Mahdi Aliyari Shoorehdeli

Vahid MohammadZadeh Eivaghi, Mahdi Aliyari Shoorehdeli

False and nuisance alarms in industrial fault detection systems are often triggered by uncertainty, causing normal process variable fluctuations to be erroneously identified as faults. This paper introduces a novel encoder-based residual design that effectively decouples the stochastic and deterministic components of process variables without imposing detection delay. The proposed model employs two distinct encoders to factorize the latent space into two orthogonal spaces: one for the deterministic part and the other for the stochastic part. To ensure the identifiability of the desired spaces, constraints are applied during training. The deterministic space is constrained to be smooth to guarantee determinism, while the stochastic space is required to resemble standard Gaussian noise. Additionally, a decorrelation term enforces the independence of the learned representations. The efficacy of this approach is demonstrated through numerical examples and its application to the Tennessee Eastman process, highlighting its potential for robust fault detection. By focusing decision logic solely on deterministic factors, the proposed model significantly enhances prediction quality while achieving nearly zero false alarms and missed detections, paving the way for improved operational safety and integrity in industrial environments.

Ardavan Modarres, Vahid Mohammad-Zadeh Eivaghi, Mahdi Aliyari Shoorehdeli et al.

Due to the incapability of one sensory measurement to provide enough information for condition monitoring of some complex engineered industrial mechanisms and also for overcoming the misleading noise of a single sensor, multiple sensors are installed to improve the condition monitoring of some industrial equipment. Therefore, an efficient data fusion strategy is demanded. In this research, we presented a Denoising Multi-Modal Autoencoder with a unique training strategy based on contrastive learning paradigm, both being utilized for the first time in the machine health monitoring realm. The presented approach, which leverages the merits of both supervised and unsupervised learning, not only achieves excellent performance in fusing multiple modalities (or views) of data into an enriched common representation but also takes data fusion to the next level wherein one of the views can be omitted during inference time with very slight performance reduction, or even without any reduction at all. The presented methodology enables multi-modal fault diagnosis systems to perform more robustly in case of sensor failure occurrence, and one can also intentionally omit one of the sensors (the more expensive one) in order to build a more cost-effective condition monitoring system without sacrificing performance for practical purposes. The effectiveness of the presented methodology is examined on a real-world private multi-modal dataset gathered under non-laboratory conditions from a complex engineered mechanism, an inline four-stroke spark-ignition engine, aiming for spark plug fault diagnosis. This dataset, which contains the accelerometer and acoustic signals as two modalities, has a very slight amount of fault, and achieving good performance on such a dataset promises that the presented method can perform well on other equipment as well.

Mohammad Hossein Modirrousta, Mahdi Aliyari Shoorehdeli, Mostafa Yari et al.

There is growing importance to detecting faults and implementing the best methods in industrial and real-world systems. We are searching for the most trustworthy and practical data-based fault detection methods proposed by artificial intelligence applications. In this paper, we propose a framework for fault detection based on reinforcement learning and a policy known as proximal policy optimization. As a result of the lack of fault data, one of the significant problems with the traditional policy is its weakness in detecting fault classes, which was addressed by changing the cost function. Using modified Proximal Policy Optimization, we can increase performance, overcome data imbalance, and better predict future faults. When our modified policy is implemented, all evaluation metrics will increase by $3\%$ to $4\%$ as compared to the traditional policy in the first benchmark, between $20\%$ and $55\%$ in the second benchmark, and between $6\%$ and $14\%$ in the third benchmark, as well as an improvement in performance and prediction speed compared to previous methods.

Vahid MohammadZadeh Eivaghi, Mahdi Aliyari Shoorehdeli

Understanding output variance is critical in modeling nonlinear dynamic systems, as it reflects the system's sensitivity to input variations and feature interactions. This work presents a methodology for dynamically determining relevance scores in black-box models while ensuring interpretability through an embedded decision module. This interpretable module, integrated into the first layer of the model, employs the Fisher Information Matrix (FIM) and logistic regression to compute relevance scores, interpreted as the probabilities of input neurons being active based on their contribution to the output variance. The proposed method leverages a gradient-based framework to uncover the importance of variance-driven features, capturing both individual contributions and complex feature interactions. These relevance scores are applied through element-wise transformations of the inputs, enabling the black-box model to prioritize features dynamically based on their impact on system output. This approach effectively bridges interpretability with the intricate modeling of nonlinear dynamics and time-dependent interactions. Simulation results demonstrate the method's ability to infer feature interactions while achieving superior performance in feature relevance compared to existing techniques. The practical utility of this approach is showcased through its application to an industrial pH neutralization process, where critical system dynamics are uncovered.

Maedeh Sadeghi, Mahdi Aliyari Shoorehdeli, Shole jamali et al.

