Lin Lu

Huizi Yu, Jiayan Zhou, Lingyao Li et al. · harvard

Background: Simulated patient systems are important in medical education and research, providing safe, integrative training environments and supporting clinical decision making. Advances in artificial intelligence (AI), especially large language models (LLMs), can enhance simulated patients by replicating medical conditions and doctor patient interactions with high fidelity and at low cost, but effectiveness and trustworthiness remain open challenges. Methods: We developed AIPatient, a simulated patient system powered by LLM based AI agents. The system uses a retrieval augmented generation (RAG) framework with six task specific agents for complex reasoning. To improve realism, it is linked to the AIPatient knowledge graph built from de identified real patient data in the MIMIC III intensive care database. Results: We evaluated electronic health record (EHR) based medical question answering (QA), readability, robustness, stability, and user experience. AIPatient reached 94.15 percent QA accuracy when all six agents were enabled, outperforming versions with partial or no agent integration. The knowledge base achieved an F1 score of 0.89. Readability scores showed a median Flesch Reading Ease of 68.77 and a median Flesch Kincaid Grade of 6.4, indicating accessibility for most medical trainees and clinicians. Robustness and stability were supported by non significant variance in repeated trials (analysis of variance F value 0.61, p greater than 0.1; F value 0.78, p greater than 0.1). A user study with medical students showed that AIPatient provides high fidelity, usability, and educational value, comparable to or better than human simulated patients for history taking. Conclusions: LLM based simulated patient systems can deliver accurate, readable, and reliable medical encounters and show strong potential to transform medical education.

Tobi Michael Alabi, Nathan P. Lawrence, Lin Lu et al.

The carbon-capturing process with the aid of CO2 removal technology (CDRT) has been recognised as an alternative and a prominent approach to deep decarbonisation. However, the main hindrance is the enormous energy demand and the economic implication of CDRT if not effectively managed. Hence, a novel deep reinforcement learning agent (DRL), integrated with an automated hyperparameter selection feature, is proposed in this study for the real-time scheduling of a multi-energy system coupled with CDRT. Post-carbon capture systems (PCCS) and direct-air capture systems (DACS) are considered CDRT. Various possible configurations are evaluated using real-time multi-energy data of a district in Arizona and CDRT parameters from manufacturers' catalogues and pilot project documentation. The simulation results validate that an optimised soft-actor critic (SAC) algorithm outperformed the TD3 algorithm due to its maximum entropy feature. We then trained four (4) SAC agents, equivalent to the number of considered case studies, using optimised hyperparameter values and deployed them in real time for evaluation. The results show that the proposed DRL agent can meet the prosumers' multi-energy demand and schedule the CDRT energy demand economically without specified constraints violation. Also, the proposed DRL agent outperformed rule-based scheduling by 23.65%. However, the configuration with PCCS and solid-sorbent DACS is considered the most suitable configuration with a high CO2 captured-released ratio of 38.54, low CO2 released indicator value of 2.53, and a 36.5% reduction in CDR cost due to waste heat utilisation and high absorption capacity of the selected sorbent. However, the adoption of CDRT is not economically viable at the current carbon price. Finally, we showed that CDRT would be attractive at a carbon price of 400-450USD/ton with the provision of tax incentives by the policymakers.

Xinxin Lin, Guangxin Dai, Yi Zhong et al.

Large language models (LLMs) hold transformative potential for medical decision support yet their application in psychiatry remains constrained by hallucinations and superficial reasoning. This limitation is particularly acute in light-parameter LLMs which are essential for privacy-preserving and efficient clinical deployment. Existing training paradigms prioritize linguistic fluency over structured clinical logic and result in a fundamental misalignment with professional diagnostic cognition. Here we introduce ClinMPO, a reinforcement learning framework designed to align the internal reasoning of LLMs with professional psychiatric practice. The framework employs a specialized reward model trained independently on a dataset derived from 4,474 psychiatry journal articles and structured according to evidence-based medicine principles. We evaluated ClinMPO on a unseen subset of the benchmark designed to isolate reasoning capabilities from rote memorization. This test set comprises items where leading large-parameter LLMs consistently fail. We compared the ClinMPO-aligned light LLM performance against a cohort of 300 medical students. The ClinMPO-tuned Qwen3-8B model achieved a diagnostic accuracy of 31.4% and surpassed the human benchmark of 30.8% on these complex cases. These results demonstrate that medical evidence-guided optimization enables light-parameter LLMs to master complex reasoning tasks. Our findings suggest that explicit cognitive alignment offers a scalable pathway to reliable and safe psychiatric decision support.

