Changsheng You

Tiantian Ma, Beixiong Zheng, Changsheng You et al.

Low Earth orbit (LEO) satellite links experience rapid angular variation due to high orbital velocities, which causes severe beam misalignment and array gain degradation under conventional fixed-antenna architectures. In this letter, we propose a rotatable antenna (RA)-enabled LEO communication framework, where RA arrays are deployed at both the satellite and the ground node (GN) to exploit antenna boresight reconfiguration as an additional spatial degree-of-freedom (DoF) for maintaining directional alignment under high mobility. By leveraging the rank-one line-of-sight (LoS) channel structure inherent to satellite links, we derive closed-form solutions for the joint design of the transmit/receive beamforming and antenna boresight directions, revealing that optimal performance can be achieved via decoupled alignment across antennas with low computational complexity. To enable practical operation under dynamic conditions, we further develop a channel estimation and beam tracking protocol that exploits the predictable satellite orbit to continuously update boresight directions with low training overhead. Simulation results demonstrate that the proposed RA-enabled design significantly outperforms fixed and random boresight baselines in terms of achievable rate and robustness to angular variations, highlighting the effectiveness of rotational spatial reconfiguration in high-mobility satellite communications.

Mingjiang Wu, Changsheng You, Xianfu Lei

For near-field communications, it is a hardware-efficient means to form an extremely large-scale array (XL-array) by concatenating multiple modular arrays (also referred to as subarrays). In this letter, we aim to investigate the effect of time synchronization errors among transmissions of different subarrays on the beam-focusing performance. To this end, we first characterize the beam pattern function when the transmit beamforming is designed based on maximum ratio transmission (MRT) under the premise of perfect time synchronization. As this function is highly difficult for analysis, we then consider a typical case with two subarrays. Interestingly, we show that for this case, the beam-focusing effect still persists even in the presence of time synchronization errors, while the focused location is deviated from the user location with an angle offset upper-bounded by 1/M, where M denotes the number of antennas in each subarray. Subsequently, for the general case with multiple subarrays, despite analytical intractability, we numerically show that time synchronization errors give rise to an imbricated (instead of focused) beam pattern. This may significantly degrade multi-user communication performance in practice due to the reduced desired signal power and increased inter-user interference.

Beixiong Zheng, Qingjie Wu, Xue Xiong et al.

Non-fixed flexible antenna architectures, such as fluid antenna system (FAS), movable antenna (MA), and pinching antenna, have garnered significant interest in recent years. Among them, rotatable antenna (RA) has emerged as a promising technology for enhancing wireless communication and sensing performance through flexible antenna orientation/boresight rotation. By enabling mechanical or electronic boresight adjustment without altering physical antenna positions, RA introduces additional spatial degrees of freedom (DoFs) beyond conventional beamforming. In this paper, we provide a comprehensive tutorial on the fundamentals, architectures, and applications of RA-empowered wireless networks. Specifically, we begin by reviewing the historical evolution of RA-related technologies and clarifying the distinctive role of RA among flexible antenna architectures. Then, we establish a unified mathematical framework for RA-enabled systems, including general antenna/array rotation models, as well as channel models that cover near- and far-field propagation characteristics, wideband frequency selectivity, and polarization effects. Building upon this foundation, we investigate antenna/array rotation optimization in representative communication and sensing scenarios. Furthermore, we examine RA channel estimation/acquisition strategies encompassing orientation scheduling mechanisms and signal processing methods that exploit multi-view channel observations. Beyond theoretical modeling and algorithmic design, we discuss practical RA configurations and deployment strategies. We also present recent RA prototypes and experimental results that validate the practical performance gains enabled by antenna rotation. Finally, we highlight promising extensions of RA to emerging wireless paradigms and outline open challenges to inspire future research.

Qiyao Wang, Beixiong Zheng, Xue Xiong et al.