In brain neural networks, Local Field Potential (LFP) signals represent the dynamic flow of information. Analyzing LFP clinical data plays a critical role in improving our understanding of brain mechanisms. One way to enhance our understanding of these mechanisms is to identify a global model to predict brain signals in different situations. This paper identifies a global data-driven based on LFP recordings of the Nucleus Accumbens and Hippocampus regions in freely moving rats. The LFP is recorded from each rat in two different situations: before and after the process of getting a reward which can be either a drug (Morphine) or natural food (like popcorn or biscuit). A comparison of five machine learning methods including Long Short Term Memory (LSTM), Echo State Network (ESN), Deep Echo State Network (DeepESN), Radial Basis Function (RBF), and Local Linear Model Tree (LLM) is conducted to develop this model. LoLiMoT was chosen with the best performance among all methods. This model can predict the future states of these regions with one pre-trained model. Identifying this model showed that Morphine and natural rewards do not change the dynamic features of neurons in these regions.

Mohammad Sadegh Sadeghi Garmaroodi, Faezeh Farivar, Mohammad Sayad Haghighi et al.

Industry 4.0 will make manufacturing processes smarter but this smartness requires more environmental awareness, which in case of Industrial Internet of Things, is realized by the help of sensors. This article is about industrial pharmaceutical systems and more specifically, water purification systems. Purified water which has certain conductivity is an important ingredient in many pharmaceutical products. Almost every pharmaceutical company has a water purifying unit as a part of its interdependent systems. Early detection of faults right at the edge can significantly decrease maintenance costs and improve safety and output quality, and as a result, lead to the production of better medicines. In this paper, with the help of a few sensors and data mining approaches, an anomaly detection system is built for CHRIST Osmotron water purifier. This is a practical research with real-world data collected from SinaDarou Labs Co. Data collection was done by using six sensors over two-week intervals before and after system overhaul. This gave us normal and faulty operation samples. Given the data, we propose two anomaly detection approaches to build up our edge fault detection system. The first approach is based on supervised learning and data mining e.g. by support vector machines. However, since we cannot collect all possible faults data, an anomaly detection approach is proposed based on normal system identification which models the system components by artificial neural networks. Extensive experiments are conducted with the dataset generated in this study to show the accuracy of the data-driven and model-based anomaly detection methods.

Hossein Shahabadi Farahani, Alireza Fatehi, Alireza Nadali et al.

In this paper, a new approach is proposed for designing transferable soft sensors. Soft sensing is one of the significant applications of data-driven methods in the condition monitoring of plants. While hard sensors can be easily used in various plants, soft sensors are confined to the specific plant they are designed for and cannot be used in a new plant or even used in some new working conditions in the same plant. In this paper, a solution is proposed for this underlying obstacle in data-driven condition monitoring systems. Data-driven methods suffer from the fact that the distribution of the data by which the models are constructed may not be the same as the distribution of the data to which the model will be applied. This ultimately leads to the decline of models accuracy. We proposed a new transfer learning (TL) based regression method, called Domain Adversarial Neural Network Regression (DANN-R), and employed it for designing transferable soft sensors. We used data collected from the SCADA system of an industrial power plant to comprehensively investigate the functionality of the proposed method. The result reveals that the proposed transferable soft sensor can successfully adapt to new plants.

Hossein Shahabadi Farahani, Alireza Fatehi, Mahdi Aliyari Shoorehdeli

In this paper, we present a new idea for Transfer Learning (TL) based on Gibbs Sampling. Gibbs sampling is an algorithm in which instances are likely to transfer to a new state with a higher possibility with respect to a probability distribution. We find that such an algorithm can be employed to transfer instances between domains. Restricted Boltzmann Machine (RBM) is an energy based model that is very feasible for being trained to represent a data distribution and also for performing Gibbs sampling. We used RBM to capture data distribution of the source domain and use it in order to cast target instances into new data with a distribution similar to the distribution of source data. Using datasets that are commonly used for evaluation of TL methods, we show that our method can successfully enhance target classification by a considerable ratio. Additionally, the proposed method has the advantage over common DA methods that it needs no target data during the process of training of models.

Sahar Hojjatinia, Mahdi Aliyari Shoorehdeli, Zahra Fatahi et al.

Introduction- Identifying the potential firing patterns following different brain regions under normal and abnormal conditions increases our understanding of events at the level of neural interactions in the brain. The Izhikevich model is one of the simplest biologically plausible models, i.e. capable of capturing the most recognized firing patterns of neurons. This property makes the model efficient in simulating the large-scale networks of neurons. Improving the Izhikevich model for adapting to the neuronal activity of the rat brain with great accuracy would make the model effective for future neural network implementations. Methods- Data sampling from two brain regions, the HIP and BLA, was performed by the extracellular recordings of male rats, and spike sorting was conducted by Plexon offline sorter. Further analyses were performed through NeuroExplorer and MATLAB. To optimize the Izhikevich model parameters, a genetic algorithm was used. The process of comparison in each iteration leads to the survival of better populations until achieving the optimum solution. Results- In the present study, the possible firing patterns of the real single neurons of the HIP and BLA were identified. Additionally, an improved Izhikevich model was achieved. Accordingly, the real neuronal spiking pattern of these regions neurons and the corresponding cases of the Izhikevich neuron spiking pattern were adjusted with great accuracy. Conclusion- This study was conducted to elevate our knowledge of neural interactions in different structures of the brain and accelerate the quality of future large-scale neural network simulations, as well as reducing the modeling complexity. This aim was achievable by performing the improved Izhikevich model, and inserting only the plausible firing patterns, and eliminating unrealistic ones.