Mingyao Qi

Haoyue Liu, Sheng Liu, Mingyao Qi

Matching demand with supply in crowdsourcing logistics platforms must contend with uncertain worker participation. Motivated by this challenge, we study a two-stage "recommend-to-match" problem under stochastic supplier rejections, where each demand is initially recommended to multiple potential suppliers prior to final matching decisions. We formulate a stochastic optimization model that explicitly captures uncertain supplier acceptance behavior. For the special case with homogeneous and independent acceptance responses, an exact mixed-integer linear program and LP formulations are achievable, but the general problem does not admit an efficient formulation. Particularly, our analysis reveals that deterministic linear approximation methods can perform arbitrarily poorly in such settings. To overcome this limitation, we propose a new approximation approach based on a convex relaxation of the original problem that admits a mixed-integer exponential cone program (MIECP) formulation. We analyze the structural properties of this approximation and establish its parametric performance guarantees. We also characterize conditions under which it can dominate a deterministic approximation. Extensive experiments on synthetic data and real-world freight data validate the effectiveness of our approach. Our MIECP-based solution achieves near-optimal matching performance while reducing computation time by over 90% compared to benchmark methods, which makes it particularly promising for large-scale matching problems.

Dacheng Liao, Mengshi Qi, Peng Shu et al.

Current Vision-Language Model (VLM)-based end-to-end autonomous driving systems often leverage large language models to generate driving decisions directly based on their understanding of the current scene. However, such systems introduce multiple risks in real-world driving scenarios. To evaluate whether VLMs are truly viable for autonomous driving, we introduce RoboDriveBench, the first robustness benchmark focused on end-to-end trajectory prediction tasks. This benchmark systematically evaluates two critical categories of real-world challenges for VLM-based end-to-end autonomous driving systems through 11 simulated scenarios encompassing various corruption types, including 6 scenarios of sensor corruption caused by environmental variations, along with 5 cases of prompt corruption resulting from human intervention and data transmission failures. Each corruption type includes 250 unique driving scenarios and 5,689 frames, resulting in 64,559 total trajectory prediction cases per evaluation. To overcome these real-world challenges, we propose a novel VLM-based autonomous driving framework called RoboDriveVLM, which enhances robustness by mapping more multimodal data-e.g., lidar and radar-into a unified latent space. Furthermore, we introduce a new Test-Time Adaptation (TTA) method based on cross-modal knowledge distillation to improve the robustness of VLM-based autonomous driving systems. Through extensive experiments, our work highlights the limitations of current VLM-based end-to-end autonomous driving systems and provides a more reliable solution for real-world deployment. Source code and datasets will be released.

Mengshi Qi, Pengfei Zhu, Xiangtai Li et al.

Given a single labeled example, in-context segmentation aims to segment corresponding objects. This setting, known as one-shot segmentation in few-shot learning, explores the segmentation model's generalization ability and has been applied to various vision tasks, including scene understanding and image/video editing. While recent Segment Anything Models have achieved state-of-the-art results in interactive segmentation, these approaches are not directly applicable to in-context segmentation. In this work, we propose the Dual Consistency SAM (DC-SAM) method based on prompt-tuning to adapt SAM and SAM2 for in-context segmentation of both images and videos. Our key insights are to enhance the features of the SAM's prompt encoder in segmentation by providing high-quality visual prompts. When generating a mask prior, we fuse the SAM features to better align the prompt encoder. Then, we design a cycle-consistent cross-attention on fused features and initial visual prompts. Next, a dual-branch design is provided by using the discriminative positive and negative prompts in the prompt encoder. Furthermore, we design a simple mask-tube training strategy to adopt our proposed dual consistency method into the mask tube. Although the proposed DC-SAM is primarily designed for images, it can be seamlessly extended to the video domain with the support of SAM2. Given the absence of in-context segmentation in the video domain, we manually curate and construct the first benchmark from existing video segmentation datasets, named In-Context Video Object Segmentation (IC-VOS), to better assess the in-context capability of the model. Extensive experiments demonstrate that our method achieves 55.5 (+1.4) mIoU on COCO-20i, 73.0 (+1.1) mIoU on PASCAL-5i, and a J&F score of 71.52 on the proposed IC-VOS benchmark. Our source code and benchmark are available at https://github.com/zaplm/DC-SAM.

Pengfei Zhu, Peng Shu, Mengshi Qi et al.

