Weihua Zhuang

Xuemin, Shen, Jie Gao et al.

In this tutorial paper, we look into the evolution and prospect of network architecture and propose a novel conceptual architecture for the 6th generation (6G) networks. The proposed architecture has two key elements, i.e., holistic network virtualization and pervasive artificial intelligence (AI). The holistic network virtualization consists of network slicing and digital twin, from the aspects of service provision and service demand, respectively, to incorporate service-centric and user-centric networking. The pervasive network intelligence integrates AI into future networks from the perspectives of networking for AI and AI for networking, respectively. Building on holistic network virtualization and pervasive network intelligence, the proposed architecture can facilitate three types of interplay, i.e., the interplay between digital twin and network slicing paradigms, between model-driven and data-driven methods for network management, and between virtualization and AI, to maximize the flexibility, scalability, adaptivity, and intelligence for 6G networks. We also identify challenges and open issues related to the proposed architecture. By providing our vision, we aim to inspire further discussions and developments on the potential architecture of 6G.

Zhibin Wang, Yong Zhou, Yuanming Shi et al.

Federated learning (FL) over resource-constrained wireless networks has recently attracted much attention. However, most existing studies consider one FL task in single-cell wireless networks and ignore the impact of downlink/uplink inter-cell interference on the learning performance. In this paper, we investigate FL over a multi-cell wireless network, where each cell performs a different FL task and over-the-air computation (AirComp) is adopted to enable fast uplink gradient aggregation. We conduct convergence analysis of AirComp-assisted FL systems, taking into account the inter-cell interference in both the downlink and uplink model/gradient transmissions, which reveals that the distorted model/gradient exchanges induce a gap to hinder the convergence of FL. We characterize the Pareto boundary of the error-induced gap region to quantify the learning performance trade-off among different FL tasks, based on which we formulate an optimization problem to minimize the sum of error-induced gaps in all cells. To tackle the coupling between the downlink and uplink transmissions as well as the coupling among multiple cells, we propose a cooperative multi-cell FL optimization framework to achieve efficient interference management for downlink and uplink transmission design. Results demonstrate that our proposed algorithm achieves much better average learning performance over multiple cells than non-cooperative baseline schemes.

Conghao Zhou, Jie Gao, Mushu Li et al.

In this paper, we design a resource management scheme to support stateful applications, which will be prevalent in 6G networks. Different from stateless applications, stateful applications require context data while executing computing tasks from user terminals (UTs). Using a multi-tier computing paradigm with servers deployed at the core network, gateways, and base stations to support stateful applications, we aim to optimize long-term resource reservation by jointly minimizing the usage of computing, storage, and communication resources and the cost from reconfiguring resource reservation. The coupling among different resources and the impact of UT mobility create challenges in resource management. To address the challenges, we develop digital twin (DT) empowered network planning with two elements, i.e., multi-resource reservation and resource reservation reconfiguration. First, DTs are designed for collecting UT status data, based on which UTs are grouped according to their mobility patterns. Second, an algorithm is proposed to customize resource reservation for different groups to satisfy their different resource demands. Last, a Meta-learning-based approach is developed to reconfigure resource reservation for balancing the network resource usage and the reconfiguration cost. Simulation results demonstrate that the proposed DT-empowered network planning outperforms benchmark frameworks by using less resources and incurring lower reconfiguration costs.

Feijie Wu, Shiqi He, Song Guo et al.

Traditional one-bit compressed stochastic gradient descent can not be directly employed in multi-hop all-reduce, a widely adopted distributed training paradigm in network-intensive high-performance computing systems such as public clouds. According to our theoretical findings, due to the cascading compression, the training process has considerable deterioration on the convergence performance. To overcome this limitation, we implement a sign-bit compression-based learning synchronization framework, Marsit. It prevents cascading compression via an elaborate bit-wise operation for unbiased sign aggregation and its specific global compensation mechanism for mitigating compression deviation. The proposed framework retains the same theoretical convergence rate as non-compression mechanisms. Experimental results demonstrate that Marsit reduces up to 35% training time while preserving the same accuracy as training without compression.

