Sharad Joshi

Sushovan Jena, Arya Pulkit, Kajal Singh et al.

With the rapid advances in deep learning and smart manufacturing in Industry 4.0, there is an imperative for high-throughput, high-performance, and fully integrated visual inspection systems. Most anomaly detection approaches using defect detection datasets, such as MVTec AD, employ one-class models that require fitting separate models for each class. On the contrary, unified models eliminate the need for fitting separate models for each class and significantly reduce cost and memory requirements. Thus, in this work, we experiment with considering a unified multi-class setup. Our experimental study shows that multi-class models perform at par with one-class models for the standard MVTec AD dataset. Hence, this indicates that there may not be a need to learn separate object/class-wise models when the object classes are significantly different from each other, as is the case of the dataset considered. Furthermore, we have deployed three different unified lightweight architectures on the CPU and an edge device (NVIDIA Jetson Xavier NX). We analyze the quantized multi-class anomaly detection models in terms of latency and memory requirements for deployment on the edge device while comparing quantization-aware training (QAT) and post-training quantization (PTQ) for performance at different precision widths. In addition, we explored two different methods of calibration required in post-training scenarios and show that one of them performs notably better, highlighting its importance for unsupervised tasks. Due to quantization, the performance drop in PTQ is further compensated by QAT, which yields at par performance with the original 32-bit Floating point in two of the models considered.

Sushovan Jena, Vishwas Saini, Ujjwal Shaw et al.

Unsupervised anomaly detection encompasses diverse applications in industrial settings where a high-throughput and precision is imperative. Early works were centered around one-class-one-model paradigm, which poses significant challenges in large-scale production environments. Knowledge-distillation based multi-class anomaly detection promises a low latency with a reasonably good performance but with a significant drop as compared to one-class version. We propose a DCAM (Distributed Convolutional Attention Module) which improves the distillation process between teacher and student networks when there is a high variance among multiple classes or objects. Integrated multi-scale feature matching strategy to utilise a mixture of multi-level knowledge from the feature pyramid of the two networks, intuitively helping in detecting anomalies of varying sizes which is also an inherent problem in the multi-class scenario. Briefly, our DCAM module consists of Convolutional Attention blocks distributed across the feature maps of the student network, which essentially learns to masks the irrelevant information during student learning alleviating the "cross-class interference" problem. This process is accompanied by minimizing the relative entropy using KL-Divergence in Spatial dimension and a Channel-wise Cosine Similarity between the same feature maps of teacher and student. The losses enables to achieve scale-invariance and capture non-linear relationships. We also highlight that the DCAM module would only be used during training and not during inference as we only need the learned feature maps and losses for anomaly scoring and hence, gaining a performance gain of 3.92% than the multi-class baseline with a preserved latency.

Sharad Joshi, Pawel Korus, Nitin Khanna et al.

We assess the variability of PRNU-based camera fingerprints with mismatched imaging pipelines (e.g., different camera ISP or digital darkroom software). We show that camera fingerprints exhibit non-negligible variations in this setup, which may lead to unexpected degradation of detection statistics in real-world use-cases. We tested 13 different pipelines, including standard digital darkroom software and recent neural-networks. We observed that correlation between fingerprints from mismatched pipelines drops on average to 0.38 and the PCE detection statistic drops by over 40%. The degradation in error rates is the strongest for small patches commonly used in photo manipulation detection, and when neural networks are used for photo development. At a fixed 0.5% FPR setting, the TPR drops by 17 ppt (percentage points) for 128 px and 256 px patches.

Sharad Joshi, Suraj Saxena, Nitin Khanna

Vast volumes of printed documents continue to be used for various important as well as trivial applications. Such applications often rely on the information provided in the form of printed text documents whose integrity verification poses a challenge due to time constraints and lack of resources. Source printer identification provides essential information about the origin and integrity of a printed document in a fast and cost-effective manner. Even when fraudulent documents are identified, information about their origin can help stop future frauds. If a smartphone camera replaces scanner for the document acquisition process, document forensics would be more economical, user-friendly, and even faster in many applications where remote and distributed analysis is beneficial. Building on existing methods, we propose to learn a single CNN model from the fusion of letter images and their printer-specific noise residuals. In the absence of any publicly available dataset, we created a new dataset consisting of 2250 document images of text documents printed by eighteen printers and acquired by a smartphone camera at five acquisition settings. The proposed method achieves 98.42% document classification accuracy using images of letter 'e' under a 5x2 cross-validation approach. Further, when tested using about half a million letters of all types, it achieves 90.33% and 98.01% letter and document classification accuracies, respectively, thus highlighting the ability to learn a discriminative model without dependence on a single letter type. Also, classification accuracies are encouraging under various acquisition settings, including low illumination and change in angle between the document and camera planes.

