Jianfeng Li

Aoduo Li, Haoran Lv, Bingquan Ou et al.

Libraries require autonomous robots to move quietly through narrow aisles while remaining safe around readers, chairs, bags, and carts. This paper presents a ROS 2 navigation system for a Unitree Go2 Edu quadruped equipped with a 4D LiDAR, a front depth camera, and an IMU. Rather than assuming the library is rough terrain, we target the practical mobility discontinuities of real deployments, including floor transitions, temporary clutter, and partially blocked passages where low-clearance wheeled platforms are less tolerant. RTAB-Map is used for visual-LiDAR SLAM, AMCL and EKF-based sensor fusion provide localization, and a Nav2 stack with A* and DWA supports planning and local avoidance. In a real library, the system achieves 100%, 96%, and 88% success rates in static, low-density dynamic, and high-density dynamic scenes, while map validation against surveyed control distances yields a mean metric error of 3.7 cm.

Zhigen Li, Jianxiang Peng, Yanmeng Wang et al.

Dialogue agents powered by Large Language Models (LLMs) show superior performance in various tasks. Despite the better user understanding and human-like responses, their lack of controllability remains a key challenge, often leading to unfocused conversations or task failure. To address this, we introduce Standard Operating Procedure (SOP) to regulate dialogue flow. Specifically, we propose ChatSOP, a novel SOP-guided Monte Carlo Tree Search (MCTS) planning framework designed to enhance the controllability of LLM-driven dialogue agents. To enable this, we curate a dataset comprising SOP-annotated multi-scenario dialogues, generated using a semi-automated role-playing system with GPT-4o and validated through strict manual quality control. Additionally, we propose a novel method that integrates Chain of Thought reasoning with supervised fine-tuning for SOP prediction and utilizes SOP-guided Monte Carlo Tree Search for optimal action planning during dialogues. Experimental results demonstrate the effectiveness of our method, such as achieving a 27.95% improvement in action accuracy compared to baseline models based on GPT-3.5 and also showing notable gains for open-source models. Dataset and codes are publicly available.

Yuhao Shan, Qianyi Yuan, Jingguo Liu et al.

Panoramic cameras, capable of capturing a 360-degree field of view, are crucial in robotic vision, particularly in environments with sparse features. However, non-upright panoramas due to unstable robot postures hinder downstream tasks. Traditional IMU-based correction methods suffer from drift and external disturbances, while vision-based approaches offer a promising alternative. This study presents a dual-stream angle-aware generation network that jointly estimates camera inclination angles and reconstructs upright panoramic images. The network comprises a CNN branch that extracts local geometric structures from equirectangular projections and a ViT branch that captures global contextual cues from cubemap projections. These are integrated through a dual-projection adaptive fusion module that aligns spatial features across both domains. To further enhance performance, we introduce a high-frequency enhancement block, circular padding, and channel attention mechanisms to preserve 360° continuity and improve geometric sensitivity. Experiments on the SUN360 and M3D datasets demonstrate that our method outperforms existing approaches in both inclination estimation and upright panorama generation. Ablation studies further validate the contribution of each module and highlight the synergy between the two tasks. The code and related datasets can be found at: https://github.com/YuhaoShine/DualProjectionFusion.

Heyu Chen, Jianfeng Li, Shigang Li

Nowadays, panoramic images can be easily obtained by panoramic cameras. However, when the panoramic camera orientation is tilted, a non-upright panoramic image will be captured. Existing upright adjustment models focus on how to estimate more accurate camera orientation, and attribute image reconstruction to offline or post-processing tasks. To this end, we propose an online end-to-end network for upright adjustment. Our network is designed to reconstruct the image while finding the angle. Our network consists of three modules: orientation estimation, LUT online generation, and upright reconstruction. Direction estimation estimates the tilt angle of the panoramic image. Then, a converter block with upsampling function is designed to generate angle to LUT. This module can output corresponding online LUT for different input angles. Finally, a lightweight generative adversarial network (GAN) aims to generate upright images from shallow features. The experimental results show that in terms of angles, we have improved the accuracy of small angle errors. In terms of image reconstruction, In image reconstruction, we have achieved the first real-time online upright reconstruction of panoramic images using deep learning networks.

