Selin Aviyente

Meiby Ortiz-Bouza, Selin Aviyente

Networks are commonly used to model complex systems. The different entities in the system are represented by nodes of the network and their interactions by edges. In most real life systems, the different entities may interact in different ways necessitating the use of multiplex networks where multiple links are used to model the interactions. One of the major tools for inferring network topology is community detection. Although there are numerous works on community detection in single-layer networks, existing community detection methods for multiplex networks mostly learn a common community structure across layers and do not take the heterogeneity across layers into account. In this paper, we introduce a new multiplex community detection method that identifies communities that are common across layers as well as those that are unique to each layer. The proposed method, Multiplex Orthogonal Nonnegative Matrix Tri-Factorization, represents the adjacency matrix of each layer as the sum of two low-rank matrix factorizations corresponding to the common and private communities, respectively. Unlike most of the existing methods, which require the number of communities to be pre-determined, the proposed method also introduces a two stage method to determine the number of common and private communities. The proposed algorithm is evaluated on synthetic and real multiplex networks, as well as for multiview clustering applications, and compared to state-of-the-art techniques.

Alp Ozdemir, Ali Zare, Mark A. Iwen et al.

The widespread use of multisensor technology and the emergence of big datasets have created the need to develop tools to reduce, approximate, and classify large and multimodal data such as higher-order tensors. While early approaches focused on matrix and vector based methods to represent these higher-order data, more recently it has been shown that tensor decomposition methods are better equipped to capture couplings across their different modes. For these reasons, tensor decomposition methods have found applications in many different signal processing problems including dimensionality reduction, signal separation, linear regression, feature extraction, and classification. However, most of the existing tensor decomposition methods are based on the principle of finding a low-rank approximation in a linear subspace structure, where the definition of the rank may change depending on the particular decomposition. Since many datasets are not necessarily low-rank in a linear subspace, this often results in high approximation errors or low compression rates. In this paper, we introduce a new adaptive, multi-scale tensor decomposition method for higher order data inspired by hybrid linear modeling and subspace clustering techniques. In particular, we develop a multi-scale higher-order singular value decomposition (MS-HoSVD) approach where a given tensor is first permuted and then partitioned into several sub-tensors each of which can be represented as a low-rank tensor with increased representational efficiency. The proposed approach is evaluated for dimensionality reduction and classification for several different real-life tensor signals with promising results.

Meiby Ortiz-Bouza, Selin Aviyente

Many real-world systems can be represented as graphs where the different entities in the system are presented by nodes and their interactions by edges. An important task in studying large datasets with graphical structure is graph clustering. While there has been a lot of work on graph clustering using the connectivity between the nodes, many real-world networks also have node attributes. Clustering attributed graphs requires joint modeling of graph structure and node attributes. Recent work has focused on combining these two complementary sources of information through graph convolutional networks and graph filtering. However, these methods are mostly limited to lowpass filtering and do not explicitly learn the filter parameters for the clustering task. In this paper, we introduce a graph signal processing based approach, where we learn the parameters of Finite Impulse Response (FIR) and Autoregressive Moving Average (ARMA) graph filters optimized for clustering. The proposed approach is formulated as a two-step iterative optimization problem, focusing on learning interpretable graph filters that are optimal for the given data and that maximize the separation between different clusters. The proposed approach is evaluated on attributed networks and compared to the state-of-the-art methods.

Saba Nasiri, Selin Aviyente, Dorina Thanou

Learning representations from multiplex graphs, i.e., multi-layer networks where nodes interact through multiple relation types, is challenging due to the entanglement of shared (common) and layer-specific (private) information, which limits generalization and interpretability. In this work, we introduce a causal inference-based framework that disentangles common and private components in a self-supervised manner. CaDeM jointly (i) aligns shared embeddings across layers, (ii) enforces private embeddings to capture layer-specific signals, and (iii) applies backdoor adjustment to ensure that the common embeddings capture only global information while being separated from the private representations. Experiments on synthetic and real-world datasets demonstrate consistent improvements over existing baselines, highlighting the effectiveness of our approach for robust and interpretable multiplex graph representation learning.

Meiby Ortiz-Bouza, Selin Aviyente

Multiplex networks have emerged as a promising approach for modeling complex systems, where each layer represents a different mode of interaction among entities of the same type. A core task in analyzing these networks is to identify the community structure for a better understanding of the overall functioning of the network. While different methods have been proposed to detect the community structure of multiplex networks, the majority deal with extracting the consensus community structure across layers. In this paper, we address the community detection problem across two closely related multiplex networks. For example in neuroimaging studies, it is common to have multiple multiplex brain networks where each layer corresponds to an individual and each group to different experimental conditions. In this setting, one may be interested in both learning the community structure representing each experimental condition and the discriminative community structure between two groups. In this paper, we introduce two discriminative community detection algorithms based on spectral clustering. The first approach aims to identify the discriminative subgraph structure between the groups, while the second one learns the discriminative and the consensus community structures, simultaneously. The proposed approaches are evaluated on both simulated and real world multiplex networks.