Tianyang Xue, Mingdong Wu, Lin Lu et al.

The packing problem, also known as cutting or nesting, has diverse applications in logistics, manufacturing, layout design, and atlas generation. It involves arranging irregularly shaped pieces to minimize waste while avoiding overlap. Recent advances in machine learning, particularly reinforcement learning, have shown promise in addressing the packing problem. In this work, we delve deeper into a novel machine learning-based approach that formulates the packing problem as conditional generative modeling. To tackle the challenges of irregular packing, including object validity constraints and collision avoidance, our method employs the score-based diffusion model to learn a series of gradient fields. These gradient fields encode the correlations between constraint satisfaction and the spatial relationships of polygons, learned from teacher examples. During the testing phase, packing solutions are generated using a coarse-to-fine refinement mechanism guided by the learned gradient fields. To enhance packing feasibility and optimality, we introduce two key architectural designs: multi-scale feature extraction and coarse-to-fine relation extraction. We conduct experiments on two typical industrial packing domains, considering translations only. Empirically, our approach demonstrates spatial utilization rates comparable to, or even surpassing, those achieved by the teacher algorithm responsible for training data generation. Additionally, it exhibits some level of generalization to shape variations. We are hopeful that this method could pave the way for new possibilities in solving the packing problem.

Li Zhu, Jiawei Jiang, Lin Lu et al.

Multimodal magnetic resonance imaging (MRI) can reveal different patterns of human tissue and is crucial for clinical diagnosis. However, limited by cost, noise and manual labeling, obtaining diverse and reliable multimodal MR images remains a challenge. For the same lesion, different MRI manifestations have great differences in background information, coarse positioning and fine structure. In order to obtain better generation and segmentation performance, a coordination-spatial attention generation adversarial network (CASP-GAN) based on the cycle-consistent generative adversarial network (CycleGAN) is proposed. The performance of the generator is optimized by introducing the Coordinate Attention (CA) module and the Spatial Attention (SA) module. The two modules can make full use of the captured location information, accurately locating the interested region, and enhancing the generator model network structure. The ability to extract the structure information and the detailed information of the original medical image can help generate the desired image with higher quality. There exist some problems in the original CycleGAN that the training time is long, the parameter amount is too large, and it is difficult to converge. In response to this problem, we introduce the Coordinate Attention (CA) module to replace the Res Block to reduce the number of parameters, and cooperate with the spatial information extraction network above to strengthen the information extraction ability. On the basis of CASP-GAN, an attentional generative cross-modality segmentation (AGCMS) method is further proposed. This method inputs the modalities generated by CASP-GAN and the real modalities into the segmentation network for brain tumor segmentation. Experimental results show that CASP-GAN outperforms CycleGAN and some state-of-the-art methods in PSNR, SSMI and RMSE in most tasks.

Zhenyuan Zhao, Yu Xing, Tianyang Xue et al.

Designing microstructures that satisfy coupled cross-physics objectives is a fundamental challenge in material science. This inverse design problem involves a vast, discontinuous search space where traditional topology optimization is computationally prohibitive, and deep generative models often suffer from "physical hallucinations," lacking the capability to ensure rigorous validity. To address this limitation, we introduce AutoMS, a multi-agent neuro-symbolic framework that reformulates inverse design as an LLM-driven evolutionary search. Unlike methods that treat LLMs merely as interfaces, AutoMS integrates them as "semantic navigators" to initialize search spaces and break local optima, while our novel Simulation-Aware Evolutionary Search (SAES) addresses the "blindness" of traditional evolutionary strategies. Specifically, SAES utilizes simulation feedback to perform local gradient approximation and directed parameter updates, effectively guiding the search toward physically valid Pareto frontiers. Orchestrating specialized agents (Manager, Parser, Generator, and Simulator), AutoMS achieves a state-of-the-art 83.8\% success rate on 17 diverse cross-physics tasks, nearly doubling the performance of traditional NSGA-II (43.7\%) and significantly outperforming ReAct-based LLM baselines (53.3\%). Furthermore, our hierarchical architecture reduces total execution time by 23.3\%. AutoMS demonstrates that autonomous agent systems can effectively navigate complex physical landscapes, bridging the gap between semantic design intent and rigorous physical validity.

Tri Cao, Bennett Lim, Yue Liu et al.

