Namhoon Kim

Gyujun Jeong, Sungwon Cho, Minji Shon et al.

Ferroelectric field-effect transistors (FeFET)-based vertical NAND (Fe-VNAND) has emerged as a promising candidate to overcome z-scaling limitations with lower programming voltages. However, the data retention of 3D Fe-VNAND is hindered by the complex interaction between charge detrapping and ferroelectric depolarization. Developing optimized device designs requires exploring an extensive parameter space, but the high computational cost of conventional Technology Computer-Aided Design (TCAD) tools makes such wide-scale optimization impractical. To overcome these simulation barriers, we present a Physics-Informed Neural Operator (PINO)-based AI surrogate model designed for high-efficiency prediction of threshold voltage (Vth) shifts and retention behavior. By embedding fundamental physical principles into the learning architecture, our PINO framework achieves a speedup exceeding 10000x compared to TCAD while maintaining physical accuracy. This study demonstrates the model's effectiveness on a single FeFET configuration, serving as a pathway toward modeling the retention loss mechanisms.

Namhoon Kim, Narges Moeini, Justin Romberg et al.

Volume denoising is a foundational problem in computational imaging, as many 3D imaging inverse problems face high levels of measurement noise. Inspired by the strong 2D image denoising properties of Field of Junctions (ICCV 2021), we propose a novel, fully volumetric 3D Field of Junctions (3D FoJ) representation that optimizes a junction of 3D wedges that best explain each 3D patch of a full volume, while encouraging consistency between overlapping patches. In addition to direct volume denoising, we leverage our 3D FoJ representation as a structural prior that: (i) requires no training data, and thus precludes the risk of hallucination, (ii) preserves and enhances sharp edge and corner structures in 3D, even under low signal to noise ratio (SNR), and (iii) can be used as a drop-in denoising representation via projected or proximal gradient descent for any volumetric inverse problem with low SNR. We demonstrate successful volume reconstruction and denoising with 3D FoJ across three diverse 3D imaging tasks with low-SNR measurements: low-dose X-ray computed tomography (CT), cryogenic electron tomography (cryo-ET), and denoising point clouds such as those from lidar in adverse weather. Across these challenging low-SNR volumetric imaging problems, 3D FoJ outperforms a mixture of classical and neural methods.

Namhoon Kim, Ashwin Pananjady, Amir Pourmorteza et al.

Background: Perfusion computed tomography (CT) images the dynamics of a contrast agent through the body over time, and is one of the highest X-ray dose scans in medical imaging. Recently, a theoretically justified reconstruction algorithm based on a monotone variational inequality (VI) was proposed for single material polychromatic photon-counting CT, and showed promising early results at low-dose imaging. Purpose: We adapt this reconstruction algorithm for perfusion CT, to reconstruct the concentration map of the contrast agent while the static background tissue is assumed known; we call our method VI-PRISM (VI-based PeRfusion Imaging and Single Material reconstruction). We evaluate its potential for dose-reduced perfusion CT, using a digital phantom with water and iodine of varying concentration. Methods: Simulated iodine concentrations range from 0.05 to 2.5 mg/ml. The simulated X-ray source emits photons up to 100 keV, with average intensity ranging from $10^5$ down to $10^2$ photons per detector element. The number of tomographic projections was varied from 984 down to 8 to characterize the tradeoff in photon allocation between views and intensity. Results: We compare VI-PRISM against filtered back-projection (FBP), and find that VI-PRISM recovers iodine concentration with error below 0.4 mg/ml at all source intensity levels tested. Even with a dose reduction between 10x and 100x compared to FBP, VI-PRISM exhibits reconstruction quality on par with FBP. Conclusion: Across all photon budgets and angular sampling densities tested, VI-PRISM achieved consistently lower RMSE, reduced noise, and higher SNR compared to filtered back-projection. Even in extremely photon-limited and sparsely sampled regimes, VI-PRISM recovered iodine concentrations with errors below 0.4 mg/ml, showing that VI-PRISM can support accurate and dose-efficient perfusion imaging in photon-counting CT.

