SYMay 10, 2017
Online Calibration of Phasor Measurement Unit Using Density-Based Spatial ClusteringXinan Wang, Di Shi, Zhiwei Wang et al.
Data quality of Phasor Measurement Unit (PMU) is receiving increasing attention as it has been identified as one of the limiting factors that affect many wide-area measurement system (WAMS) based applications. In general, existing PMU calibration methods include offline testing and model based approaches. However, in practice, the effectiveness of both is limited due to the very strong assumptions employed. This paper presents a novel framework for online bias error detection and calibration of PMU measurement using density-based spatial clustering of applications with noise (DBSCAN) based on much relaxed assumptions. With a new problem formulation, the proposed data mining based methodology is applicable across a wide spectrum of practical conditions and one side-product of it is more accurate transmission line parameters for EMS database and protective relay settings. Case studies demonstrate the effectiveness of the proposed approach.
SPApr 24, 2024
Soil analysis with machine-learning-based processing of stepped-frequency GPR field measurements: Preliminary studyChunlei Xu, Michael Pregesbauer, Naga Sravani Chilukuri et al.
Ground Penetrating Radar (GPR) has been widely studied as a tool for extracting soil parameters relevant to agriculture and horticulture. When combined with Machine Learning (ML) methods, air-coupled Stepped Frequency Continuous Wave Ground Penetrating Radar (SFCW GPR) measurements could offer a cost-effective way to obtain depth-resolved soil data. As a first step of our study in this direction, we conducted an extensive field survey using a tractor-mounted air-coupled SFCW GPR instrument. Leveraging ML-based data processing, we evaluate the GPR instrument's ability by predicting the apparent electrical conductivity (ECaR) measured by a co-recorded Electromagnetic Induction (EMI) instrument. The large-scale field measurement campaign with 3472 co-registered and geo-located GPR and EMI data samples distributed over approximately 6600 square meters was performed on a golf course. This terrain offers high surface homogeneity but also presents the challenge of subtle soil parameter variations. Based on the results, we discuss challenges in this multi-sensor regression setting and propose the use of the nugget-to-sill ratio as a performance metric for evaluating ML models in agricultural field survey applications.
CVJul 26, 2021
A Transductive Maximum Margin Classifier for Few-Shot LearningFei Pan, Chunlei Xu, Jie Guo et al.
Few-shot learning aims to train a classifier that can generalize well when just a small number of labeled examples per class are given. We introduce a transductive maximum margin classifier for few-shot learning (FS-TMMC). The basic idea of the classical maximum margin classifier is to solve an optimal prediction function so that the training data can be correctly classified by the resulting classifer with the largest geometric margin. In few-shot learning, it is challenging to find such classifiers with good generalization ability due to the insufficiency of training data in the support set. FS-TMMC leverages the unlabeled query examples to adjust the separating hyperplane of the maximum margin classifier such that the prediction function is optimal on both the support and query sets. Furthermore, we use an efficient and effective quasi-Newton algorithm, the L-BFGS method for optimization. Experimental results on three standard few-shot learning benchmarks including miniImagenet, tieredImagenet and CUB show that our method achieves state-of-the-art performance.
CVJul 26, 2021
Temporal Alignment Prediction for Few-Shot Video ClassificationFei Pan, Chunlei Xu, Jie Guo et al.
The goal of few-shot video classification is to learn a classification model with good generalization ability when trained with only a few labeled videos. However, it is difficult to learn discriminative feature representations for videos in such a setting. In this paper, we propose Temporal Alignment Prediction (TAP) based on sequence similarity learning for few-shot video classification. In order to obtain the similarity of a pair of videos, we predict the alignment scores between all pairs of temporal positions in the two videos with the temporal alignment prediction function. Besides, the inputs to this function are also equipped with the context information in the temporal domain. We evaluate TAP on two video classification benchmarks including Kinetics and Something-Something V2. The experimental results verify the effectiveness of TAP and show its superiority over state-of-the-art methods.
SYAug 24, 2017
Online Coherence Identification Using Dynamic Time Warping for Controlled IslandingHasan Ul Banna, Zhe Yu, Di Shi et al.
Controlled islanding is considered to be the last countermeasure to prevent system-wide blackouts in case of cascading failures. It splits the system into self-sustained islands to maintain transient stability at the expense of possible loss of load. Generator coherence identification is critical to controlled islanding scheme as it helps identify the optimal cut-set to maintain system transient stability. This paper presents a novel approach for online generator coherency identification using phasor measurement unit (PMU) data and dynamic time warping (DTW). Results from the coherence identification are used to further cluster non-generator buses using spectral clustering with the objective of minimizing power flow disruption. The proposed approach is validated and compared to existing methods on the IEEE 39-bus system, through which its advantages are demonstrated.
SYJun 14, 2017
PMU Assisted Power System Parameter Calibration at Jiangsu Electric Power CompanyXiao Lu, Di Shi, Bin Zhu et al.
An online PMU-assisted Power System Parameter Calibration System (PSPCS) was recently developed and implemented at State Grid Jiangsu Electric Power Company (JEPC). PSPCS leverages high-resolution PMU data and data mining techniques to perform online screening of the EMS and Production Management System (PMS) databases for data cleaning, model validation, and parameter calibration. PSPCS calculates transmission line and generator parameters on a regular real-time basis and compares the results with databases to identify record(s) with significant discrepancy, if any. Once consistent discrepancy is observed, the system will raise a flag and further investigation will be initiated, including a novel density-based spatial clustering procedure for parameter/data calibration. A novel metric is proposed to quantify the credibility of PMU-based parameter identification. This paper discusses the proposed methodologies, challenges, as well as implementation issues identified during the development and deployment of PSPCS.