Chao Tang

Ning Yang, Chao Tang, Yuhai Tu

Generalization is one of the most important problems in deep learning (DL). In the overparameterized regime in neural networks, there exist many low-loss solutions that fit the training data equally well. The key question is which solution is more generalizable. Empirical studies showed a strong correlation between flatness of the loss landscape at a solution and its generalizability, and stochastic gradient descent (SGD) is crucial in finding the flat solutions. To understand how SGD drives the learning system to flat solutions, we construct a simple model whose loss landscape has a continuous set of degenerate (or near degenerate) minima. By solving the Fokker-Planck equation of the underlying stochastic learning dynamics, we show that due to its strong anisotropy the SGD noise introduces an additional effective loss term that decreases with flatness and has an overall strength that increases with the learning rate and batch-to-batch variation. We find that the additional landscape-dependent SGD-loss breaks the degeneracy and serves as an effective regularization for finding flat solutions. Furthermore, a stronger SGD noise shortens the convergence time to the flat solutions. However, we identify an upper bound for the SGD noise beyond which the system fails to converge. Our results not only elucidate the role of SGD for generalization they may also have important implications for hyperparameter selection for learning efficiently without divergence.

Li Yi, Shota Ito, Chao Tang et al.

Resonant tunneling diodes (RTDs) support room-temperature terahertz (THz) oscillation and simultaneous THz-band detection, enabling compact monostatic THz sensors for practical and cost-effective sensing applications. In this paper, we present a highly integrated 280 GHz-band radar system based on a single RTD that exploits the self-mixing effect to generate a low-frequency interferometric signal. The resulting self-mixing signal is further analyzed from a radar perspective and processed to extract micrometer-scale displacement and thin-film thickness variations. Experimentally, the proposed system demonstrates a minimum detectable displacement of approximately 5 um and quantitatively resolves polymer film thicknesses of 12.5, 25, and 50 um.

Sixiang Chen, Jinbin Bai, Zhuoran Zhao et al.

The landscape of image generation has rapidly evolved, from early GAN-based approaches to diffusion models and, most recently, to unified generative architectures that seek to bridge understanding and generation tasks. Recent advances, especially the GPT-4o, have demonstrated the feasibility of high-fidelity multimodal generation, their architectural design remains mysterious and unpublished. This prompts the question of whether image and text generation have already been successfully integrated into a unified framework for those methods. In this work, we conduct an empirical study of GPT-4o's image generation capabilities, benchmarking it against leading open-source and commercial models. Our evaluation covers four main categories, including text-to-image, image-to-image, image-to-3D, and image-to-X generation, with more than 20 tasks. Our analysis highlights the strengths and limitations of GPT-4o under various settings, and situates it within the broader evolution of generative modeling. Through this investigation, we identify promising directions for future unified generative models, emphasizing the role of architectural design and data scaling. For a high-definition version of the PDF, please refer to the link on GitHub: \href{https://github.com/Ephemeral182/Empirical-Study-of-GPT-4o-Image-Gen}{https://github.com/Ephemeral182/Empirical-Study-of-GPT-4o-Image-Gen}.

Chao Tang, Anxing Xiao, Yuhong Deng et al.

Imitating tool manipulation from human videos offers an intuitive approach to teaching robots, while also providing a promising and scalable alternative to labor-intensive teleoperation data collection for visuomotor policy learning. While humans can mimic tool manipulation behavior by observing others perform a task just once and effortlessly transfer the skill to diverse tools for functionally equivalent tasks, current robots struggle to achieve this level of generalization. A key challenge lies in establishing function-level correspondences, considering the significant geometric variations among functionally similar tools, referred to as intra-function variations. To address this challenge, we propose MimicFunc, a framework that establishes functional correspondences with function frame, a function-centric local coordinate frame constructed with keypoint-based abstraction, for imitating tool manipulation skills. Experiments demonstrate that MimicFunc effectively enables the robot to generalize the skill from a single RGB-D human video to manipulating novel tools for functionally equivalent tasks. Furthermore, leveraging MimicFunc's one-shot generalization capability, the generated rollouts can be used to train visuomotor policies without requiring labor-intensive teleoperation data collection for novel objects. Our code and video are available at https://sites.google.com/view/mimicfunc.