Wen Wu, Kaige Qu, Peng Yang et al.

In this paper, we study a network slicing problem for edge-cloud orchestrated vehicular networks, in which the edge and cloud servers are orchestrated to process computation tasks for reducing network slicing cost while satisfying the quality of service requirements. We propose a two-stage network slicing framework, which consists of 1) network planning stage in a large timescale to perform slice deployment, edge resource provisioning, and cloud resource provisioning, and 2) network operation stage in a small timescale to perform resource allocation and task dispatching. Particularly, we formulate the network slicing problem as a two-timescale stochastic optimization problem to minimize the network slicing cost. Since the problem is NP-hard due to coupled network planning and network operation stages, we develop a Two timescAle netWork Slicing (TAWS) algorithm by collaboratively integrating reinforcement learning (RL) and optimization methods, which can jointly make network planning and operation decisions. Specifically, by leveraging the timescale separation property of decisions, we decouple the problem into a large-timescale network planning subproblem and a small-timescale network operation subproblem. The former is solved by an RL method, and the latter is solved by an optimization method. Simulation results based on real-world vehicle traffic traces show that the TAWS can effectively reduce the network slicing cost as compared to the benchmark scheme.

Xiaodan Shao, Chuangye Shan, Weihua Zhuang et al.

In this paper, we propose a distributed flexible coupler antenna (FCA) array to enhance communication performance with low hardware cost. At each FCA, there is one fixed-position active antenna and multiple passive couplers that can move within a designated region around the active antenna. Moreover, each FCA is equipped with a local processing unit (LPU). All LPUs exchange signals with a central processing unit (CPU) for joint signal processing. We study an FCA-aided multiuser multiple-input multiple-output (MIMO) system, where an FCA array base station (BS) is deployed to enhance the downlink communication between the BS and multiple single-antenna users. We formulate optimization problems to maximize the achievable sum rate of users by jointly optimizing the coupler positions and digital beamforming, subject to movement constraints on the coupler positions and the transmit power constraint. To address the resulting nonconvex optimization problem, the digital beamforming is expressed as a function of the FCA position vectors, which are then optimized using the proposed distributed coupler position optimization algorithm. Considering a structured time domain pattern of pilots and coupler positions, pilot-assisted centralized and distributed channel estimation algorithms are designed under the FCA array architecture. Simulation results demonstrate that the distributed FCA array achieves substantial rate gains over conventional benchmarks in multiuser systems without moving active antennas, and approaches the performance of fully active arrays while significantly reducing hardware cost and power consumption. Moreover, the proposed channel estimation algorithms outperform the benchmark schemes in terms of both pilot overhead and channel reconstruction accuracy.

Xiaodan Shao, Chuangye Shan, Weihua Zhuang et al.

Flexible coupler antenna systems have recently received significant research interest due to their capability to intelligently reconfigure wireless channels by controlling coupler positions and/or rotations and dynamically exploiting mutual coupling. In this paper, we investigate a new type of flexible coupler antenna, termed rotatable coupler antenna (RCA), for enabling spectrum and energy efficient wireless communication cost-effectively. Specifically, an RCA consists of one fixed active antenna and multiple low-cost passive couplers, each of which can independently rotate in three-dimensional (3D) space, so as to collaboratively achieve mechanical beamforming without requiring additional radio-frequency (RF) chains for the couplers. We study an RCA-enhanced point-to-point communication system, where one RCA is deployed at the transmitter to serve a single user equipped with a fixed antenna. Based on multi-port circuit theory, we establish the channel model and characterize the mutual coupling coefficients as a function of coupler rotations. We formulate a new problem to maximize the received signal-to-noise ratio (SNR) at the user by optimizing the 3D rotations of all couplers, subject to practical coupler rotation constraints. To tackle this nonconvex problem, we develop a spherical-cap conditional-gradient-based algorithm with cross-entropy-method initialization. Simulation results demonstrate that the proposed RCA system can significantly improve communication performance in comparison with benchmark schemes, while requiring substantially fewer active antennas and RF chains.