Computer-Use Agents (CUAs) with full system access enable powerful task automation but pose significant security and privacy risks due to their ability to manipulate files, access user data, and execute arbitrary commands. While prior work has focused on browser-based agents and HTML-level attacks, the vulnerabilities of CUAs remain underexplored. In this paper, we investigate Visual Prompt Injection (VPI) attacks, where malicious instructions are visually embedded within rendered user interfaces, and examine their impact on both CUAs and Browser-Use Agents (BUAs). We propose VPI-Bench, a benchmark of 306 test cases across five widely used platforms, to evaluate agent robustness under VPI threats. Each test case is a variant of a web platform, designed to be interactive, deployed in a realistic environment, and containing a visually embedded malicious prompt. Our empirical study shows that current CUAs and BUAs can be deceived at rates of up to 51% and 100%, respectively, on certain platforms. The experimental results also indicate that system prompt defenses offer only limited improvements. These findings highlight the need for robust, context-aware defenses to ensure the safe deployment of multimodal AI agents in real-world environments. The code and dataset are available at: https://github.com/cua-framework/agents

Tianyang Xue, Haochen Li, Longdu Liu et al.

The inverse design of microstructures plays a pivotal role in optimizing metamaterials with specific, targeted physical properties. While traditional forward design methods are constrained by their inability to explore the vast combinatorial design space, inverse design offers a compelling alternative by directly generating structures that fulfill predefined performance criteria. However, achieving precise control over both geometry and material properties remains a significant challenge due to their intricate interdependence. Existing approaches, which typically rely on voxel or parametric representations, often limit design flexibility and structural diversity. In this work, we present a novel generative model that integrates latent diffusion with Holoplane, an advanced hybrid neural representation that simultaneously encodes both geometric and physical properties. This combination ensures superior alignment between geometry and properties. Our approach generalizes across multiple microstructure classes, enabling the generation of diverse, tileable microstructures with significantly improved property accuracy and enhanced control over geometric validity, surpassing the performance of existing methods. We introduce a multi-class dataset encompassing a variety of geometric morphologies, including truss, shell, tube, and plate structures, to train and validate our model. Experimental results demonstrate the model's ability to generate microstructures that meet target properties, maintain geometric validity, and integrate seamlessly into complex assemblies. Additionally, we explore the potential of our framework through the generation of new microstructures, cross-class interpolation, and the infilling of heterogeneous microstructures. The dataset and source code will be open-sourced upon publication.

Justin Cheung, Samuel Savine, Calvin Nguyen et al.

Supervised deep learning models often achieve excellent performance within their training distribution but struggle to generalize beyond it. In cancer histopathology, for example, a convolutional neural network (CNN) may classify cancer severity accurately for cancer types represented in its training data, yet fail on related but unseen types. Although adenocarcinomas from different organs share morphological features that might support limited cross-domain generalization, addressing domain shift directly is necessary for robust performance. Domain adaptation offers a way to transfer knowledge from labeled data in one cancer type to unlabeled data in another, helping mitigate the scarcity of annotated medical images. This work evaluates cross-domain classification performance among lung, colon, breast, and kidney adenocarcinomas. A ResNet50 trained on any single adenocarcinoma achieves over 98% accuracy on its own domain but shows minimal generalization to others. Ensembling multiple supervised models does not resolve this limitation. In contrast, converting the ResNet50 into a domain adversarial neural network (DANN) substantially improves performance on unlabeled target domains. A DANN trained on labeled breast and colon data and adapted to unlabeled lung data reaches 95.56% accuracy. We also examine the impact of stain normalization on domain adaptation. Its effects vary by target domain: for lung, accuracy drops from 95.56% to 66.60%, while for breast and colon targets, stain normalization boosts accuracy from 49.22% to 81.29% and from 78.48% to 83.36%, respectively. Finally, using Integrated Gradients reveals that DANNs consistently attribute importance to biologically meaningful regions such as densely packed nuclei, indicating that the model learns clinically relevant features and can apply them to unlabeled cancer types.

Renjie Xiao, Bingteng Sun, Yiling Chen et al.