Wenhao Li, Jie Zhou, Chuan Luo et al.

In the realm of modern mobile E-commerce, providing users with nearby commercial service recommendations through location-based online services has become increasingly vital. While machine learning approaches have shown promise in multi-scene recommendation, existing methodologies often struggle to address cold-start problems in unprecedented scenes: the increasing diversity of commercial choices, along with the short online lifespan of scenes, give rise to the complexity of effective recommendations in online and dynamic scenes. In this work, we propose Scene-wise Adaptive Network (SwAN), a novel approach that emphasizes high-performance cold-start online recommendations for new scenes. Our approach introduces several crucial capabilities, including scene similarity learning, user-specific scene transition cognition, scene-specific information construction for the new scene, and enhancing the diverged logical information between scenes. We demonstrate SwAN's potential to optimize dynamic multi-scene recommendation problems by effectively online handling cold-start recommendations for any newly arrived scenes. More encouragingly, SwAN has been successfully deployed in Meituan's online catering recommendation service, which serves millions of customers per day, and SwAN has achieved a 5.64% CTR index improvement relative to the baselines and a 5.19% increase in daily order volume proportion.

Zhanting Zhou, Kejun Bi, Yuyanzhen Zhong et al.

The strength of a supply chain is an important measure of a country's or region's technical advancement and overall competitiveness. Establishing supply chain risk assessment models for effective management and mitigation of potential risks has become increasingly crucial. As the number of businesses grows, the important relationships become more complicated and difficult to measure. This emphasizes the need of extracting relevant information from graph data. Previously, academics mostly employed knowledge inference to increase the visibility of links between nodes in the supply chain. However, they have not solved the data hunger problem of single node feature characteristics. We propose a hierarchical knowledge transferable graph neural network-based (HKTGNN) supply chain risk assessment model to address these issues. Our approach is based on current graph embedding methods for assessing corporate investment risk assessment. We embed the supply chain network corresponding to individual goods in the supply chain using the graph embedding module, resulting in a directed homogeneous graph with just product nodes. This reduces the complicated supply chain network into a basic product network. It addresses difficulties using the domain difference knowledge transferable module based on centrality, which is presented by the premise that supply chain feature characteristics may be biased in the actual world. Meanwhile, the feature complement and message passing will alleviate the data hunger problem, which is driven by domain differences. Our model outperforms in experiments on a real-world supply chain dataset. We will give an equation to prove that our comparative experiment is both effective and fair.

Ning Yang, Yikuan Zhang, Qi Ouyang et al.

Stochastic gradient descent (SGD) is central to deep learning, yet the dynamical origin of its preference for flatter, more generalizable solutions remains unclear. Here, by analyzing SGD learning dynamics, we identify a nonequilibrium mechanism governing solution selection. Numerical experiments reveal a transient exploratory phase in which SGD trajectories repeatedly escape sharp valleys and transition toward flatter regions of the loss landscape. By using a tractable physical model, we show that the SGD noise reshapes the landscape into an effective potential that favors flat solutions. Crucially, we uncover a transient freezing mechanism: as training proceeds, growing energy barriers suppress inter-valley transitions and ultimately trap the dynamics within a single basin. Increasing the SGD noise strength delays this freezing, which enhances convergence to flatter minima. Together, these results provide a unified physical framework linking learning dynamics, loss-landscape geometry, and generalization, and suggest principles for the design of more effective optimization algorithms.

Chao Tang, Jianzong Wu, Qingyu Shi et al.

Unified multimodal understanding and generation models enable richer human-AI interaction. Yet jointly customizing a character's persona, dialogue style, and visual identity while maintaining output consistency across modalities remains largely unexplored. To mitigate this gap, we introduce a new task, Customized Multimodal Role-Play (CMRP). We construct the RoleScape-20 dataset comprising 20 characters, including training and evaluation data that cover persona, stylistic descriptions, visual/expressive cues, and text-image interactions. Building on a unified model, we devise UniCharacter, a two-stage training framework containing Unified Supervised Finetuning (Unified-SFT) and character-specific group relative policy optimization (Character-GRPO). Given only 10 images plus corresponding interaction examples, the model acquires the target character and exhibits coherent persona, style, and visual identity in both generated text and images. This process takes about 100 GPU hours. Experiments on the RoleScape-20 dataset show that the proposed method substantially outperforms prior approaches. Ablation studies further validate the effectiveness of our cross-modal consistency design and few-shot customization strategy. We argue that CMRP, coupled with unified modeling, provides a basis for next-generation characterful and immersive interactive agents.