Xiaodan Shao, Chuangye Shan, Weihua Zhuang et al.

Flexible coupler antenna (FCA) is a new technique that aims to improve the performance of wireless communication networks by smartly translating low-cost passive couplers around fixed-position active antennas to reshape the induced currents on the passive elements for radiation. Specifically, different couplers can independently control their positions/rotations at the transceiver and thereby collaboratively achieve mechanical beamforming for directional signal enhancement or nulling. The position and/or rotation reconfiguration of passive couplers provides a new and cost-effective means of enhancing wireless communication performance, while significantly reducing the antenna and radio-frequency (RF) chain costs of conventional active arrays. The compact and low form-factor structure of the FCA makes it particularly appealing for devices with stringent size, weight, and power (SWAP) constraints. In this article, we provide an overview of FCA to reveal its promising capabilities in wireless networks, including its system modeling, practical implementation, and competitive advantages over existing techniques. We present a variety of FCA-enabled performance enhancements in terms of mechanical beamforming gain, path-loss reduction, fading mitigation, spatial multiplexing gain, interference suppression, and geometric gain. Furthermore, we elaborate on the design challenges of FCA as well as promising solutions, and discuss the key applications of FCA in wireless networks. Finally, numerical results are presented to verify the substantial capacity gains enabled by FCA-aided transmission in wireless networks.

Xiucheng Wang, Tingwei Yuan, Yang Cao et al.

Radio maps (RMs) serve as environment-aware electromagnetic (EM) representations that connect scenario geometry and material properties to the spatial distribution of signal strength, enabling localization without costly in-situ measurements. However, constructing high-fidelity indoor RMs remains challenging due to the prohibitive latency of EM solvers and the limitations of learning-based methods, which often rely on sparse measurements or assumptions of homogeneous material, which are misaligned with the heterogeneous and multipath-rich nature of indoor environments. To overcome these challenges, we propose iRadioDiff, a sampling-free diffusion-based framework for indoor RM construction. iRadioDiff is conditioned on access point (AP) positions, and physics-informed prompt encoded by material reflection and transmission coefficients. It further incorporates multipath-critical priors, including diffraction points, strong transmission boundaries, and line-of-sight (LoS) contours, to guide the generative process via conditional channels and boundary-weighted objectives. This design enables accurate modeling of nonstationary field discontinuities and efficient construction of physically consistent RMs. Experiments demonstrate that iRadioDiff achieves state-of-the-art performance in indoor RM construction and received signal strength based indoor localization, which offers effective generalization across layouts and material configurations. Code is available at https://github.com/UNIC-Lab/iRadioDiff.

Conghao Zhou, Jie Gao, Shisheng Hu et al.

Future 6G networks are envisioned to facilitate edge-assisted mobile augmented reality (MAR) via strengthening the collaboration between MAR devices and edge servers. In order to provide immersive user experiences, MAR devices must timely upload camera frames to an edge server for simultaneous localization and mapping (SLAM)-based device pose tracking. In this paper, to cope with user-specific and non-stationary uplink data traffic, we develop a digital twin (DT)-based approach for user-centric communication service provision for MAR. Specifically, to establish DTs for individual MAR devices, we first construct a data model customized for MAR that captures the intricate impact of the SLAM-based frame uploading mechanism on the user-specific data traffic pattern. We then define two DT operation functions that cooperatively enable adaptive switching between different data-driven models for capturing non-stationary data traffic. Leveraging the user-oriented data management introduced by DTs, we propose an algorithm for network resource management that ensures the timeliness of frame uploading and the robustness against inherent inaccuracies in data traffic modeling for individual MAR devices. Trace-driven simulation results demonstrate that the user-centric communication service provision achieves a 14.2% increase in meeting the camera frame uploading delay requirement in comparison with the slicing-based communication service provision widely used for 5G.