(short version abstract, full in article)High-fidelity flow field reconstruction is important in fluid dynamics, but it is challenged by sparse and spatiotemporally incomplete sensor measurements, as well as failures of pre-deployed measurement points that can invalidate pre-trained reconstruction models. Physics-informed neural networks (PINNs) alleviate dependence on large labeled datasets by incorporating governing physics, yet sensor placement optimization, a key factor in reconstruction accuracy and robustness, remains underexplored. In this study, we propose a PINN with Voronoi-enhanced Sensor Optimization (VSOPINN). VSOPINN enables differentiable soft Voronoi construction for sparse sensor data rasterization, end-to-end fusion of centroidal Voronoi tessellation (CVT) with PINNs for adaptive sensor placement, and unified layout optimization for multi-condition flow reconstruction through a shared encoder-multi-decoder architecture. We validate VSOPINN on three representative problems: lid-driven cavity flow, vascular flow, and annular rotating flow. Results show that VSOPINN significantly improves reconstruction accuracy across different Reynolds numbers, adaptively learns effective sensor layouts, and remains robust under partial sensor failure. The study clarifies the intrinsic relationship between sensor placement and reconstruction precision in PINN-based flow field reconstruction.

Yu Xing, Yang Liu, Tianyang Xue et al.

Lattice metamaterials enable lightweight, multifunctional structures, yet homogenization-based evaluation of their effective properties remains computationally expensive. Neural surrogates offer speed but often lack the accuracy and stability required for engineering-grade simulations. We introduce GMT, a Geometric Multigrid Transformer -- a neural solver with high numerical fidelity for fast and reliable lattice homogenization. GMT achieves architectural alignment with Geometric Multigrid (GMG) by restructuring Point Transformer V3 to operate across sparse GMG hierarchies, capturing long-range dependencies and cross-level interactions essential for multigrid convergence. To enforce physical consistency, GMT incorporates physics-aware positional encoding for strict enforcement of periodicity and predicts both the finest-level solution and multi-level residual corrections. These predictions deliver a spectrally-aligned initialization, enabling end-to-end training under physics-informed and solver-aware losses and requiring only a single GMG V-cycle refinement to reach convergence. This fusion of neural prediction and numerical rigor achieves relative residual errors of $10^{-5}$ with a $160\times$ speedup over state-of-the-art GPU-based solvers at equivalent accuracy -- particularly at high resolutions (e.g. $512^3$), where traditional methods become most costly. We validate GMT across mechanical and thermal domains, demonstrate robust generalization to unseen geometries and non-periodic settings, and showcase scalability to high resolutions -- enabling real-time design iteration, multi-scale simulations, high-throughput material discovery, and inverse design.

Xueyang Zhou, Weidong Wang, Lin Lu et al.

Large Language Model (LLM)-based agents are increasingly deployed in real-world applications such as "digital assistants, autonomous customer service, and decision-support systems", where their ability to "interact in multi-turn, tool-augmented environments" makes them indispensable. However, ensuring the safety of these agents remains a significant challenge due to the diverse and complex risks arising from dynamic user interactions, external tool usage, and the potential for unintended harmful behaviors. To address this critical issue, we propose AutoSafe, the first framework that systematically enhances agent safety through fully automated synthetic data generation. Concretely, 1) we introduce an open and extensible threat model, OTS, which formalizes how unsafe behaviors emerge from the interplay of user instructions, interaction contexts, and agent actions. This enables precise modeling of safety risks across diverse scenarios. 2) we develop a fully automated data generation pipeline that simulates unsafe user behaviors, applies self-reflective reasoning to generate safe responses, and constructs a large-scale, diverse, and high-quality safety training dataset-eliminating the need for hazardous real-world data collection. To evaluate the effectiveness of our framework, we design comprehensive experiments on both synthetic and real-world safety benchmarks. Results demonstrate that AutoSafe boosts safety scores by 45% on average and achieves a 28.91% improvement on real-world tasks, validating the generalization ability of our learned safety strategies. These results highlight the practical advancement and scalability of AutoSafe in building safer LLM-based agents for real-world deployment. We have released the project page at https://auto-safe.github.io/.

Hongjun Liu, Changwei Song, Jiaqi Qiang et al.

Cushing's syndrome is a condition caused by excessive glucocorticoid secretion from the adrenal cortex, often manifesting with moon facies and plethora, making facial data crucial for diagnosis. Previous studies have used pre-trained convolutional neural networks (CNNs) for diagnosing Cushing's syndrome using frontal facial images. However, CNNs are better at capturing local features, while Cushing's syndrome often presents with global facial features. Transformer-based models like ViT and SWIN, which utilize self-attention mechanisms, can better capture long-range dependencies and global features. Recently, DINOv2, a foundation model based on visual Transformers, has gained interest. This study compares the performance of various pre-trained models, including CNNs, Transformer-based models, and DINOv2, in diagnosing Cushing's syndrome. We also analyze gender bias and the impact of freezing mechanisms on DINOv2. Our results show that Transformer-based models and DINOv2 outperformed CNNs, with ViT achieving the highest F1 score of 85.74%. Both the pre-trained model and DINOv2 had higher accuracy for female samples. DINOv2 also showed improved performance when freezing parameters. In conclusion, Transformer-based models and DINOv2 are effective for Cushing's syndrome classification.