In the evolving landscape of mobile edge computing (MEC), enhancing communication reliability and computation efficiency to support increasingly stringent low-latency services remains a fundamental challenge. Rotatable antenna (RA) is a promising technology that introduces new spatial degrees of freedom (DoFs) to tackle this challenge. In this letter, we investigate an RA-enabled MEC system where antenna boresight directions can be independently adjusted to proactively improve wireless channel conditions for latency-critical users. We aim to minimize the maximum computation latency by jointly optimizing the MEC server computing resource allocation, receive beamforming, and the deflection angles of all RAs. To address the resulting non-convex problem, we develop an efficient alternating optimization (AO) framework. Specifically, the optimal edge computing resource allocation is derived based on the Karush-Kuhn-Tucker (KKT) conditions. Given the computing resources, the receive beamforming is optimized using semidefinite relaxation (SDR) combined with a bisection search. Furthermore, the RA deflection angles are optimized via fractional programming (FP) and successive convex approximation (SCA). Simulation results verify that the proposed RA-enabled MEC scheme significantly reduces the maximum computation latency compared with conventional benchmark methods.

Wenchao Liu, Xuhui Zhang, Jinke Ren et al.

Unmanned aerial vehicle (UAV)-enabled integrated sensing and communication (ISAC) is regarded as a key enabler for next-generation wireless systems. However, conventional fixed-position antennas limit the ability of UAVs to fully exploit their inherent potential. To overcome this limitation, we propose a UAV-enabled ISAC framework equipped with fluid antennas (FAs), where the mobility of antenna elements introduces additional spatial degrees of freedom to simultaneously enhance communication and sensing performance. A multi-objective optimization problem is formulated to maximize the communication rates of multiple users while minimizing the Cramér-Rao bound (CRB) for the angle estimation of a single target. Due to excessively frequent updates of FA positions may lead to response delay, a three-timescale optimization framework is developed to jointly optimize transmit beamforming, FA positions, and UAV trajectory based on their characteristics. To solve the non-convexity of the problem, an alternating optimization-based algorithm is developed to obtain a sub-optimal solution. Numerical results show that the proposed scheme significantly outperforms various benchmark schemes, validating the effectiveness of integrating the FA technology into the UAV-enabled ISAC systems.

Yiming Fang, Li Chen, Changsheng You et al.

The implementation of the conjugate gradient (CG) method for massive MIMO detection is computationally challenging, especially for a large number of users and correlated channels. In this paper, we propose a low computational complexity CG detection from a finite-precision perspective. First, we develop a finite-precision CG (FP-CG) detection to mitigate the computational bottleneck of each CG iteration and provide the attainable accuracy, convergence, and computational complexity analysis to reveal the impact of finite-precision arithmetic. A practical heuristic is presented to select suitable precisions. Then, to further reduce the number of iterations, we propose a joint finite-precision and block-Jacobi preconditioned CG (FP-BJ-CG) detection. The corresponding performance analysis is also provided. Finally, simulation results validate the theoretical insights and demonstrate the superiority of the proposed detection.

Jaehong Kim, Jihong Park, Changsheng You et al.

Multi-path sensing, which aims to extract the geometric attributes of multiple propagation paths, is expected to be a key functionality of 6G. A movable antenna (MA) can enable this functionality by creating a synthetic aperture through sequential mechanical motion. However, existing MA-based sensing methods typically rely on exhaustive scanning over the entire movable plate, resulting in significant control overhead and sensing latency, which limits their practicality for agile sensing. To address this challenge, this paper develops a prior-guided agile multi-path sensing framework that leverages weak prior angle-of-arrival (AoA) statistics as side information. The proposed framework comprises two steps. First, the movable plate's three-dimensional orientation is optimized only once to maximize path visibility while preserving path discriminability, both induced from Fisher information analysis. Second, only two predetermined linear MA scans are made on the tilted plate to estimate the elevation and azimuth AoAs from the resulting sequence of received signals. By incorporating the prior AoA statistics, a maximum a posteriori (MAP)-based AoA estimation algorithm is developed. With only one orientation control and two linear scans, the proposed framework enables agile multi-path sensing with significantly reduced control overhead and latency, while achieving AoA estimation accuracy approaching that of the single-path benchmark.