Zhihan Liu, Yubo Chai, Jianfeng Li

The advent of Large Language Models (LLMs) has created new opportunities for the automation of scientific research spanning both experimental processes and computational simulations. This study explores the feasibility of constructing an autonomous simulation agent (ASA) powered by LLMs through prompt engineering and automated program design to automate the entire simulation research process according to a human-provided research plan. This process includes experimental design, remote upload and simulation execution, data analysis, and report compilation. Using a well-studied simulation problem of polymer chain conformations as a test case, we assessed the long-task completion and reliability of ASAs powered by different LLMs, including GPT-4o, Claude-3.5, etc. Our findings revealed that ASA-GPT-4o achieved near-flawless execution on designated research missions, underscoring the potential of methods like ASA to achieve automation in simulation research processes to enhance research efficiency. The outlined automation can be iteratively performed for up to 20 cycles without human intervention, illustrating the potential of ASA for long-task workflow automation. Additionally, we discussed the intrinsic traits of ASA in managing extensive tasks, focusing on self-validation mechanisms, and the balance between local attention and global oversight.

Jianfeng Li, Junqiao Zhao, Shuangfu Song et al.

Estimating geometric elements such as depth, camera motion, and optical flow from images is an important part of the robot's visual perception. We use a joint self-supervised method to estimate the three geometric elements. Depth network, optical flow network and camera motion network are independent of each other but are jointly optimized during training phase. Compared with independent training, joint training can make full use of the geometric relationship between geometric elements and provide dynamic and static information of the scene. In this paper, we improve the joint self-supervision method from three aspects: network structure, dynamic object segmentation, and geometric constraints. In terms of network structure, we apply the attention mechanism to the camera motion network, which helps to take advantage of the similarity of camera movement between frames. And according to attention mechanism in Transformer, we propose a plug-and-play convolutional attention module. In terms of dynamic object, according to the different influences of dynamic objects in the optical flow self-supervised framework and the depth-pose self-supervised framework, we propose a threshold algorithm to detect dynamic regions, and mask that in the loss function respectively. In terms of geometric constraints, we use traditional methods to estimate the fundamental matrix from the corresponding points to constrain the camera motion network. We demonstrate the effectiveness of our method on the KITTI dataset. Compared with other joint self-supervised methods, our method achieves state-of-the-art performance in the estimation of pose and optical flow, and the depth estimation has also achieved competitive results. Code will be available https://github.com/jianfenglihg/Unsupervised_geometry.

Jianfeng Li, Junqiao Zhao, Tiantian Feng et al.

In this paper, we proposed an unsupervised learning method for estimating the optical flow between video frames, especially to solve the occlusion problem. Occlusion is caused by the movement of an object or the movement of the camera, defined as when certain pixels are visible in one video frame but not in adjacent frames. Due to the lack of pixel correspondence between frames in the occluded area, incorrect photometric loss calculation can mislead the optical flow training process. In the video sequence, we found that the occlusion in the forward ($t\rightarrow t+1$) and backward ($t\rightarrow t-1$) frame pairs are usually complementary. That is, pixels that are occluded in subsequent frames are often not occluded in the previous frame and vice versa. Therefore, by using this complementarity, a new weighted loss is proposed to solve the occlusion problem. In addition, we calculate gradients in multiple directions to provide richer supervision information. Our method achieves competitive optical flow accuracy compared to the baseline and some supervised methods on KITTI 2012 and 2015 benchmarks. This source code has been released at https://github.com/jianfenglihg/UnOpticalFlow.git.

Jianfeng Li, Feng Wang, Ke Tang

Physics-Informed Neural Networks have become a powerful mesh-free method for solving partial differential equations, but their performance is often limited by spectral bias. Specifically, in standard MLPs used in PINNs, the global parameter coupling causes the model to prioritize learning low-frequency components, resulting in slow convergence for high-frequency details. To overcome this limitation, we introduce the Physics-Informed Local Implicit Representation (PILIR). Our approach separates the global physical domain into a discrete latent feature space and a continuous generative decoder. By using a learnable grid to encode explicit spatial locality, PILIR can capture high-frequency details locally, preventing dilution by global patterns. A generative neural operator then synthesizes these local latent features into continuous physical fields, allowing accurate reconstruction of fine-scale structures. Experiments on a range of challenging PDEs show that PILIR effectively mitigates spectral bias, thereby boosting the convergence of high-frequency details and achieving superior accuracy compared to state-of-the-art methods.