Weizheng Zhang, Hao Pan, Lin Lu et al.

Heat exchangers are critical components in a wide range of engineering applications, from energy systems to chemical processing, where efficient thermal management is essential. The design objectives for heat exchangers include maximizing the heat exchange rate while minimizing the pressure drop, requiring both a large interface area and a smooth internal structure. State-of-the-art designs, such as triply periodic minimal surfaces (TPMS), have proven effective in optimizing heat exchange efficiency. However, TPMS designs are constrained by predefined mathematical equations, limiting their adaptability to freeform boundary shapes. Additionally, TPMS structures do not inherently control flow directions, which can lead to flow stagnation and undesirable pressure drops. This paper presents DualMS, a novel computational framework for optimizing dual-channel minimal surfaces specifically for heat exchanger designs in freeform shapes. To the best of our knowledge, this is the first attempt to directly optimize minimal surfaces for two-fluid heat exchangers, rather than relying on TPMS. Our approach formulates the heat exchange maximization problem as a constrained connected maximum cut problem on a graph, with flow constraints guiding the optimization process. To address undesirable pressure drops, we model the minimal surface as a classification boundary separating the two fluids, incorporating an additional regularization term for area minimization. We employ a neural network that maps spatial points to binary flow types, enabling it to classify flow skeletons and automatically determine the surface boundary. DualMS demonstrates greater flexibility in surface topology compared to TPMS and achieves superior thermal performance, with lower pressure drops while maintaining a similar heat exchange rate under the same material cost.

Justin Cheung, Samuel Savine, Calvin Nguyen et al.

Deep learning models which perform well on images from their training distribution can degrade substantially when applied to new distributions. If a CT scanner introduces a new artifact not present in the training labels, the model may misclassify the images. Although modern CT scanners include design features which mitigate these artifacts, unanticipated or difficult-to-mitigate artifacts can still appear in practice. The direct solution of labeling images from this new distribution can be costly. As a more accessible alternative, this study evaluates domain adaptation as an approach for training models that maintain classification performance despite new artifacts, even without corresponding labels. We simulate ring artifacts from detector gain error in sinogram space and evaluate domain adversarial neural networks (DANN) against baseline and augmentation-based approaches on the OrganAMNIST abdominal CT dataset. Our results demonstrate that baseline models trained only on clean images fail to generalize to images with ring artifacts, and traditional augmentation with other distortion types provides no improvement on unseen artifact domains. In contrast, the DANN approach successfully maintains high classification accuracy on ring artifact images using only unlabeled artifact data during training, demonstrating the viability of domain adaptation for artifact robustness. The domain-adapted model achieved classification performance on ring artifact test data comparable to models explicitly trained with labeled artifact images, while also showing unexpected generalization to uniform noise. These findings provide empirical evidence that domain adaptation can effectively address distribution shift in medical imaging without requiring expensive expert labeling of new artifact distributions, suggesting promise for deployment in clinical settings where novel artifacts may emerge.

Yiye Zou, Tianyu Li, Lin Lu et al.

Advances in deep learning have enabled physics-informed neural networks to solve partial differential equations. Numerical differentiation using the finite-difference (FD) method is efficient in physics-constrained designs, even in parameterized settings. In traditional computational fluid dynamics(CFD), body-fitted block-structured grids are often employed for complex flow cases when obtaining FD solutions. However, convolution operators in convolutional neural networks for FD are typically limited to single-block grids. To address this issue, \blueText{graphs and graph networks are used} to learn flow representations across multi-block-structured grids. \blueText{A graph convolution-based FD method (GC-FDM) is proposed} to train graph networks in a label-free physics-constrained manner, enabling differentiable FD operations on unstructured graph outputs. To demonstrate model performance from single- to multi-block-structured grids, \blueText{the parameterized steady incompressible Navier-Stokes equations are solved} for a lid-driven cavity flow and the flows around single and double circular cylinder configurations. When compared to a CFD solver under various boundary conditions, the proposed method achieves a relative error in velocity field predictions on the order of $10^{-3}$. Furthermore, the proposed method reduces training costs by approximately 20\% compared to a physics-informed neural network. \blueText{To} further verify the effectiveness of GC-FDM in multi-block processing, \blueText{a 30P30N airfoil geometry is considered} and the \blueText{predicted} results are reasonable compared with those given by CFD. \blueText{Finally, the applicability of GC-FDM to three-dimensional (3D) case is tested using a 3D cavity geometry.