Bisakh Banerjee, Mohammad Alwardat, Tapabrata Maiti et al.

Identifying the graphical structure underlying the observed multivariate data is essential in numerous applications. Current methodologies are predominantly confined to deducing a singular graph under the presumption that the observed data are uniform. However, many contexts involve heterogeneous datasets that feature multiple closely related graphs, typically referred to as multiview graphs. Previous research on multiview graph learning promotes edge-based similarity across layers using pairwise or consensus-based regularizers. However, multiview graphs frequently exhibit a shared node-based architecture across different views, such as common hub nodes. Such commonalities can enhance the precision of learning and provide interpretive insight. In this paper, we propose a co-hub node model, positing that different views share a common group of hub nodes. The associated optimization framework is developed by enforcing structured sparsity on the connections of these co-hub nodes. Moreover, we present a theoretical examination of layer identifiability and determine bounds on estimation error. The proposed methodology is validated using both synthetic graph data and fMRI time series data from multiple subjects to discern several closely related graphs.

Rachita Mondal, Mert Indibi, Tapabrata Maiti et al.

Anomaly detection in spatiotemporal data is a challenging problem encountered in a variety of applications, including video surveillance, medical imaging data, and urban traffic monitoring. Existing anomaly detection methods focus mainly on point anomalies and cannot deal with temporal and spatial dependencies that arise in spatio-temporal data. Tensor-based anomaly detection methods have been proposed to address this problem. Although existing methods can capture dependencies across different modes, they are primarily supervised and do not account for the specific structure of anomalies. Moreover, these methods focus mainly on extracting anomalous features without providing any statistical confidence. In this paper, we introduce an unsupervised tensor-based anomaly detection method that simultaneously considers the sparse and spatiotemporally smooth nature of anomalies. The anomaly detection problem is formulated as a regularized robust low-rank + sparse tensor decomposition where the total variation of the tensor with respect to the underlying spatial and temporal graphs quantifies the spatiotemporal smoothness of the anomalies. Once the anomalous features are extracted, we introduce a statistical anomaly scoring framework that accounts for local spatio-temporal dependencies. The proposed framework is evaluated on both synthetic and real data.

Abdullah Karaaslanli, Bisakh Banerjee, Tapabrata Maiti et al.

Real-world data is often represented through the relationships between data samples, forming a graph structure. In many applications, it is necessary to learn this graph structure from the observed data. Current graph learning research has primarily focused on unsigned graphs, which consist only of positive edges. However, many biological and social systems are better described by signed graphs that account for both positive and negative interactions, capturing similarity and dissimilarity between samples. In this paper, we develop a method for learning signed graphs from a set of smooth signed graph signals. Specifically, we employ the net Laplacian as a graph shift operator (GSO) to define smooth signed graph signals as the outputs of a low-pass signed graph filter defined by the net Laplacian. The signed graph is then learned by formulating a non-convex optimization problem where the total variation of the observed signals is minimized with respect to the net Laplacian. The proposed problem is solved using alternating direction method of multipliers (ADMM) and a fast algorithm reducing the per-ADMM iteration complexity from quadratic to linear in the number of nodes is introduced. Furthermore, theoretical proofs of convergence for the algorithm and a bound on the estimation error of the learned net Laplacian as a function of sample size, number of nodes, and graph topology are provided. Finally, the proposed method is evaluated on simulated data and gene regulatory network inference problem and compared to existing signed graph learning methods.

Meiby Ortiz-Bouza, Duc Vu, Abdullah Karaaslanli et al.

Over the past two decades, tools from network science have been leveraged to characterize the organization of both structural and functional networks of the brain. One such measure of network organization is hub node identification. Hubs are specialized nodes within a network that link distinct brain units corresponding to specialized functional processes. Conventional methods for identifying hub nodes utilize different types of centrality measures and participation coefficient to profile various aspects of nodal importance. These methods solely rely on the functional connectivity networks constructed from functional magnetic resonance imaging (fMRI), ignoring the structure-function coupling in the brain. In this paper, we introduce a graph signal processing (GSP) based hub detection framework that utilizes both the structural connectivity and the functional activation to identify hub nodes. The proposed framework models functional activity as graph signals on the structural connectivity. Hub nodes are then detected based on the premise that hub nodes are sparse, have higher level of activity compared to their neighbors, and the non-hub nodes' activity can be modeled as the output of a graph-based filter. Based on these assumptions, an optimization framework, GraFHub, is formulated to learn the coefficients of the optimal polynomial graph filter and detect the hub nodes. The proposed framework is evaluated on both simulated data and resting state fMRI (rs-fMRI) data from Human Connectome Project (HCP).