Shan An, Ziyu Meng, Chao Tang et al.

Dexterous manipulation, which refers to the ability of a robotic hand or multi-fingered end-effector to skillfully control, reorient, and manipulate objects through precise, coordinated finger movements and adaptive force modulation, enables complex interactions similar to human hand dexterity. With recent advances in robotics and machine learning, there is a growing demand for these systems to operate in complex and unstructured environments. Traditional model-based approaches struggle to generalize across tasks and object variations due to the high dimensionality and complex contact dynamics of dexterous manipulation. Although model-free methods such as reinforcement learning (RL) show promise, they require extensive training, large-scale interaction data, and carefully designed rewards for stability and effectiveness. Imitation learning (IL) offers an alternative by allowing robots to acquire dexterous manipulation skills directly from expert demonstrations, capturing fine-grained coordination and contact dynamics while bypassing the need for explicit modeling and large-scale trial-and-error. This survey provides an overview of dexterous manipulation methods based on imitation learning, details recent advances, and addresses key challenges in the field. Additionally, it explores potential research directions to enhance IL-driven dexterous manipulation. Our goal is to offer researchers and practitioners a comprehensive introduction to this rapidly evolving domain.

Jianzong Wu, Chao Tang, Jingbo Wang et al.

Story visualization, the task of creating visual narratives from textual descriptions, has seen progress with text-to-image generation models. However, these models often lack effective control over character appearances and interactions, particularly in multi-character scenes. To address these limitations, we propose a new task: \textbf{customized manga generation} and introduce \textbf{DiffSensei}, an innovative framework specifically designed for generating manga with dynamic multi-character control. DiffSensei integrates a diffusion-based image generator with a multimodal large language model (MLLM) that acts as a text-compatible identity adapter. Our approach employs masked cross-attention to seamlessly incorporate character features, enabling precise layout control without direct pixel transfer. Additionally, the MLLM-based adapter adjusts character features to align with panel-specific text cues, allowing flexible adjustments in character expressions, poses, and actions. We also introduce \textbf{MangaZero}, a large-scale dataset tailored to this task, containing 43,264 manga pages and 427,147 annotated panels, supporting the visualization of varied character interactions and movements across sequential frames. Extensive experiments demonstrate that DiffSensei outperforms existing models, marking a significant advancement in manga generation by enabling text-adaptable character customization. The project page is https://jianzongwu.github.io/projects/diffsensei/.

Chao Tang, Anxing Xiao, Yuhong Deng et al.

Learning tool use from a single human demonstration video offers a highly intuitive and efficient approach to robot teaching. While humans can effortlessly generalize a demonstrated tool manipulation skill to diverse tools that support the same function (e.g., pouring with a mug versus a teapot), current one-shot imitation learning (OSIL) methods struggle to achieve this. A key challenge lies in establishing functional correspondences between demonstration and test tools, considering significant geometric variations among tools with the same function (i.e., intra-function variations). To address this challenge, we propose FUNCTO (Function-Centric OSIL for Tool Manipulation), an OSIL method that establishes function-centric correspondences with a 3D functional keypoint representation, enabling robots to generalize tool manipulation skills from a single human demonstration video to novel tools with the same function despite significant intra-function variations. With this formulation, we factorize FUNCTO into three stages: (1) functional keypoint extraction, (2) function-centric correspondence establishment, and (3) functional keypoint-based action planning. We evaluate FUNCTO against exiting modular OSIL methods and end-to-end behavioral cloning methods through real-robot experiments on diverse tool manipulation tasks. The results demonstrate the superiority of FUNCTO when generalizing to novel tools with intra-function geometric variations. More details are available at https://sites.google.com/view/functo.

Chao Tang, Jiacheng Xu, Haofei Lu et al.