Omar Alhussein, Ning Zhang, Sami Muhaidat et al.

This paper explores the integration of active machine learning (ML) for 6G networks, an area that remains under-explored yet holds potential. Unlike passive ML systems, active ML can be made to interact with the network environment. It actively selects informative and representative data points for training, thereby reducing the volume of data needed while accelerating the learning process. While active learning research mainly focuses on data annotation, we call for a network-centric active learning framework that considers both annotation (i.e., what is the label) and data acquisition (i.e., which and how many samples to collect). Moreover, we explore the synergy between generative artificial intelligence (AI) and active learning to overcome existing limitations in both active learning and generative AI. This paper also features a case study on a mmWave throughput prediction problem to demonstrate the practical benefits and improved performance of active learning for 6G networks. Furthermore, we discuss how the implications of active learning extend to numerous 6G network use cases. We highlight the potential of active learning based 6G networks to enhance computational efficiency, data annotation and acquisition efficiency, adaptability, and overall network intelligence. We conclude with a discussion on challenges and future research directions for active learning in 6G networks, including development of novel query strategies, distributed learning integration, and inclusion of human- and machine-in-the-loop learning.

Conghao Zhou, Jie Gao, Mushu Li et al.

In this paper, we design a 3D map management scheme for edge-assisted mobile augmented reality (MAR) to support the pose estimation of individual MAR device, which uploads camera frames to an edge server. Our objective is to minimize the pose estimation uncertainty of the MAR device by periodically selecting a proper set of camera frames for uploading to update the 3D map. To address the challenges of the dynamic uplink data rate and the time-varying pose of the MAR device, we propose a digital twin (DT)-based approach to 3D map management. First, a DT is created for the MAR device, which emulates 3D map management based on predicting subsequent camera frames. Second, a model-based reinforcement learning (MBRL) algorithm is developed, utilizing the data collected from both the actual and the emulated data to manage the 3D map. With extensive emulated data provided by the DT, the MBRL algorithm can quickly provide an adaptive map management policy in a highly dynamic environment. Simulation results demonstrate that the proposed DT-based 3D map management outperforms benchmark schemes by achieving lower pose estimation uncertainty and higher data efficiency in dynamic environments.

Sheng Yue, Ju Ren, Jiang Xin et al.

Federated meta-learning (FML) has emerged as a promising paradigm to cope with the data limitation and heterogeneity challenges in today's edge learning arena. However, its performance is often limited by slow convergence and corresponding low communication efficiency. In addition, since the available radio spectrum and IoT devices' energy capacity are usually insufficient, it is crucial to control the resource allocation and energy consumption when deploying FML in practical wireless networks. To overcome the challenges, in this paper, we rigorously analyze each device's contribution to the global loss reduction in each round and develop an FML algorithm (called NUFM) with a non-uniform device selection scheme to accelerate the convergence. After that, we formulate a resource allocation problem integrating NUFM in multi-access wireless systems to jointly improve the convergence rate and minimize the wall-clock time along with energy cost. By deconstructing the original problem step by step, we devise a joint device selection and resource allocation strategy to solve the problem with theoretical guarantees. Further, we show that the computational complexity of NUFM can be reduced from $O(d^2)$ to $O(d)$ (with the model dimension $d$) via combining two first-order approximation techniques. Extensive simulation results demonstrate the effectiveness and superiority of the proposed methods in comparison with existing baselines.

Wen Wu, Conghao Zhou, Mushu Li et al.

