John Subosits

James Dallas, Thomas Lew, John Talbot et al.

Safety filters provide a practical approach for enforcing safety constraints in autonomous systems. While learning-based tools scale to high-dimensional systems, their performance depends on informative data that includes states likely to lead to constraint violation, which can be difficult to efficiently sample in complex, high-dimensional systems. In this work, we characterize trajectories that barely avoid safety violations using the Pontryagin Maximum Principle. These boundary trajectories are used to guide data collection for learned Hamilton-Jacobi Reachability, concentrating learning efforts near safety-critical states to improve efficiency. The learned Control Barrier Value Function is then used directly for safety filtering. Simulations and experimental validation on a shared-control automotive racing application demonstrate PMP sampling improves learning efficiency, yielding faster convergence, reduced failure rates, and improved safe set reconstruction, with wall times around 3ms.

Thomas Lew, Marcus Greiff, John Subosits et al.

Proximal methods such as the Alternating Direction Method of Multipliers (ADMM) are effective at solving constrained quadratic programs (QPs). To tackle infeasible QPs, slack variables are often introduced to ensure feasibility, which changes the structure of the problem, increases its size, and slows down numerical resolution. In this letter, we propose a simple ADMM scheme to tackle QPs with slack variables without increasing the size of the original problem. The only modification is a slightly different projection in the z-update, while the rest of the algorithm remains standard. We prove that the method is equivalent to applying ADMM to the QP with additional slack variables, even though slack variables are not added. Numerical experiments show speedups of the approach.

Alexander Davydov, Franck Djeumou, Marcus Greiff et al.

Combining data-driven models that adapt online and model predictive control (MPC) has enabled effective control of nonlinear systems. However, when deployed on unstable systems, online adaptation may not be fast enough to ensure reliable simultaneous learning and control. For example, a controller on a vehicle executing highly dynamic maneuvers--such as drifting to avoid an obstacle--may push the vehicle's tires to their friction limits, destabilizing the vehicle and allowing modeling errors to quickly compound and cause a loss of control. To address this challenge, we present an active information gathering framework for identifying vehicle dynamics as quickly as possible. We propose an expressive vehicle dynamics model that leverages Bayesian last-layer meta-learning to enable rapid online adaptation. The model's uncertainty estimates are used to guide informative data collection and quickly improve the model prior to deployment. Dynamic drifting experiments on a Toyota Supra show that (i) the framework enables reliable control of a vehicle at the edge of stability, (ii) online adaptation alone may not suffice for zero-shot control and can lead to undesirable transient errors or spin-outs, and (iii) active data collection helps achieve reliable performance.

Franck Djeumou, Michael Thompson, Makoto Suminaka et al.

The skill to drift a car--i.e., operate in a state of controlled oversteer like professional drivers--could give future autonomous cars maximum flexibility when they need to retain control in adverse conditions or avoid collisions. We investigate real-time drifting strategies that put the car where needed while bypassing expensive trajectory optimization. To this end, we design a reinforcement learning agent that builds on the concept of tire energy absorption to autonomously drift through changing and complex waypoint configurations while safely staying within track bounds. We achieve zero-shot deployment on the car by training the agent in a simulation environment built on top of a neural stochastic differential equation vehicle model learned from pre-collected driving data. Experiments on a Toyota GR Supra and Lexus LC 500 show that the agent is capable of drifting smoothly through varying waypoint configurations with tracking error as low as 10 cm while stably pushing the vehicles to sideslip angles of up to 63°.

Emre Adabag, Marcus Greiff, John Subosits et al.

Differentiable model predictive control (MPC) offers a powerful framework for combining learning and control. However, its adoption has been limited by the inherently sequential nature of traditional optimization algorithms, which are challenging to parallelize on modern computing hardware like GPUs. In this work, we tackle this bottleneck by introducing a GPU-accelerated differentiable optimization tool for MPC. This solver leverages sequential quadratic programming and a custom preconditioned conjugate gradient (PCG) routine with tridiagonal preconditioning to exploit the problem's structure and enable efficient parallelization. We demonstrate substantial speedups over CPU- and GPU-based baselines, significantly improving upon state-of-the-art training times on benchmark reinforcement learning and imitation learning tasks. Finally, we showcase the method on the challenging task of reinforcement learning for driving at the limits of handling, where it enables robust drifting of a Toyota Supra through water puddles.

Nitin R. Kapania, John Subosits, J Christian Gerdes

The problem of maneuvering a vehicle through a race course in minimum time requires computation of both longitudinal (brake and throttle) and lateral (steering wheel) control inputs. Unfortunately, solving the resulting nonlinear optimal control problem is typically computationally expensive and infeasible for real-time trajectory planning. This paper presents an iterative algorithm that divides the path generation task into two sequential subproblems that are significantly easier to solve. Given an initial path through the race track, the algorithm runs a forward-backward integration scheme to determine the minimum-time longitudinal speed profile, subject to tire friction constraints. With this fixed speed profile, the algorithm updates the vehicle's path by solving a convex optimization problem that minimizes the resulting path curvature while staying within track boundaries and obeying affine, time-varying vehicle dynamics constraints. This two-step process is repeated iteratively until the predicted lap time no longer improves. While providing no guarantees of convergence or a globally optimal solution, the approach performs very well when validated on the Thunderhill Raceway course in Willows, CA. The predicted lap time converges after four to five iterations, with each iteration over the full 4.5 km race course requiring only thirty seconds of computation time on a laptop computer. The resulting trajectory is experimentally driven at the race circuit with an autonomous Audi TTS test vehicle, and the resulting lap time and racing line is comparable to both a nonlinear gradient descent solution and a trajectory recorded from a professional racecar driver. The experimental results indicate that the proposed method is a viable option for online trajectory planning in the near future.