Building generalist robots capable of performing functional grasping in everyday, open-world environments remains a significant challenge due to the vast diversity of objects and tasks. Existing methods are either constrained to narrow object/task sets or rely on prohibitively large-scale data collection to capture real-world variability. In this work, we present an alternative approach, GraspDreamer, a method that leverages human demonstrations synthesized by visual generative models (VGMs) (e.g., video generation models) to enable zero-shot functional grasping without labor-intensive data collection. The key idea is that VGMs pre-trained on internet-scale human data implicitly encode generalized priors about how humans interact with the physical world, which can be combined with embodiment-specific action optimization to enable functional grasping with minimal effort. Extensive experiments on the public benchmarks with different robot hands demonstrate the superior data efficiency and generalization performance of GraspDreamer compared to previous methods. Real-world evaluations further validate the effectiveness on real robots. Additionally, we showcase that GraspDreamer can (1) be naturally extended to downstream manipulation tasks, and (2) can generate data to support visuomotor policy learning.

Chao Tang, Arwa Dabbech, Adrian Jackson et al.

The next-generation radio-interferometric (RI) telescopes require imaging algorithms capable of forming high-resolution high-dynamic-range images from large data volumes spanning wide frequency bands. Recently, AIRI, a plug-and-play (PnP) approach taking the forward-backward algorithmic structure (FB), has demonstrated state-of-the-art performance in monochromatic RI imaging by alternating a data-fidelity step with a regularisation step via learned denoisers. In this work, we introduce HyperAIRI, its hyperspectral extension, underpinned by learned hyperspectral denoisers enforcing a power-law spectral model. For each spectral channel, the HyperAIRI denoiser takes as input its current image estimate, alongside estimates of its two immediate neighbouring channels and the spectral index map, and provides as output its associated denoised image. To ensure convergence of HyperAIRI, the denoisers are trained with a Jacobian regularisation enforcing non-expansiveness. To accommodate varying dynamic ranges, we assemble a shelf of pre-trained denoisers, each tailored to a specific dynamic range. At each HyperAIRI iteration, the spectral channels of the target image cube are updated in parallel using dynamic-range-matched denoisers from the pre-trained shelf. The denoisers are also endowed with a spatial image faceting functionality, enabling scalability to varied image sizes. Additionally, we formally introduce Hyper-uSARA, a variant of the optimisation-based algorithm HyperSARA, promoting joint sparsity across spectral channels via the l2,1-norm, also adopting FB. We evaluate HyperAIRI's performance on simulated and real observations. We showcase its superior performance compared to its optimisation-based counterpart Hyper-uSARA, CLEAN's hyperspectral variant in WSClean, and the monochromatic imaging algorithms AIRI and uSARA.

Amir Aghabiglou, Chung San Chu, Chao Tang et al.

The R2D2 Deep Neural Network (DNN) series was recently introduced for image formation in radio interferometry. It can be understood as a learned version of CLEAN, whose minor cycles are substituted with DNNs. We revisit R2D2 on the grounds of series convergence, training methodology, and DNN architecture, improving its robustness in terms of generalizability beyond training conditions, capability to deliver high data fidelity, and epistemic uncertainty. First, while still focusing on telescope-specific training, we enhance the learning process by randomizing Fourier sampling integration times, incorporating multiscan multinoise configurations, and varying imaging settings, including pixel resolution and visibility-weighting scheme. Second, we introduce a convergence criterion whereby the reconstruction process stops when the data residual is compatible with noise, rather than simply using all available DNNs. This not only increases the reconstruction efficiency by reducing its computational cost, but also refines training by pruning out the data/image pairs for which optimal data fidelity is reached before training the next DNN. Third, we substitute R2D2's early U-Net DNN with a novel architecture (U-WDSR) combining U-Net and WDSR, which leverages wide activation, dense skip connections, weight normalization, and low-rank convolution to improve feature reuse and reconstruction precision. As previously, R2D2 was trained for monochromatic intensity imaging with the Very Large Array at fixed $512 \times 512$ image size. Simulations on a wide range of inverse problems and a case study on real data reveal that the new R2D2 model consistently outperforms its earlier version in image reconstruction quality, data fidelity, and epistemic uncertainty.

Yiwei Chen, Chao Tang, Amir Aghabiglou et al.