Zhan Zhang, Qin Zhang, Yang Jiao et al.

AI-aided clinical diagnosis is desired in medical care. Existing deep learning models lack explainability and mainly focus on image analysis. The recently developed Dynamic Uncertain Causality Graph (DUCG) approach is causality-driven, explainable, and invariant across different application scenarios, without problems of data collection, labeling, fitting, privacy, bias, generalization, high cost and high energy consumption. Through close collaboration between clinical experts and DUCG technicians, 46 DUCG models covering 54 chief complaints were constructed. Over 1,000 diseases can be diagnosed without triage. Before being applied in real-world, the 46 DUCG models were retrospectively verified by third-party hospitals. The verified diagnostic precisions were no less than 95%, in which the diagnostic precision for every disease including uncommon ones was no less than 80%. After verifications, the 46 DUCG models were applied in the real-world in China. Over one million real diagnosis cases have been performed, with only 17 incorrect diagnoses identified. Due to DUCG's transparency, the mistakes causing the incorrect diagnoses were found and corrected. The diagnostic abilities of the clinicians who applied DUCG frequently were improved significantly. Following the introduction to the earlier presented DUCG methodology, the recommendation algorithm for potential medical checks is presented and the key idea of DUCG is extracted.

Tianyang Xue, Lin Lu, Yang Liu et al.

2D irregular packing is a classic combinatorial optimization problem with various applications, such as material utilization and texture atlas generation. This NP-hard problem requires efficient algorithms to optimize space utilization. Conventional numerical methods suffer from slow convergence and high computational cost. Existing learning-based methods, such as the score-based diffusion model, also have limitations, such as no rotation support, frequent collisions, and poor adaptability to arbitrary boundaries, and slow inferring. The difficulty of learning from teacher packing is to capture the complex geometric relationships among packing examples, which include the spatial (position, orientation) relationships of objects, their geometric features, and container boundary conditions. Representing these relationships in latent space is challenging. We propose GFPack++, an attention-based gradient field learning approach that addresses this challenge. It consists of two pivotal strategies: \emph{attention-based geometry encoding} for effective feature encoding and \emph{attention-based relation encoding} for learning complex relationships. We investigate the utilization distribution between the teacher and inference data and design a weighting function to prioritize tighter teacher data during training, enhancing learning effectiveness. Our diffusion model supports continuous rotation and outperforms existing methods on various datasets. We achieve higher space utilization over several widely used baselines, one-order faster than the previous diffusion-based method, and promising generalization for arbitrary boundaries. We plan to release our source code and datasets to support further research in this direction.

Lin Lu

Scoring the driving performance of various drivers on a unified scale, based on how safe or economical they drive on their daily trips, is essential for the driver profile task. Connected vehicles provide the opportunity to collect real-world driving data, which is advantageous for constructing scoring models. However, the lack of pre-labeled scores impede the use of supervised regression models and the data privacy issues hinder the way of traditionally data-centralized learning on the cloud side for model training. To address them, an unsupervised scoring method is presented without the need for labels while still preserving fairness and objectiveness compared to subjective scoring strategies. Subsequently, a federated learning framework based on vehicle-cloud collaboration is proposed as a privacy-friendly alternative to centralized learning. This framework includes a consistently federated version of the scoring method to reduce the performance degradation of the global scoring model caused by the statistical heterogeneous challenge of local data. Theoretical and experimental analysis demonstrate that our federated scoring model is consistent with the utility of the centrally learned counterpart and is effective in evaluating driving performance.

Yong Bai, Yuanfang Guo, Jinjie Wei et al.

With the development of deep neural networks, digital fake paintings can be generated by various style transfer algorithms.To detect the fake generated paintings, we analyze the fake generated and real paintings in Fourier frequency domain and observe statistical differences and artifacts. Based on our observations, we propose Fake Generated Painting Detection via Frequency Analysis (FGPD-FA) by extracting three types of features in frequency domain. Besides, we also propose a digital fake painting detection database for assessing the proposed method. Experimental results demonstrate the excellence of the proposed method in different testing conditions.