Jian Qu, Xiaobo Ma, Jianfeng Li

Over the years, network traffic analysis and generation have advanced significantly. From traditional statistical methods, the field has progressed to sophisticated deep learning techniques. This progress has improved the ability to detect complex patterns and security threats, as well as to test and optimize network performance. However, obstacles persist, such as the dependence on labeled data for analysis and the difficulty of generating traffic samples that follow realistic patterns. Pre-trained deep neural networks have emerged as powerful tools to resolve these issues, offering improved performance by learning robust data representations from large unlabeled datasets. Despite their benefits, existing pre-trained models face challenges like token length limitation, which restricts their usefulness in comprehensive traffic analysis and realistic traffic generation. To address these challenges, we introduce TrafficGPT, a deep learning model that can tackle complex challenges related to long flow classification and generation tasks. This model uses generative pre-training with the linear attention mechanism, which allows for a substantially increased capacity of up to 12,032 tokens from the previous limit of only 512 tokens. TrafficGPT demonstrates superior performance in classification tasks, reaching state-of-the-art levels. In generation tasks, it closely resembles real traffic flows, with low JS divergence and an F1 score close to 0.5 (representing a random guess) in discriminating generated data. These advancements hold promise for future applications in both traffic flow classification and generation tasks.

Zhigen Li, Yanmeng Wang, Rizhao Fan et al.

Paraphrase generation is a longstanding NLP task and achieves great success with the aid of large corpora. However, transferring a paraphrasing model to another domain encounters the problem of domain shifting especially when the data is sparse. At the same time, widely using large pre-trained language models (PLMs) faces the overfitting problem when training on scarce labeled data. To mitigate these two issues, we propose, LAPA, an effective adapter for PLMs optimized by meta-learning. LAPA has three-stage training on three types of related resources to solve this problem: 1. pre-training PLMs on unsupervised corpora, 2. inserting an adapter layer and meta-training on source domain labeled data, and 3. fine-tuning adapters on a small amount of target domain labeled data. This method enables paraphrase generation models to learn basic language knowledge first, then learn the paraphrasing task itself later, and finally adapt to the target task. Our experimental results demonstrate that LAPA achieves state-of-the-art in supervised, unsupervised, and low-resource settings on three benchmark datasets. With only 2\% of trainable parameters and 1\% labeled data of the target task, our approach can achieve a competitive performance with previous work.

Qinyu Ma, Yuhao Zhou, Jianfeng Li

Identifying reliable synthesis pathways in materials chemistry is a complex task, particularly in polymer science, due to the intricate and often non-unique nomenclature of macromolecules. To address this challenge, we propose an agent system that integrates large language models (LLMs) and knowledge graphs. By leveraging LLMs' powerful capabilities for extracting and recognizing chemical substance names, and storing the extracted data in a structured knowledge graph, our system fully automates the retrieval of relevant literatures, extraction of reaction data, database querying, construction of retrosynthetic pathway trees, further expansion through the retrieval of additional literature and recommendation of optimal reaction pathways. By considering the complex interdependencies among chemical reactants, a novel Multi-branched Reaction Pathway Search Algorithm (MBRPS) is proposed to help identify all valid multi-branched reaction pathways, which arise when a single product decomposes into multiple reaction intermediates. In contrast, previous studies were limited to cases where a product decomposes into at most one reaction intermediate. This work represents the first attempt to develop a fully automated retrosynthesis planning agent tailored specially for macromolecules powered by LLMs. Applied to polyimide synthesis, our new approach constructs a retrosynthetic pathway tree with hundreds of pathways and recommends optimized routes, including both known and novel pathways. This demonstrates utilizing LLMs for literature consultation to accomplish specific tasks is possible and crucial for future materials research, given the vast amount of materials-related literature.

Yuhao Zhou, Huangyan Shen, Qingliang Song et al.

The directed self-assembly (DSA) of block copolymers (BCPs) offers a highly promising approach for the fabrication of contact holes or vertical interconnect access at sub-7nm technology nodes. To fabricate circular holes with precisely controlled size and positions, the self-assembly of block copolymers requires guidance from a properly designed template. Effectively parameterizing the template shape to enable efficient optimization remains a critical yet challenging problem. Moreover, the optimized template must possess excellent manufacturability for practical applications. In this work, we propose a Gaussian descriptor for characterizing the template shape with only two parameters. We further propose to use AB/AB binary blends instead of pure diblock copolymer to improve the adaptability of the block copolymer system to the template shape. The Bayesian optimization (BO) is applied to co-optimize the binary blend and the template shape. Our results demonstrate that BO based on the Gaussian descriptor can efficiently yield the optimal templates for diverse multi-hole patterns, all leading to highly matched self-assembled morphologies. Moreover, by imposing constraints on the variation of curvature of the template during optimization, superior manufacturability is ensured for each optimized template. It is noteworthy that each key parameter of the blend exhibits a relatively wide tunable window under the requirement of rather high precision. Our work provides valuable insights for advancing DSA technology, and thus potentially propels its practical applications forward.

Jingguo Liu, Han Yu, Shigang Li et al.