We propose a new approach for non-Cartesian magnetic resonance image reconstruction. While unrolled architectures provide robustness via data-consistency layers, embedding measurement operators in Deep Neural Network (DNN) can become impractical at large scale. Alternative Plug-and-Play (PnP) approaches, where the denoising DNNs are blind to the measurement setting, are not affected by this limitation and have also proven effective, but their highly iterative nature also affects scalability. To address this scalability challenge, we leverage the "Residual-to-Residual DNN series for high-Dynamic range imaging (R2D2)" approach recently introduced in astronomical imaging. R2D2's reconstruction is formed as a series of residual images, iteratively estimated as outputs of DNNs taking the previous iteration's image estimate and associated data residual as inputs. The method can be interpreted as a learned version of the Matching Pursuit algorithm. We demonstrate R2D2 in simulation, considering radial k-space sampling acquisition sequences. Our preliminary results suggest that R2D2 achieves: (i) suboptimal performance compared to its unrolled incarnation R2D2-Net, which is however non-scalable due to the necessary embedding of NUFFT-based data-consistency layers; (ii) superior reconstruction quality to a scalable version of R2D2-Net embedding an FFT-based approximation for data consistency; (iii) superior reconstruction quality to PnP, while only requiring few iterations.

Chengjie Zhang, Chao Tang, Wenlong Dong et al.

Interactive Imitation Learning (IIL) typically relies on extensive human involvement for both offline demonstration and online interaction. Prior work primarily focuses on reducing human effort in passive monitoring rather than active operation. Interestingly, structured model-based imitation approaches achieve comparable performance with significantly fewer demonstrations than end-to-end imitation learning policies in the low-data regime. However, these methods are typically surpassed by end-to-end policies as the data increases. Leveraging this insight, we propose Easy-IIL, a framework that utilizes off-the-shelf model-based imitation methods as an assistant expert to replace active human operation for the majority of data collection. The human expert only provides a single demonstration to initialize the assistant expert and intervenes in critical states where the task is approaching failure. Furthermore, Easy-IIL can maintain IIL performance by preserving both offline and online data quality. Extensive simulation and real-world experiments demonstrate that Easy-IIL significantly reduces human operational burden while maintaining performance comparable to mainstream IIL baselines. User studies further confirm that Easy-IIL reduces subjective workload on the human expert. Project page: https://sites.google.com/view/easy-iil

Yuhong Deng, Chao Tang, Cunjun Yu et al.

Clothes manipulation, such as folding or hanging, is a critical capability for home service robots. Despite recent advances, most existing methods remain limited to specific clothes types and tasks, due to the complex, high-dimensional geometry of clothes. This paper presents CLothes mAnipulation with Semantic keyPoints (CLASP), which aims at general-purpose clothes manipulation over diverse clothes types, T-shirts, shorts, skirts, long dresses, ..., as well as different tasks, folding, flattening, hanging, .... The core idea of CLASP is semantic keypoints-e.g., ''left sleeve'' and ''right shoulder''-a sparse spatial-semantic representation, salient for both perception and action. Semantic keypoints of clothes can be reliably extracted from RGB-D images and provide an effective representation for a wide range of clothes manipulation policies. CLASP uses semantic keypoints as an intermediate representation to connect high-level task planning and low-level action execution. At the high level, it exploits vision language models (VLMs) to predict task plans over the semantic keypoints. At the low level, it executes the plans with the help of a set of pre-built manipulation skills conditioned on the keypoints. Extensive simulation experiments show that CLASP outperforms state-of-the-art baseline methods on multiple tasks across diverse clothes types, demonstrating strong performance and generalization. Further experiments with a Franka dual-arm system on four distinct tasks-folding, flattening, hanging, and placing-confirm CLASP's performance on real-life clothes manipulation.

Yiwei Chen, Amir Aghabiglou, Shijie Chen et al.