Liujia Yao, Changsheng You, Zixuan Huang et al.

In this paper, we study efficient codebook design for limited feedback in extremely large-scale multiple-input-multiple-output (XL-MIMO) frequency division duplexing (FDD) systems. It is worth noting that existing codebook designs for XL-MIMO, such as polar-domain codebook, have not well taken into account user (location) distribution in practice, thereby incurring excessive feedback overhead. To address this issue, we propose in this paper a novel and efficient feedback codebook tailored to user distribution. To this end, we first consider a typical scenario where users are uniformly distributed within a specific polar-region, based on which a sum-rate maximization problem is formulated to jointly optimize angle-range samples and bit allocation among angle/range feedback. This problem is challenging to solve due to the lack of a closed-form expression for the received power in terms of angle and range samples. By leveraging a Voronoi partitioning approach, we show that uniform angle sampling is optimal for received power maximization. For more challenging range sampling design, we obtain a tight lower-bound on the received power and show that geometric sampling, where the ratio between adjacent samples is constant, can maximize the lower bound and thus serves as a high-quality suboptimal solution. We then extend the proposed framework to accommodate more general non-uniform user distribution via an alternating sampling method. Furthermore, theoretical analysis reveals that as the array size increases, the optimal allocation of feedback bits increasingly favors range samples at the expense of angle samples. Finally, numerical results validate the superior rate performance and robustness of the proposed codebook design under various system setups, achieving significant gains over benchmark schemes, including the widely used polar-domain codebook.

Sijing Xie, Dingzhu Wen, Xiaonan Liu et al.

Federated Dropout is an efficient technique to overcome both communication and computation bottlenecks for deploying federated learning at the network edge. In each training round, an edge device only needs to update and transmit a sub-model, which is generated by the typical method of dropout in deep learning, and thus effectively reduces the per-round latency. \textcolor{blue}{However, the theoretical convergence analysis for Federated Dropout is still lacking in the literature, particularly regarding the quantitative influence of dropout rate on convergence}. To address this issue, by using the Taylor expansion method, we mathematically show that the gradient variance increases with a scaling factor of $γ/(1-γ)$, with $γ\in [0, θ)$ denoting the dropout rate and $θ$ being the maximum dropout rate ensuring the loss function reduction. Based on the above approximation, we provide the convergence analysis for Federated Dropout. Specifically, it is shown that a larger dropout rate of each device leads to a slower convergence rate. This provides a theoretical foundation for reducing the convergence latency by making a tradeoff between the per-round latency and the overall rounds till convergence. Moreover, a low-complexity algorithm is proposed to jointly optimize the dropout rate and the bandwidth allocation for minimizing the loss function in all rounds under a given per-round latency and limited network resources. Finally, numerical results are provided to verify the effectiveness of the proposed algorithm.

You Zhou, Changsheng You, Kaibin Huang

Rare events, despite their infrequency, often carry critical information and require immediate attentions in mission-critical applications such as autonomous driving, healthcare, and industrial automation. The data-intensive nature of these tasks and their need for prompt responses, combined with designing edge AI (or edge inference), pose significant challenges in systems and techniques. Existing edge inference approaches often suffer from communication bottlenecks due to high-dimensional data transmission and fail to provide timely responses to rare events, limiting their effectiveness for mission-critical applications in the sixth-generation (6G) mobile networks. To overcome these challenges, we propose a channel-adaptive, event-triggered edge-inference framework that prioritizes efficient rare-event processing. Central to this framework is a dual-threshold, multi-exit architecture, which enables early local inference for rare events detected locally while offloading more complex rare events to edge servers for detailed classification. To further enhance the system's performance, we developed a channel-adaptive offloading policy paired with an online algorithm to dynamically determine the optimal confidence thresholds for controlling offloading decisions. The associated optimization problem is solved by reformulating the original non-convex function into an equivalent strongly convex one. Using deep neural network classifiers and real medical datasets, our experiments demonstrate that the proposed framework not only achieves superior rare-event classification accuracy, but also effectively reduces communication overhead, as opposed to existing edge-inference approaches.

