Andreas Stöckl

Roland Aigner, Andreas Stöckl

Knitted sensors frequently suffer from inconsistencies due to innate effects such as offset, relaxation, and drift. These properties, in combination, make it challenging to reliably map from sensor data to physical actuation. In this paper, we demonstrate a method for counteracting this by applying processing using a minimal artificial neural network (ANN) in combination with straightforward pre-processing. We apply a number of exponential smoothing filters on a re-sampled sensor signal, to produce features that preserve different levels of historical sensor data and, in combination, represent an adequate state of previous sensor actuation. By training a three-layer ANN with a total of 8 neurons, we manage to significantly improve the mapping between sensor reading and actuation force. Our findings also show that our technique translates to sensors of reasonably different composition in terms of material and structure, and it can furthermore be applied to related physical features such as strain.

Andreas Stöckl

We generate synthetic images with the "Stable Diffusion" image generation model using the Wordnet taxonomy and the definitions of concepts it contains. This synthetic image database can be used as training data for data augmentation in machine learning applications, and it is used to investigate the capabilities of the Stable Diffusion model. Analyses show that Stable Diffusion can produce correct images for a large number of concepts, but also a large variety of different representations. The results show differences depending on the test concepts considered and problems with very specific concepts. These evaluations were performed using a vision transformer model for image classification.

Regina Gugg, Selina Niederländer, Andreas Stöckl et al.

The rapid adoption of LLMs in both research and industry highlights the challenges of deploying them safely and reveals a gap in the systematic evaluation of toxicity benchmarks. As organizations increasingly rely on these benchmarks to certify models for customer-facing applications and automated moderation, unrecognized evaluation biases could lead to the deployment of vulnerable or unsafe systems. This work investigates the robustness of established benchmarking setups and examines how to measure currently neglected intrinsic biases, such as those related to model choice, metrics, and task types. Our experiments uncover significant discrepancies in benchmark behaviors when evaluation setups are altered. Specifically, shifting the task from text completion to summarization increases the tendency of benchmarks to flag content as harmful. Additionally, certain benchmarks fail to maintain consistent behavior when the input data domain is changed. Furthermore, we observe model-specific instabilities, demonstrating a clear need for more robust and comprehensive safety evaluation frameworks.

Moritz Alker, David C. Schedl, Andreas Stöckl

This study examines the use of social media and news images to detect and measure hailstones, utilizing pre-trained multimodal large language models. The dataset for this study comprises 474 crowdsourced images of hailstones from documented hail events in Austria, which occurred between January 2022 and September 2024. These hailstones have maximum diameters ranging from 2 to 11cm. We estimate the hail diameters and compare four different models utilizing one-stage and two-stage prompting strategies. The latter utilizes additional size cues from reference objects, such as human hands, within the image. Our results show that pretrained models already have the potential to measure hailstone diameters from images with an average mean absolute error of 1.12cm for the best model. In comparison to a single-stage prompt, two-stage prompting improves the reliability of most models. Our study suggests that these off-the-shelf models, even without fine-tuning, can complement traditional hail sensors by extracting meaningful and spatially dense information from social media imagery, enabling faster and more detailed assessments of severe weather events. The automated real-time image harvesting from social media and other sources remains an open task, but it will make our approach directly applicable to future hail events.

Stephanie Wohlfahrt, Christoph Praschl, Horst Leitner et al.

We use unmanned aerial drones to estimate wildlife density in southeastern Austria and compare these estimates to camera trap data. Traditional methods like capture-recapture, distance sampling, or camera traps are well-established but labour-intensive or spatially constrained. Using thermal (IR) and RGB imagery, drones enable efficient, non-intrusive animal counting. Our surveys were conducted during the leafless period on single days in October and November 2024 in three areas of a sub-Illyrian hill and terrace landscape. Flight transects were based on predefined launch points using a 350 m grid and an algorithm that defined the direction of systematically randomized transects. This setup allowed surveying large areas in one day using multiple drones, minimizing double counts. Flight altitude was set at 60 m to avoid disturbing roe deer (Capreolus capreolus) while ensuring detection. Animals were manually annotated in the recorded imagery and extrapolated to densities per square kilometer. We applied three extrapolation methods with increasing complexity: naive area-based extrapolation, bootstrapping, and zero-inflated negative binomial modelling. For comparison, a Random Encounter Model (REM) estimate was calculated using camera trap data from the flight period. The drone-based methods yielded similar results, generally showing higher densities than REM, except in one area in October. We hypothesize that drone-based density reflects daytime activity in open and forested areas, while REM estimates average activity over longer periods within forested zones. Although both approaches estimate density, they offer different perspectives on wildlife presence. Our results show that drones offer a promising, scalable method for wildlife density estimation.

Samuel Zühlke, Andreas Stöckl, David C. Schedl

This study presents a novel approach for touch sensing using semi-elastic textile surfaces that does not require the placement of additional sensors in the sensing area, instead relying on sensors located on the border of the textile. The proposed approach is demonstrated through experiments involving an elastic Jersey fabric and a variety of machine-learning models. The performance of one particular border-based sensor design is evaluated in depth. By using visual markers, the best-performing visual sensor arrangement predicts a single touch point with a mean squared error of 1.36 mm on an area of 125mm by 125mm. We built a textile only prototype that is able to classify touch at three indent levels (0, 15, and 20 mm) with an accuracy of 82.85%. Our results suggest that this approach has potential applications in wearable technology and smart textiles, making it a promising avenue for further exploration in these fields.

Andreas Stöckl

We built models with Logistic Regression and linear Support Vector Machines on a large dataset consisting of regular news articles and news from satirical websites, and showed that such linear classifiers on a corpus with about 60,000 articles can perform with a precision of 98.7% and a recall of 95.2% on a random test set of the news. On the other hand, when testing the classifier on "publication sources" which are completely unknown during training, only an accuracy of 88.2% and an F1-score of 76.3% are achieved. As another result, we showed that the same algorithm can distinguish between news written by the news agency itself and paid articles from customers. Here the results had an accuracy of 99%.

Andreas Stöckl

For the webportal "Who is in the News!" with statistics about the appearence of persons in written news we developed an extension, which measures the relationship of public persons depending on a time parameter, as the relationship may vary over time. On a training corpus of English and German news articles we built a measure by extracting the persons occurrence in the text via pretrained named entity extraction and then construct time series of counts for each person. Pearson correlation over a sliding window is then used to measure the relation of two persons.