We introduce the R2D2 Deep Neural Network (DNN) series paradigm for fast and scalable image reconstruction from highly-accelerated non-Cartesian k-space acquisitions in Magnetic Resonance Imaging (MRI). While unrolled DNN architectures provide a robust image formation approach via data-consistency layers, embedding non-uniform fast Fourier transform operators in a DNN can become impractical to train at large scale, e.g in 2D MRI with a large number of coils, or for higher-dimensional imaging. Plug-and-play approaches that alternate a learned denoiser blind to the measurement setting with a data-consistency step are not affected by this limitation but their highly iterative nature implies slow reconstruction. To address this scalability challenge, we leverage the R2D2 paradigm that was recently introduced to enable ultra-fast reconstruction for large-scale Fourier imaging in radio astronomy. R2D2's reconstruction is formed as a series of residual images iteratively estimated as outputs of DNN modules taking the previous iteration's data residual as input. The method can be interpreted as a learned version of the Matching Pursuit algorithm. A series of R2D2 DNN modules were sequentially trained in a supervised manner on the fastMRI dataset and validated for 2D multi-coil MRI in simulation and on real data, targeting highly under-sampled radial k-space sampling. Results suggest that a series with only few DNNs achieves superior reconstruction quality over its unrolled incarnation R2D2-Net (whose training is also much less scalable), and over the state-of-the-art diffusion-based "Decomposed Diffusion Sampler" approach (also characterised by a slower reconstruction process).

Matthieu Terris, Arwa Dabbech, Chao Tang et al.

We introduce a new class of iterative image reconstruction algorithms for radio interferometry, at the interface of convex optimization and deep learning, inspired by plug-and-play methods. The approach consists in learning a prior image model by training a deep neural network (DNN) as a denoiser, and substituting it for the handcrafted proximal regularization operator of an optimization algorithm. The proposed AIRI (``AI for Regularization in radio-interferometric Imaging'') framework, for imaging complex intensity structure with diffuse and faint emission from visibility data, inherits the robustness and interpretability of optimization, and the learning power and speed of networks. Our approach relies on three steps. Firstly, we design a low dynamic range training database from optical intensity images. Secondly, we train a DNN denoiser at a noise level inferred from the signal-to-noise ratio of the data. We use training losses enhanced with a nonexpansiveness term ensuring algorithm convergence, and including on-the-fly database dynamic range enhancement via exponentiation. Thirdly, we plug the learned denoiser into the forward-backward optimization algorithm, resulting in a simple iterative structure alternating a denoising step with a gradient-descent data-fidelity step. We have validated AIRI against CLEAN, optimization algorithms of the SARA family, and a DNN trained to reconstruct the image directly from visibility data. Simulation results show that AIRI is competitive in imaging quality with SARA and its unconstrained forward-backward-based version uSARA, while providing significant acceleration. CLEAN remains faster but offers lower quality. The end-to-end DNN offers further acceleration, but with far lower quality than AIRI.

Yunzhi Lin, Chao Tang, Fu-Jen Chu et al.

Shape informs how an object should be grasped, both in terms of where and how. As such, this paper describes a segmentation-based architecture for decomposing objects sensed with a depth camera into multiple primitive shapes, along with a post-processing pipeline for robotic grasping. Segmentation employs a deep network, called PS-CNN, trained on synthetic data with 6 classes of primitive shapes and generated using a simulation engine. Each primitive shape is designed with parametrized grasp families, permitting the pipeline to identify multiple grasp candidates per shape region. The grasps are rank ordered, with the first feasible one chosen for execution. For task-free grasping of individual objects, the method achieves a 94.2% success rate placing it amongst the top performing grasp methods when compared to top-down and SE(3)-based approaches. Additional tests involving variable viewpoints and clutter demonstrate robustness to setup. For task-oriented grasping, PS-CNN achieves a 93.0% success rate. Overall, the outcomes support the hypothesis that explicitly encoding shape primitives within a grasping pipeline should boost grasping performance, including task-free and task-relevant grasp prediction.

Chao Tang, Jingwen Yu, Weinan Chen et al.