Accurate prediction of future trajectories of traffic agents is essential for ensuring safe autonomous driving. However, partially observed trajectories can significantly degrade the performance of even state-of-the-art models. Previous approaches often rely on knowledge distillation to transfer features from fully observed trajectories to partially observed ones. This involves firstly training a fully observed model and then using a distillation process to create the final model. While effective, they require multi-stage training, making the training process very expensive. Moreover, knowledge distillation can lead to a performance degradation of the model. In this paper, we introduce a Target-driven Self-Distillation method (TSD) for motion forecasting. Our method leverages predicted accurate targets to guide the model in making predictions under partial observation conditions. By employing self-distillation, the model learns from the feature distributions of both fully observed and partially observed trajectories during a single end-to-end training process. This enhances the model's ability to predict motion accurately in both fully observed and partially observed scenarios. We evaluate our method on multiple datasets and state-of-the-art motion forecasting models. Extensive experimental results demonstrate that our approach achieves significant performance improvements in both settings. To facilitate further research, we will release our code and model checkpoints.

Jiaxuan Peng, Mengshi Qi, Dong Zhao et al.

3D human pose estimation (3D HPE) has emerged as a prominent research topic, particularly in the realm of RGB-based methods. However, RGB images are susceptible to limitations such as sensitivity to lighting conditions and potential user discomfort. Consequently, multi-modal sensing, which leverages non-intrusive sensors, is gaining increasing attention. Nevertheless, multi-modal 3D HPE still faces challenges, including modality imbalance and the imperative for continual learning. In this work, we introduce a novel balanced continual multi-modal learning method for 3D HPE, which harnesses the power of RGB, LiDAR, mmWave, and WiFi. Specifically, we propose a Shapley value-based contribution algorithm to quantify the contribution of each modality and identify modality imbalance. To address this imbalance, we employ a re-learning strategy. Furthermore, recognizing that raw data is prone to noise contamination, we develop a novel denoising continual learning approach. This approach incorporates a noise identification and separation module to mitigate the adverse effects of noise and collaborates with the balanced learning strategy to enhance optimization. Additionally, an adaptive EWC mechanism is employed to alleviate catastrophic forgetting. We conduct extensive experiments on the widely-adopted multi-modal dataset, MM-Fi, which demonstrate the superiority of our approach in boosting 3D pose estimation and mitigating catastrophic forgetting in complex scenarios. We will release our codes.

Wulian Yun, Mengshi Qi, Fei Peng et al.

Conventional 2D human pose estimation methods typically require extensive labeled annotations, which are both labor-intensive and expensive. In contrast, semi-supervised 2D human pose estimation can alleviate the above problems by leveraging a large amount of unlabeled data along with a small portion of labeled data. Existing semi-supervised 2D human pose estimation methods update the network through backpropagation, ignoring crucial historical information from the previous training process. Therefore, we propose a novel semi-supervised 2D human pose estimation method by utilizing a newly designed Teacher-Reviewer-Student framework. Specifically, we first mimic the phenomenon that human beings constantly review previous knowledge for consolidation to design our framework, in which the teacher predicts results to guide the student's learning and the reviewer stores important historical parameters to provide additional supervision signals. Secondly, we introduce a Multi-level Feature Learning strategy, which utilizes the outputs from different stages of the backbone to estimate the heatmap to guide network training, enriching the supervisory information while effectively capturing keypoint relationships. Finally, we design a data augmentation strategy, i.e., Keypoint-Mix, to perturb pose information by mixing different keypoints, thus enhancing the network's ability to discern keypoints. Extensive experiments on publicly available datasets, demonstrate our method achieves significant improvements compared to the existing methods.

Jing He, Xinglu Liu, Qiyao Duan et al.

Nowadays, fast delivery services have created the need for high-density warehouses. The puzzle-based storage system is a practical way to enhance the storage density, however, facing difficulties in the retrieval process. In this work, a deep reinforcement learning algorithm, specifically the Double&Dueling Deep Q Network, is developed to solve the multi-item retrieval problem in the system with general settings, where multiple desired items, escorts, and I/O points are placed randomly. Additionally, we propose a general compact integer programming model to evaluate the solution quality. Extensive numerical experiments demonstrate that the reinforcement learning approach can yield high-quality solutions and outperforms three related state-of-the-art heuristic algorithms. Furthermore, a conversion algorithm and a decomposition framework are proposed to handle simultaneous movement and large-scale instances respectively, thus improving the applicability of the PBS system.