG pipeline generates 12,960 labeled images in one hour by varying part geometry, lighting, and surface properties, and then compositing synthetic parts onto real image backgrounds. A two-stage architecture utilizing a YOLOv8n backbone for object detection and MobileNetV3-small for quality classification is trained exclusively on synthetic data and evaluated on 300 real industrial parts. The proposed approach achieves an mAP@0.5 of 0.995 for detection, 96% classification accuracy, and 90.1% balanced accuracy. Comparative evaluation against few-shot real-data baseline approaches demonstrates significant improvement. The proposed SDG-based approach achieves 90-91% balanced accuracy under severe class imbalance, while the baselines reach only 50% accuracy. These results demonstrate that the proposed method enables annotation-free, scalable, and robust quality inspection for real-world manufacturing applications.

Sixian Jia, Zhiqiao Dong, Chenhui Shao

Two-photon lithography (TPL) is a sophisticated additive manufacturing technology for creating three-dimensional (3D) micro- and nano-structures. Maintaining the health of TPL systems is critical for ensuring consistent fabrication quality. Current maintenance practices often rely on experience rather than informed monitoring of machine health, resulting in either untimely maintenance that causes machine downtime and poor-quality fabrication, or unnecessary maintenance that leads to inefficiencies and avoidable downtime. To address this gap, this paper presents three methods for accurate and timely monitoring of TPL machine health. Through integrating physics-informed data-driven predictive models for structure dimensions with statistical approaches, the proposed methods are able to handle increasingly complex scenarios featuring different levels of generalizability. A comprehensive experimental dataset that encompasses six process parameter combinations and six structure dimensions under two machine health conditions was collected to evaluate the effectiveness of the proposed approaches. Across all test scenarios, the approaches are shown to achieve high accuracies, demonstrating excellent effectiveness, robustness, and generalizability. These results represent a significant step toward condition-based maintenance for TPL systems.