With the global roll-out of the fifth generation (5G) networks, it is necessary to look beyond 5G and envision the 6G networks. The 6G networks are expected to have space-air-ground integrated networks, advanced network virtualization, and ubiquitous intelligence. This article presents an artificial intelligence (AI)-native network slicing architecture for 6G networks to enable the synergy of AI and network slicing, thereby facilitating intelligent network management and supporting emerging AI services. AI-based solutions are first discussed across network slicing lifecycle to intelligently manage network slices, i.e., AI for slicing. Then, network slicing solutions are studied to support emerging AI services by constructing AI instances and performing efficient resource management, i.e., slicing for AI. Finally, a case study is presented, followed by a discussion of open research issues that are essential for AI-native network slicing in 6G networks.

Wen Wu, Nan Chen, Conghao Zhou et al.

In this paper, we investigate a radio access network (RAN) slicing problem for Internet of vehicles (IoV) services with different quality of service (QoS) requirements, in which multiple logically-isolated slices are constructed on a common roadside network infrastructure. A dynamic RAN slicing framework is presented to dynamically allocate radio spectrum and computing resource, and distribute computation workloads for the slices. To obtain an optimal RAN slicing policy for accommodating the spatial-temporal dynamics of vehicle traffic density, we first formulate a constrained RAN slicing problem with the objective to minimize long-term system cost. This problem cannot be directly solved by traditional reinforcement learning (RL) algorithms due to complicated coupled constraints among decisions. Therefore, we decouple the problem into a resource allocation subproblem and a workload distribution subproblem, and propose a two-layer constrained RL algorithm, named Resource Allocation and Workload diStribution (RAWS) to solve them. Specifically, an outer layer first makes the resource allocation decision via an RL algorithm, and then an inner layer makes the workload distribution decision via an optimization subroutine. Extensive trace-driven simulations show that the RAWS effectively reduces the system cost while satisfying QoS requirements with a high probability, as compared with benchmarks.

Wen Wu, Nan Cheng, Ning Zhang et al.

Beam alignment (BA) is to ensure the transmitter and receiver beams are accurately aligned to establish a reliable communication link in millimeter-wave (mmwave) systems. Existing BA methods search the entire beam space to identify the optimal transmit-receive beam pair, which incurs significant BA latency on the order of seconds in the worst case. In this paper, we develop a learning algorithm to reduce BA latency, namely Hierarchical Beam Alignment (HBA) algorithm. We first formulate the BA problem as a stochastic multi-armed bandit problem with the objective to maximize the cumulative received signal strength within a certain period. The proposed algorithm takes advantage of the correlation structure among beams such that the information from nearby beams is extracted to identify the optimal beam, instead of searching the entire beam space. Furthermore, the prior knowledge on the channel fluctuation is incorporated in the proposed algorithm to further accelerate the BA process. Theoretical analysis indicates that the proposed algorithm is asymptotically optimal. Extensive simulation results demonstrate that the proposed algorithm can identify the optimal beam with a high probability and reduce the BA latency from hundreds of milliseconds to a few milliseconds in the multipath channel, as compared to the existing BA method in IEEE 802.11ad.

Shaohe Lv, Yong Lu, Mianxiong Dong et al.

Human-machine systems required a deep understanding of human behaviors. Most existing research on action recognition has focused on discriminating between different actions, however, the quality of executing an action has received little attention thus far. In this paper, we study the quality assessment of driving behaviors and present WiQ, a system to assess the quality of actions based on radio signals. This system includes three key components, a deep neural network based learning engine to extract the quality information from the changes of signal strength, a gradient based method to detect the signal boundary for an individual action, and an activitybased fusion policy to improve the recognition performance in a noisy environment. By using the quality information, WiQ can differentiate a triple body status with an accuracy of 97%, while for identification among 15 drivers, the average accuracy is 88%. Our results show that, via dedicated analysis of radio signals, a fine-grained action characterization can be achieved, which can facilitate a large variety of applications, such as smart driving assistants.