Namhoon Kim, Sara Fridovich-Keil

Generative models have shown strong potential as data-driven priors for solving inverse problems such as reconstructing medical images from undersampled measurements. While these priors improve reconstruction quality with fewer measurements, they risk hallucinating features when test images lie outside the training distribution. Existing uncertainty quantification methods in this setting (i) require an in-distribution calibration dataset, which may not be available, (ii) provide heuristic rather than statistical estimates, or (iii) quantify uncertainty from model capacity or limited measurements rather than distribution shift. We propose an instance-level, calibration-free uncertainty indicator that is sensitive to distribution shift, requires no knowledge of the training distribution, and incurs no retraining cost. Our key hypothesis is that reconstructions of in-distribution images remain stable under random measurement variations, while reconstructions of out-of-distribution (OOD) images exhibit greater instability. We use this stability as a proxy for detecting distribution shift. Our proposed OOD indicator is efficiently computable for any computational imaging inverse problem; we demonstrate it on tomographic reconstruction of MNIST digits, where a learned proximal network trained only on digit "0" is evaluated on all ten digits. Reconstructions of OOD digits show higher variability and correspondingly higher reconstruction error, validating this indicator. These results suggest a deployment strategy that pairs generative priors with lightweight guardrails, enabling aggressive measurement reduction for in-distribution cases while automatically warning when priors are applied out of distribution.

Namhoon Kim, Sara Fridovich-Keil

Implicit Neural Representations (INRs) have recently shown impressive results, but their fundamental capacity, implicit biases, and scaling behavior remain poorly understood. We investigate the performance of diverse INRs across a suite of 2D and 3D real and synthetic signals with varying effective bandwidth, as well as both overfitting and generalization tasks including tomography, super-resolution, and denoising. By stratifying performance according to model size as well as signal type and bandwidth, our results shed light on how different INR and grid representations allocate their capacity. We find that, for most tasks and signals, a simple regularized grid with interpolation trains faster and to higher quality than any INR with the same number of parameters. We also find limited settings--namely fitting binary signals such as shape contours--where INRs outperform grids, to guide future development and use of INRs towards the most advantageous applications.

Michael Jaemin Kim, Jaehyun Park, Yeonhong Park et al.

Since its public introduction in the mid-2010s, the Row Hammer (RH) phenomenon has drawn significant attention from the research community due to its security implications. Although many RH-protection schemes have been proposed by processor vendors, DRAM manufacturers, and academia, they still have shortcomings. Solutions implemented in the memory controller (MC) incur increasingly higher costs due to their conservative design for the worst case in terms of the number of DRAM banks and RH threshold to support. Meanwhile, DRAM-side implementation either has a limited time margin for RH-protection measures or requires extensive modifications to the standard DRAM interface. Recently, a new command for RH-protection has been introduced in the DDR5/LPDDR5 standards, referred to as refresh management (RFM). RFM enables the separation of the tasks for RHprotection to both MC and DRAM by having the former generate an RFM command at a specific activation frequency and the latter take proper RH-protection measures within a given time window. Although promising, no existing study presents and analyzes RFM-based solutions for RH-protection. In this paper, we propose Mithril, the first RFM interfacecompatible, DRAM-MC cooperative RH-protection scheme providing deterministic protection guarantees. Mithril has minimal energy overheads for common use cases without adversarial memory access patterns. We also introduce Mithril+, an optional extension to provide minimal performance overheads at the expense of a tiny modification to the MC, while utilizing existing DRAM commands.

Kyungmin Lee, Chiyoun Park, Ilhwan Kim et al.

Recurrent Neural Network Language Models (RNNLMs) have started to be used in various fields of speech recognition due to their outstanding performance. However, the high computational complexity of RNNLMs has been a hurdle in applying the RNNLM to a real-time Large Vocabulary Continuous Speech Recognition (LVCSR). In order to accelerate the speed of RNNLM-based network searches during decoding, we apply the General Purpose Graphic Processing Units (GPGPUs). This paper proposes a novel method of applying GPGPUs to RNNLM-based graph traversals. We have achieved our goal by reducing redundant computations on CPUs and amount of transfer between GPGPUs and CPUs. The proposed approach was evaluated on both WSJ corpus and in-house data. Experiments shows that the proposed approach achieves the real-time speed in various circumstances while maintaining the Word Error Rate (WER) to be relatively 10% lower than that of n-gram models.

Kyungmin Lee, Chiyoun Park, Namhoon Kim et al.

This paper presents methods to accelerate recurrent neural network based language models (RNNLMs) for online speech recognition systems. Firstly, a lossy compression of the past hidden layer outputs (history vector) with caching is introduced in order to reduce the number of LM queries. Next, RNNLM computations are deployed in a CPU-GPU hybrid manner, which computes each layer of the model on a more advantageous platform. The added overhead by data exchanges between CPU and GPU is compensated through a frame-wise batching strategy. The performance of the proposed methods evaluated on LibriSpeech test sets indicates that the reduction in history vector precision improves the average recognition speed by 1.23 times with minimum degradation in accuracy. On the other hand, the CPU-GPU hybrid parallelization enables RNNLM based real-time recognition with a four times improvement in speed.