Sharad Joshi, Suraj Saxena, Nitin Khanna

Knowledge of source smartphone corresponding to a document image can be helpful in a variety of applications including copyright infringement, ownership attribution, leak identification and usage restriction. In this letter, we investigate a convolutional neural network-based approach to solve source smartphone identification problem for printed text documents which have been captured by smartphone cameras and shared over messaging platform. In absence of any publicly available dataset addressing this problem, we introduce a new image dataset consisting of 315 images of documents printed in three different fonts, captured using 21 smartphones and shared over WhatsApp. Experiments conducted on this dataset demonstrate that, in all scenarios, the proposed system performs as well as or better than the state-of-the-art system based on handcrafted features and classification of letters extracted from document images. The new dataset and code of the proposed system will be made publicly available along with this letter's publication, presently they are submitted for review.

Sharad Joshi, Nitin Khanna

The knowledge of source printer can help in printed text document authentication, copyright ownership, and provide important clues about the author of a fraudulent document along with his/her potential means and motives. Development of automated systems for classifying printed documents based on their source printer, using image processing techniques, is gaining a lot of attention in multimedia forensics. Currently, state-of-the-art systems require that the font of letters present in test documents of unknown origin must be available in those used for training the classifier. In this work, we attempt to take the first step towards overcoming this limitation. Specifically, we introduce a novel printer specific local texture descriptor. The highlight of our technique is the use of encoding and regrouping strategy based on small linear-shaped structures composed of pixels having similar intensity and gradient. The results of experiments performed on two separate datasets show that: 1) on a publicly available dataset, the proposed method outperforms state-of-the-art algorithms for characters printed in the same font, and 2) on another dataset\footnote{Code and dataset will be made publicly available with published version of this paper.} having documents printed in four different fonts, the proposed method correctly classifies all test samples when sufficient training data is available in same font setup. In addition, it outperforms state-of-the-art methods for cross font experiments. Moreover, it reduces the confusion between the printers of same brand and model.

Sharad Joshi, Nitin Khanna

An important aspect of examining printed documents for potential forgeries and copyright infringement is the identification of source printer as it can be helpful for ascertaining the leak and detecting forged documents. This paper proposes a system for classification of source printer from scanned images of printed documents using all the printed letters simultaneously. This system uses local texture patterns based features and a single classifier for classifying all the printed letters. Letters are extracted from scanned images using connected component analysis followed by morphological filtering without the need of using an OCR. Each letter is sub-divided into a flat region and an edge region, and local tetra patterns are estimated separately for these two regions. A strategically constructed pooling technique is used to extract the final feature vectors. The proposed method has been tested on both a publicly available dataset of 10 printers and a new dataset of 18 printers scanned at a resolution of 600 dpi as well as 300 dpi printed in four different fonts. The results indicate shape independence property in the proposed method as using a single classifier it outperforms existing handcrafted feature-based methods and needs much smaller number of training pages by using all the printed letters.

Hardik Jain, Gaurav Gupta, Sharad Joshi et al.

In this digital era, one thing that still holds the convention is a printed archive. Printed documents find their use in many critical domains such as contract papers, legal tenders and proof of identity documents. As more advanced printing, scanning and image editing techniques are becoming available, forgeries on these legal tenders pose a serious threat. Ability to easily and reliably identify source printer of a printed document can help a lot in reducing this menace. During printing procedure, printer hardware introduces certain distortions in printed characters' locations and shapes which are invisible to naked eyes. These distortions are referred as geometric distortions, their profile (or signature) is generally unique for each printer and can be used for printer classification purpose. This paper proposes a set of features for characterizing text-line-level geometric distortions, referred as geometric distortion signatures and presents a novel system to use them for identification of the origin of a printed document. Detailed experiments performed on a set of thirteen printers demonstrate that the proposed system achieves state of the art performance and gives much higher accuracy under small training size constraint. For four training and six test pages of three different fonts, the proposed method gives 99\% classification accuracy.