In this paper, we propose Manipulation Relationship Graph (MRG), a novel affordance representation which captures the underlying manipulation relationships of an arbitrary scene. To construct such a graph from raw visual observations, a deep nerual network named AR-Net is introduced. It consists of an Attribute module and a Context module, which guide the relationship learning at object and subgraph level respectively. We quantitatively validate our method on a novel manipulation relationship dataset named SMRD. To evaluate the performance of the proposed model and representation, both visual perception and physical manipulation experiments are conducted. Overall, AR-Net along with MRG outperforms all baselines, achieving the success rate of 88.89% on task relationship recognition (TRR) and 73.33% on task completion (TC)

Chao Tang, Yifei Fan, Anthony Yezzi

The safety and robustness of learning-based decision-making systems are under threats from adversarial examples, as imperceptible perturbations can mislead neural networks to completely different outputs. In this paper, we present an adaptive view of the issue via evaluating various test-time smoothing defense against white-box untargeted adversarial examples. Through controlled experiments with pretrained ResNet-152 on ImageNet, we first illustrate the non-monotonic relation between adversarial attacks and smoothing defenses. Then at the dataset level, we observe large variance among samples and show that it is easy to inflate accuracy (even to 100%) or build large-scale (i.e., with size ~10^4) subsets on which a designated method outperforms others by a large margin. Finally at the sample level, as different adversarial examples require different degrees of defense, the potential advantages of iterative methods are also discussed. We hope this paper reveal useful behaviors of test-time defenses, which could help improve the evaluation process for adversarial robustness in the future.

Yunzhi Lin, Chao Tang, Fu-Jen Chu et al.

A segmentation-based architecture is proposed to decompose objects into multiple primitive shapes from monocular depth input for robotic manipulation. The backbone deep network is trained on synthetic data with 6 classes of primitive shapes generated by a simulation engine. Each primitive shape is designed with parametrized grasp families, permitting the pipeline to identify multiple grasp candidates per shape primitive region. The grasps are priority ordered via proposed ranking algorithm, with the first feasible one chosen for execution. On task-free grasping of individual objects, the method achieves a 94% success rate. On task-oriented grasping, it achieves a 76% success rate. Overall, the method supports the hypothesis that shape primitives can support task-free and task-relevant grasp prediction.

Fu-Jen Chu, Ruinian Xu, Chao Tang et al.

Affordance information about a scene provides important clues as to what actions may be executed in pursuit of meeting a specified goal state. Thus, integrating affordance-based reasoning into symbolic action plannning pipelines would enhance the flexibility of robot manipulation. Unfortunately, the top performing affordance recognition methods use object category priors to boost the accuracy of affordance detection and segmentation. Object priors limit generalization to unknown object categories. This paper describes an affordance recognition pipeline based on a category-agnostic region proposal network for proposing instance regions of an image across categories. To guide affordance learning in the absence of category priors, the training process includes the auxiliary task of explicitly inferencing existing affordances within a proposal. Secondly, a self-attention mechanism trained to interpret each proposal learns to capture rich contextual dependencies through the region. Visual benchmarking shows that the trained network, called AffContext, reduces the performance gap between object-agnostic and object-informed affordance recognition. AffContext is linked to the Planning Domain Definition Language (PDDL) with an augmented state keeper for action planning across temporally spaced goal-oriented tasks. Manipulation experiments show that AffContext can successfully parse scene content to seed a symbolic planner problem specification, whose execution completes the target task. Additionally, task-oriented grasping for cutting and pounding actions demonstrate the exploitation of multiple affordances for a given object to complete specified tasks.

Tengfei Long, Zhaoming Zhang, Guojin He et al.

Heretofore, global burned area (BA) products are only available at coarse spatial resolution, since most of the current global BA products are produced with the help of active fire detection or dense time-series change analysis, which requires very high temporal resolution. In this study, however, we focus on automated global burned area mapping approach based on Landsat images. By utilizing the huge catalog of satellite imagery as well as the high-performance computing capacity of Google Earth Engine, we proposed an automated pipeline for generating 30-meter resolution global-scale annual burned area map from time-series of Landsat images, and a novel 30-meter resolution global annual burned area map of 2015 (GABAM 2015) is released. GABAM 2015 consists of spatial extent of fires that occurred during 2015 and not of fires that occurred in previous years. Cross-comparison with recent Fire_cci version 5.0 BA product found a similar spatial distribution and a strong correlation ($R^2=0.74$) between the burned areas from the two products, although differences were found in specific land cover categories (particularly in agriculture land). Preliminary global validation showed the commission and omission error of GABAM 2015 are 13.17% and 30.13%, respectively.