Due to the current lack of large-scale datasets at the million-scale level, tasks involving panoramic images predominantly rely on existing two-dimensional pre-trained image benchmark models as backbone networks. However, these networks are not equipped to recognize the distortions and discontinuities inherent in panoramic images, which adversely affects their performance in such tasks. In this paper, we introduce a novel spherical sampling method for panoramic images that enables the direct utilization of existing pre-trained models developed for two-dimensional images. Our method employs spherical discrete sampling based on the weights of the pre-trained models, effectively mitigating distortions while achieving favorable initial training values. Additionally, we apply the proposed sampling method to panoramic image segmentation, utilizing features obtained from the spherical model as masks for specific channel attentions, which yields commendable results on commonly used indoor datasets, Stanford2D3D.

Fujiao Ju, Yuxuan Wang, Shuo Wang et al.

Adolescent idiopathic scoliosis (AIS), a prevalent spinal deformity, significantly affects individuals' health and quality of life. Conventional imaging techniques, such as X - rays, computed tomography (CT), and magnetic resonance imaging (MRI), offer static views of the spine. However, they are restricted in capturing the dynamic changes of the spine and its interactions with overall body motion. Therefore, developing new techniques to address these limitations has become extremely important. Dynamic digital human modeling represents a major breakthrough in digital medicine. It enables a three - dimensional (3D) view of the spine as it changes during daily activities, assisting clinicians in detecting deformities that might be missed in static imaging. Although dynamic modeling holds great potential, constructing an accurate static digital human model is a crucial initial step for high - precision simulations. In this study, our focus is on constructing an accurate static digital human model integrating the spine, which is vital for subsequent dynamic digital human research on AIS. First, we generate human point - cloud data by combining the 3D Gaussian method with the Skinned Multi - Person Linear (SMPL) model from the patient's multi - view images. Then, we fit a standard skeletal model to the generated human model. Next, we align the real spine model reconstructed from CT images with the standard skeletal model. We validated the resulting personalized spine model using X - ray data from six AIS patients, with Cobb angles (used to measure the severity of scoliosis) as evaluation metrics. The results indicate that the model's error was within 1 degree of the actual measurements. This study presents an important method for constructing digital humans.

Jianfeng Li, Jiawen Zhang, Feng Wang et al.

One-shot methods have significantly advanced the field of neural architecture search (NAS) by adopting weight-sharing strategy to reduce search costs. However, the accuracy of performance estimation can be compromised by co-adaptation. Few-shot methods divide the entire supernet into individual sub-supernets by splitting edge by edge to alleviate this issue, yet neglect relationships among edges and result in performance degradation on huge search space. In this paper, we introduce HEP-NAS, a hierarchy-wise partition algorithm designed to further enhance accuracy. To begin with, HEP-NAS treats edges sharing the same end node as a hierarchy, permuting and splitting edges within the same hierarchy to directly search for the optimal operation combination for each intermediate node. This approach aligns more closely with the ultimate goal of NAS. Furthermore, HEP-NAS selects the most promising sub-supernet after each segmentation, progressively narrowing the search space in which the optimal architecture may exist. To improve performance evaluation of sub-supernets, HEP-NAS employs search space mutual distillation, stabilizing the training process and accelerating the convergence of each individual sub-supernet. Within a given budget, HEP-NAS enables the splitting of all edges and gradually searches for architectures with higher accuracy. Experimental results across various datasets and search spaces demonstrate the superiority of HEP-NAS compared to state-of-the-art methods.

Yi Zeng, Jinwei Li, Hui Zhu et al.

Passive acoustic mapping (PAM) is a promising tool for monitoring acoustic cavitation activities in the applications of ultrasound therapy. Data-adaptive beamformers for PAM have better image quality compared to the time exposure acoustics (TEA) algorithms. However, the computational cost of data-adaptive beamformers is considerably expensive. In this work, we develop a deep beamformer based on a generative adversarial network, which can switch between different transducer arrays and reconstruct high-quality PAM images directly from radio frequency ultrasound signals with low computational cost. The deep beamformer was trained on the dataset consisting of simulated and experimental cavitation signals of single and multiple microbubble clouds measured by different (linear and phased) arrays covering 1-15 MHz. We compared the performance of the deep beamformer to TEA and three different data-adaptive beamformers using the simulated and experimental test dataset. Compared with TEA, the deep beamformer reduced the energy spread area by 18.9%-65.0% and improved the image signal-to-noise ratio by 9.3-22.9 dB in average for the different arrays in our data. Compared to the data-adaptive beamformers, the deep beamformer reduced the computational cost by three orders of magnitude achieving 10.5 ms image reconstruction speed in our data, while the image quality was as good as that of the data-adaptive beamformers. These results demonstrated the potential of the deep beamformer for high-resolution monitoring of microbubble cavitation activities for ultrasound therapy.

