Juan Rivas-Davila

Connor Cremers, Chenghao Wan, Calvin H. Lin et al.

We present induction-heated resonant reactors, a new concept in electrified thermochemistry in which the reactor itself serves as a volumetric electromagnetic resonator heated through resonant wireless power transfer. We use the Swiss roll resonator as a model system and show that it can be designed to support uniform volumetric heating profiles and enhanced heat transfer characteristics, creating opportunities for process intensification in scaled systems. Compared to conventional (i.e., non-resonant) induction heating systems, resonant reactors can achieve exceptionally high system efficiencies through the combination of near-unity power-to-heat efficiencies and low thermal losses, both enabled by the utilization of resonant energy transfer. These concepts demonstrate how the integration of electromagnetic power transduction with thermochemical reaction engineering enables new opportunities for utilizing green electricity in sustainable chemical conversion.

Vakhtang Chulukhadze, Kristi Nguyen, Eric Stolt et al.

Piezoelectric micromachined ultrasonic transducers (PMUTs) are widely utilized in applications that demand mechanical resilience, thermal stability, and compact form factors. Recent efforts have sought to demonstrate that single-crystal lithium niobate (LN) is a promising PMUT material platform, offering high electromechanical coupling (k^2) and bidirectional performance. In addition, advances in LN film transfer technology have enabled high-quality periodically poled piezoelectric films (P3F), facilitating a bimorph piezoelectric stack without intermediate electrodes. In this work, we showcase a bimorph PMUT incorporating a mechanically robust, 20 um thick P3F LN active layer. We establish the motivation for LN PMUTs through a material comparison, followed by extensive membrane geometry optimization and subsequent enhancement of the PMUT's k^2. We demonstrate a 775 kHz flexural mode device with a quality factor (Q) of 200 and an extracted k^2 of 6.4%, yielding a high transmit efficiency of 65 nm/V with a mechanically robust active layer. We leverage the high performance to demonstrate extreme-temperature resilience, showcasing stable device operation up to 600 degrees C and survival up to 900 degrees C, highlighting LN's potential as a resilient PMUT platform.

Dillon Jensen, Obi Nnorom, Grant Wilkins et al.

Large-scale AI model training workloads use thousands of GPUs operating in tightly synchronized loops. During synchronous communication, start-up, shut-down, and checkpointing, GPU power consumption can swing from peak to idle within milliseconds. These large and rapid load swings endanger grid infrastructure as they induce steep power ramp rates, voltage and frequency shifts, and reactive power transients that can damage transformers, converters, and protection equipment. To solve this problem, we introduce EasyRider, a power architecture to mitigate power fluctuations at the rack level. EasyRider uses passive components and actively-controlled auxiliary energy storage to attenuate rack power swings. A software system continually monitors the energy storage system to maximize its lifetime in the presence of frequent charge/discharge cycles. EasyRider filters rack power variations to be within grid safety requirements without requiring software modifications to AI training frameworks or wasting energy. We evaluate EasyRider on a 400VDC-rated prototype system against published workload traces and our own GPU testbed, demonstrating its effectiveness across heterogeneous power levels and workload power profiles.