Limin Yu

Shuyue Li, Miguel López-Benítez, Eng Gee Lim et al.

The reliable operation of Unmanned Underwater Vehicle (UUV) clusters is highly dependent on continuous acoustic communication. However, this communication method is highly susceptible to intermittent interruptions. When communication outages occur, standard state estimators such as the Unscented Kalman Filter (UKF) will be forced to make open-loop predictions. If the environment contains unmodeled dynamic factors, such as unknown ocean currents, this estimation error will grow rapidly, which may eventually lead to mission failure. To address this critical issue, this paper proposes a Variational History Distillation (VHD) approach. VHD regards trajectory prediction as an approximate Bayesian reasoning process, which links a standard motion model based on physics with a pattern extracted directly from the past trajectory of the UUV. This is achieved by synthesizing ``virtual measurements'' distilled from historical trajectories. Recognizing that the reliability of extrapolated historical trends degrades over extended prediction horizons, an adaptive confidence mechanism is introduced. This mechanism allows the filter to gradually reduce the trust of virtual measurements as the communication outage time is extended. Extensive Monte Carlo simulations in a high-fidelity environment demonstrate that the proposed method achieves a 91\% reduction in prediction Root Mean Square Error (RMSE), reducing the error from approximately 170 m to 15 m during a 40-second communication outage. These results demonstrate that VHD can maintain robust state estimation performance even under complete communication loss.

Shuyue Li, Miguel López-Benítez, Eng Gee Lim et al.

In GNSS-denied underwater environments, individual unmanned underwater vehicles (UUVs) suffer from unbounded dead-reckoning drift, making collaborative navigation crucial for accurate state estimation. However, the severe communication delay inherent in underwater acoustic channels poses serious challenges to real-time state estimation. Traditional filters, such as Extended Kalman Filters (EKF) or Unscented Kalman Filters (UKF), usually block the main control loop while waiting for delayed data, or completely discard Out-of-Sequence Measurements (OOSM), resulting in serious drift. To address this, we propose an Asynchronous Two-Speed Kalman Filter (TSKF) enhanced by a novel projection mechanism, which we term Variational History Distillation (VHD). The proposed architecture decouples the estimation process into two parallel threads: a fast-rate thread that utilizes Gaussian Process (GP) compensated dead reckoning to guarantee high-frequency real-time control, and a slow-rate thread dedicated to processing asynchronously delayed collaborative information. By introducing a finite-length State Buffer, the algorithm applies delayed measurements (t-T) to their corresponding historical states, and utilizes a VHD-based projection to fast-forward the correction to the current time without computationally heavy recalculations. Simulation results demonstrate that the proposed TSKF maintains trajectory Root Mean Square Error (RMSE) comparable to computationally intensive batch-optimization methods under severe delays (up to 30 s). Executing in sub-millisecond time, it significantly outperforms standard EKF/UKF. The results demonstrate an effective control, communication, and computing (3C) co-design that significantly enhances the resilience of autonomous marine automation systems.

Runwei Guan, Haocheng Zhao, Shanliang Yao et al.

Urban water-surface robust perception serves as the foundation for intelligent monitoring of aquatic environments and the autonomous navigation and operation of unmanned vessels, especially in the context of waterway safety. It is worth noting that current multi-sensor fusion and multi-task learning models consume substantial power and heavily rely on high-power GPUs for inference. This contributes to increased carbon emissions, a concern that runs counter to the prevailing emphasis on environmental preservation and the pursuit of sustainable, low-carbon urban environments. In light of these concerns, this paper concentrates on low-power, lightweight, multi-task panoptic perception through the fusion of visual and 4D radar data, which is seen as a promising low-cost perception method. We propose a framework named Achelous++ that facilitates the development and comprehensive evaluation of multi-task water-surface panoptic perception models. Achelous++ can simultaneously execute five perception tasks with high speed and low power consumption, including object detection, object semantic segmentation, drivable-area segmentation, waterline segmentation, and radar point cloud semantic segmentation. Furthermore, to meet the demand for developers to customize models for real-time inference on low-performance devices, a novel multi-modal pruning strategy known as Heterogeneous-Aware SynFlow (HA-SynFlow) is proposed. Besides, Achelous++ also supports random pruning at initialization with different layer-wise sparsity, such as Uniform and Erdos-Renyi-Kernel (ERK). Overall, our Achelous++ framework achieves state-of-the-art performance on the WaterScenes benchmark, excelling in both accuracy and power efficiency compared to other single-task and multi-task models. We release and maintain the code at https://github.com/GuanRunwei/Achelous.

Dinkar Juyal, Harshith Padigela, Chintan Shah et al.

Pathology is the study of microscopic inspection of tissue, and a pathology diagnosis is often the medical gold standard to diagnose disease. Pathology images provide a unique challenge for computer-vision-based analysis: a single pathology Whole Slide Image (WSI) is gigapixel-sized and often contains hundreds of thousands to millions of objects of interest across multiple resolutions. In this work, we propose PathoLogy Universal TransfOrmer (PLUTO): a light-weight pathology FM that is pre-trained on a diverse dataset of 195 million image tiles collected from multiple sites and extracts meaningful representations across multiple WSI scales that enable a large variety of downstream pathology tasks. In particular, we design task-specific adaptation heads that utilize PLUTO's output embeddings for tasks which span pathology scales ranging from subcellular to slide-scale, including instance segmentation, tile classification, and slide-level prediction. We compare PLUTO's performance to other state-of-the-art methods on a diverse set of external and internal benchmarks covering multiple biologically relevant tasks, tissue types, resolutions, stains, and scanners. We find that PLUTO matches or outperforms existing task-specific baselines and pathology-specific foundation models, some of which use orders-of-magnitude larger datasets and model sizes when compared to PLUTO. Our findings present a path towards a universal embedding to power pathology image analysis, and motivate further exploration around pathology foundation models in terms of data diversity, architectural improvements, sample efficiency, and practical deployability in real-world applications.