Gang Peng, Yuezhi Zheng, Jianfeng Li et al.

At present, most high-accuracy single-person pose estimation methods have high computational complexity and insufficient real-time performance due to the complex structure of the network model. However, a single-person pose estimation method with high real-time performance also needs to improve its accuracy due to the simple structure of the network model. It is currently difficult to achieve both high accuracy and real-time performance in single-person pose estimation. For use in human-machine cooperative operations, this paper proposes a single-person upper limb pose estimation method based on an end-to-end approach for accurate and real-time limb pose estimation. Using the stacked hourglass network model, a single-person upper limb skeleton key point detection model was designed.Deconvolution was employed to replace the up-sampling operation of the hourglass module in the original model, solving the problem of rough feature maps. Integral regression was used to calculate the position coordinates of key points of the skeleton, reducing quantization errors and calculations. Experiments showed that the developed single-person upper limb skeleton key point detection model achieves high accuracy and that the pose estimation method based on the end-to-end approach provides high accuracy and real-time performance.

Jingyuan Wang, Ze Wang, Jianfeng Li et al.

Recent years have witnessed the unprecedented rising of time series from almost all kindes of academic and industrial fields. Various types of deep neural network models have been introduced to time series analysis, but the important frequency information is yet lack of effective modeling. In light of this, in this paper we propose a wavelet-based neural network structure called multilevel Wavelet Decomposition Network (mWDN) for building frequency-aware deep learning models for time series analysis. mWDN preserves the advantage of multilevel discrete wavelet decomposition in frequency learning while enables the fine-tuning of all parameters under a deep neural network framework. Based on mWDN, we further propose two deep learning models called Residual Classification Flow (RCF) and multi-frequecy Long Short-Term Memory (mLSTM) for time series classification and forecasting, respectively. The two models take all or partial mWDN decomposed sub-series in different frequencies as input, and resort to the back propagation algorithm to learn all the parameters globally, which enables seamless embedding of wavelet-based frequency analysis into deep learning frameworks. Extensive experiments on 40 UCR datasets and a real-world user volume dataset demonstrate the excellent performance of our time series models based on mWDN. In particular, we propose an importance analysis method to mWDN based models, which successfully identifies those time-series elements and mWDN layers that are crucially important to time series analysis. This indeed indicates the interpretability advantage of mWDN, and can be viewed as an indepth exploration to interpretable deep learning.

Yihui He, Xiaobo Ma, Xiapu Luo et al.

Security surveillance is one of the most important issues in smart cities, especially in an era of terrorism. Deploying a number of (video) cameras is a common surveillance approach. Given the never-ending power offered by vehicles to metropolises, exploiting vehicle traffic to design camera placement strategies could potentially facilitate security surveillance. This article constitutes the first effort toward building the linkage between vehicle traffic and security surveillance, which is a critical problem for smart cities. We expect our study could influence the decision making of surveillance camera placement, and foster more research of principled ways of security surveillance beneficial to our physical-world life. Code has been made publicly available.

Yang Hu, John C. S. Lui, Wenjun Hu et al.

Disk encryption is frequently used to secure confidential data on mobile devices. However, the high energy cost of disk encryption poses a heavy burden on those devices with limited battery capacity especially when a large amount of data needs to be protected by disk encryption. To address the challenge, we develop a new kernel-level disk encryption software, Populus. Almost 98% of Populus's encryption/decryption computation is not related with the input plaintext/ciphertext, so we accomplish the computation in advance during initialization when a consistent power supply is available. We conduct cryptanalysis on Populus and finally conclude that state-of-the-art cryptanalysis techniques fail to break Populus in reasonable computational complexity. We also conduct energy consumption experiments on Populus and dm-crypt, a famous disk encryption software for Android and Linux mobile devices. The experimental results demonstrate that Populus consumes 50%-70% less energy than dm-crypt.

Yiming Cui, Shijin Wang, Jianfeng Li

Artificial neural networks are powerful models, which have been widely applied into many aspects of machine translation, such as language modeling and translation modeling. Though notable improvements have been made in these areas, the reordering problem still remains a challenge in statistical machine translations. In this paper, we present a novel neural reordering model that directly models word pairs and alignment. By utilizing LSTM recurrent neural networks, much longer context could be learned for reordering prediction. Experimental results on NIST OpenMT12 Arabic-English and Chinese-English 1000-best rescoring task show that our LSTM neural reordering feature is robust and achieves significant improvements over various baseline systems.