Ji Luo, Yaxuan Chen, Guangchi Zhang et al.

Enhancing user fairness in advanced multi-user systems like two-layer rate-splitting multiple access (RSMA) is a critical yet challenging task. This letter proposes a novel movable antenna (MA) approach to address this challenge. We formulate a max-min fairness problem, maximizing the minimum user rate, a key metric for fairness, through the joint optimization of the beamforming matrices, user clustering, common rate allocation, and the antenna position vector (APV). To solve this non-convex problem, we develop an efficient two-loop iterative algorithm. The outer-loop leverages the dynamic neighborhood pruning particle swarm optimization method to find a high-quality APV, while the inner-loop optimizes the remaining variables for a given APV. Simulation results validate our approach, demonstrating that the proposed scheme yields significant fairness gains over various benchmark schemes.

Sijing Xie, Dingzhu Wen, Changsheng You et al.

Fine-tuning (FT) large language models (LLMs) is crucial for adapting general-purpose models to specific tasks, enhancing accuracy and relevance with minimal resources. To further enhance generalization ability while reducing training costs, this paper proposes Federated LoRA with Dropout (FedLoDrop), a new framework that applies dropout to the rows and columns of the trainable matrix in Federated LoRA. A generalization error bound and convergence analysis under sparsity regularization are obtained, which elucidate the fundamental trade-off between underfitting and overfitting. The error bound reveals that a higher dropout rate increases model sparsity, thereby lowering the upper bound of pointwise hypothesis stability (PHS). While this reduces the gap between empirical and generalization errors, it also incurs a higher empirical error, which, together with the gap, determines the overall generalization error. On the other hand, though dropout reduces communication costs, deploying FedLoDrop at the network edge still faces challenges due to limited network resources. To address this issue, an optimization problem is formulated to minimize the upper bound of the generalization error, by jointly optimizing the dropout rate and resource allocation subject to the latency and per-device energy consumption constraints. To solve this problem, a branch-and-bound (B\&B)-based method is proposed to obtain its globally optimal solution. Moreover, to reduce the high computational complexity of the B\&B-based method, a penalized successive convex approximation (P-SCA)-based algorithm is proposed to efficiently obtain its high-quality suboptimal solution. Finally, numerical results demonstrate the effectiveness of the proposed approach in mitigating overfitting and improving the generalization capability.

Abu Sufian, Changsheng You, Mianxiong Dong

The health-care gets huge stress in a pandemic or epidemic situation. Some diseases such as COVID-19 that causes a pandemic is highly spreadable from an infected person to others. Therefore, providing health services at home for non-critical infected patients with isolation shall assist to mitigate this kind of stress. In addition, this practice is also very useful for monitoring the health-related activities of elders who live at home. The home health monitoring, a continuous monitoring of a patient or elder at home using visual sensors is one such non-intrusive sub-area of health services at home. In this article, we propose a transfer learning-based edge computing method for home health monitoring. Specifically, a pre-trained convolutional neural network-based model can leverage edge devices with a small amount of ground-labeled data and fine-tuning method to train the model. Therefore, on-site computing of visual data captured by RGB, depth, or thermal sensor could be possible in an affordable way. As a result, raw data captured by these types of sensors is not required to be sent outside from home. Therefore, privacy, security, and bandwidth scarcity shall not be issues. Moreover, real-time computing for the above-mentioned purposes shall be possible in an economical way.

Xiao-Wei Tang, Shuowen Zhang, Changsheng You et al.