Abdullah Karaaslanli, Selin Aviyente

Graph topology inference, i.e., learning graphs from a given set of nodal observations, is a significant task in many application domains. Existing approaches are mostly limited to learning a single graph assuming that the observed data is homogeneous. This is problematic because many modern datasets are heterogeneous or mixed and involve multiple related graphs, i.e., multiview graphs. Recent work proposing to learn multiview graphs ensures the similarity of learned view graphs through pairwise regularization, where each pair of views is encouraged to have similar structures. However, this approach cannot infer the shared structure across views. In this work, we propose an alternative method based on consensus regularization, where views are ensured to be similar through a learned consensus graph representing the common structure of the views. In particular, we propose an optimization problem, where graph data is assumed to be smooth over the multiview graph and the topology of the individual views and that of the consensus graph are learned, simultaneously. Our optimization problem is designed to be general in the sense that different regularization functions can be used depending on what the shared structure across views is. Moreover, we propose two regularization functions that extend fused and group graphical lasso to consensus based regularization. Proposed multiview graph learning is evaluated on simulated data and shown to have better performance than existing methods. It is also employed to infer the functional brain connectivity networks of multiple subjects from their electroencephalogram (EEG) recordings. The proposed method reveals the structure shared by subjects as well as the characteristics unique to each subject.

Li Peide, Seyyid Emre Sofuoglu, Tapabrata Maiti et al.

Multimodal data arise in various applications where information about the same phenomenon is acquired from multiple sensors and across different imaging modalities. Learning from multimodal data is of great interest in machine learning and statistics research as this offers the possibility of capturing complementary information among modalities. Multimodal modeling helps to explain the interdependence between heterogeneous data sources, discovers new insights that may not be available from a single modality, and improves decision-making. Recently, coupled matrix-tensor factorization has been introduced for multimodal data fusion to jointly estimate latent factors and identify complex interdependence among the latent factors. However, most of the prior work on coupled matrix-tensor factors focuses on unsupervised learning and there is little work on supervised learning using the jointly estimated latent factors. This paper considers the multimodal tensor data classification problem. A Coupled Support Tensor Machine (C-STM) built upon the latent factors jointly estimated from the Advanced Coupled Matrix Tensor Factorization (ACMTF) is proposed. C-STM combines individual and shared latent factors with multiple kernels and estimates a maximal-margin classifier for coupled matrix tensor data. The classification risk of C-STM is shown to converge to the optimal Bayes risk, making it a statistically consistent rule. C-STM is validated through simulation studies as well as a simultaneous EEG-fMRI analysis. The empirical evidence shows that C-STM can utilize information from multiple sources and provide a better classification performance than traditional single-mode classifiers.

Seyyid Emre Sofuoglu, Selin Aviyente

Anomaly detection in spatiotemporal data is a challenging problem encountered in a variety of applications including hyperspectral imaging, video surveillance, and urban traffic monitoring. Existing anomaly detection methods are most suited for point anomalies in sequence data and cannot deal with temporal and spatial dependencies that arise in spatiotemporal data. In recent years, tensor-based methods have been proposed for anomaly detection to address this problem. These methods rely on conventional tensor decomposition models, not taking the structure of the anomalies into account, and are supervised or semi-supervised. We introduce an unsupervised tensor-based anomaly detection method that takes the sparse and temporally continuous nature of anomalies into account. In particular, the anomaly detection problem is formulated as a robust lowrank + sparse tensor decomposition with a regularization term that minimizes the temporal variation of the sparse part, so that the extracted anomalies are temporally persistent. We also approximate rank minimization with graph total variation minimization to reduce the complexity of the optimization algorithm. The resulting optimization problem is convex, scalable, and is shown to be robust against missing data and noise. The proposed framework is evaluated on both synthetic and real spatiotemporal urban traffic data and compared with baseline methods.

Seyyid Emre Sofuoglu, Selin Aviyente

Higher-order data with high dimensionality arise in a diverse set of application areas such as computer vision, video analytics and medical imaging. Tensors provide a natural tool for representing these types of data. Although there has been a lot of work in the area of tensor decomposition and low-rank tensor approximation, extensions to supervised learning, feature extraction and classification are still limited. Moreover, most of the existing supervised tensor learning approaches are based on the orthogonal Tucker model. However, this model has some limitations for large tensors including high memory and computational costs. In this paper, we introduce a supervised learning approach for tensor classification based on the tensor-train model. In particular, we introduce a multi-branch tensor network structure for efficient implementation of tensor-train discriminant analysis (TTDA). The proposed approach takes advantage of the flexibility of the tensor train structure to implement various computationally efficient versions of TTDA. This approach is then evaluated on image and video classification tasks with respect to computation time, storage cost and classification accuracy and is compared to both vector and tensor based discriminant analysis methods.

Arash Golibagh Mahyari, Selin Aviyente

With the advances in high resolution neuroimaging, there has been a growing interest in the detection of functional brain connectivity. Complex network theory has been proposed as an attractive mathematical representation of functional brain networks. However, most of the current studies of functional brain networks have focused on the computation of graph theoretic indices for static networks, i.e. long-time averages of connectivity networks. It is well-known that functional connectivity is a dynamic process and the construction and reorganization of the networks is key to understanding human cognition. Therefore, there is a growing need to track dynamic functional brain networks and identify time intervals over which the network is quasi-stationary. In this paper, we present a tensor decomposition based method to identify temporally invariant 'network states' and find a common topographic representation for each state. The proposed methods are applied to electroencephalogram (EEG) data during the study of error-related negativity (ERN).