In this paper, we consider a new unmanned aerial vehicle (UAV)-assisted oblique image acquisition system where a UAV is dispatched to take images of multiple ground targets (GTs). To study the three-dimensional (3D) UAV trajectory design for image acquisition, we first propose a novel UAV-assisted oblique photography model, which characterizes the image resolution with respect to the UAV's 3D image-taking location. Then, we formulate a 3D UAV trajectory optimization problem to minimize the UAV's traveling distance subject to the image resolution constraints. The formulated problem is shown to be equivalent to a modified 3D traveling salesman problem with neighbourhoods, which is NP-hard in general. To tackle this difficult problem, we propose an iterative algorithm to obtain a high-quality suboptimal solution efficiently, by alternately optimizing the UAV's 3D image-taking waypoints and its visiting order for the GTs. Numerical results show that the proposed algorithm significantly reduces the UAV's traveling distance as compared to various benchmark schemes, while meeting the image resolution requirement.

Yijun Guo, Changsheng You, Changchuan Yin et al.

The performance optimization of UAV communication systems requires the joint design of UAV trajectory and communication efficiently. To tackle the challenge of infinite design variables arising from the continuous-time UAV trajectory optimization, a commonly adopted approach is by approximating the UAV trajectory with piecewise-linear path segments in three-dimensional (3D) space. However, this approach may still incur prohibitive computational complexity in practice when the UAV flight period/distance becomes long, as the distance between consecutive waypoints needs to be kept sufficiently small to retain high approximation accuracy. To resolve this fundamental issue, we propose in this paper a new and general framework for UAV trajectory and communication co-design. First, we propose a flexible path discretization scheme that optimizes only a number of selected waypoints (designable waypoints) along the UAV path for complexity reduction, while all the designable and non-designable waypoints are used in calculating the approximated communication utility along the UAV trajectory for ensuring high trajectory discretization accuracy. Next, given any number of designable waypoints, we propose a novel path compression scheme where the UAV 3D path is first decomposed into three one-dimensional (1D) sub-paths and each sub-path is then approximated by superimposing a number of selected basis paths weighted by their corresponding path coefficients, thus further reducing the path design complexity. Finally, we provide a case study on UAV trajectory design for aerial data harvesting from distributed ground sensors, and numerically show that the proposed schemes can significantly reduce the UAV trajectory design complexity yet achieve favorable rate performance as compared to conventional path/time discretization schemes.

Qingqing Wu, Shuowen Zhang, Beixiong Zheng et al.

Intelligent reflecting surface (IRS) is an enabling technology to engineer the radio signal prorogation in wireless networks. By smartly tuning the signal reflection via a large number of low-cost passive reflecting elements, IRS is capable of dynamically altering wireless channels to enhance the communication performance. It is thus expected that the new IRS-aided hybrid wireless network comprising both active and passive components will be highly promising to achieve a sustainable capacity growth cost-effectively in the future. Despite its great potential, IRS faces new challenges to be efficiently integrated into wireless networks, such as reflection optimization, channel estimation, and deployment from communication design perspectives. In this paper, we provide a tutorial overview of IRS-aided wireless communication to address the above issues, and elaborate its reflection and channel models, hardware architecture and practical constraints, as well as various appealing applications in wireless networks. Moreover, we highlight important directions worthy of further investigation in future work.

Guangxu Zhu, Dongzhu Liu, Yuqing Du et al.

The recent revival of artificial intelligence (AI) is revolutionizing almost every branch of science and technology. Given the ubiquitous smart mobile gadgets and Internet of Things (IoT) devices, it is expected that a majority of intelligent applications will be deployed at the edge of wireless networks. This trend has generated strong interests in realizing an "intelligent edge" to support AI-enabled applications at various edge devices. Accordingly, a new research area, called edge learning, emerges, which crosses and revolutionizes two disciplines: wireless communication and machine learning. A major theme in edge learning is to overcome the limited computing power, as well as limited data, at each edge device. This is accomplished by leveraging the mobile edge computing (MEC) platform and exploiting the massive data distributed over a large number of edge devices. In such systems, learning from distributed data and communicating between the edge server and devices are two critical and coupled aspects, and their fusion poses many new research challenges. This article advocates a new set of design principles for wireless communication in edge learning, collectively called learning-driven communication. Illustrative examples are provided to demonstrate the effectiveness of these design principles, and unique research opportunities are identified.