Monisha Ghosh

Joshua Roy Palathinkal, Hardani Ismu Nabil, Muhammad Iqbal Rochman et al.

The recently deployed 6 GHz spectrum in the U.S. utilizes distinct power categories, with the latest proposed "Geofenced Variable Power" (GVP) category permitting indoor and outdoor operations without continuous Automated Frequency Coordination (AFC) by relying instead on local databases of exclusion zones. Consequently, the safe operation of GVP devices depends entirely on reliable GNSS localization to respect these geofences. However, GNSS accuracy is highly variable and significantly degrades in environments like urban canyons or indoors. This paper presents the first comprehensive empirical study evaluating GNSS reliability specifically for GVP compliance. Utilizing the SigCap Android application, we document and compare GNSS accuracy across an extensive array of real-world conditions, encompassing urban versus suburban landscapes, varying mobility states (stationary, walking, driving), and indoor versus outdoor settings. The results demonstrate that while device hardware causes variations in GNSS accuracy, the operational environment is the primary driver of error. Indoor settings and dense urban areas consistently degrade localization. Moreover, outdoor positions adjacent to buildings often surprisingly produce significant inaccuracies, even near low-elevation structures. We further analyze the contribution of different GNSS constellations to device positioning and show that satellites from non-U.S.-licensed constellations-although currently used in a substantial portion of location fixes-are not permitted for regulatory geolocation under FCC requirements.

Armed Tusha, Joshua Roy Palathinkal, Monisha Ghosh

Spatial domain exploitation through 3D beamforming serves as a critical technology enabler for performance enhancement in the Fifth Generation New Radio (5G NR) specification. This is realized at the gNodeB (gNB) through the integration of massive antenna element arrays that facilitates 3D spatial multiplexing. However, these systems with high-directional transmissions also represent a threat to incumbent services such as radar and satellites. These incumbents already operate in midband spectrum\textemdash{}including the 4.4-4.9 GHz and 7.125-7.4 GHz bands\textemdash{}that are currently being evaluated for future cellular deployments. Here, we present the first work that evaluates the transmitted Effective Isotropic Radiated Power (EIRP) of a gNB in 3D space, using the 3GPP Release-18 standard for FR-1 instead of theoretical analyses of beam nulling, which can be simplistic. We shed light on the problems requiring attention with the EIRP profile in 3D space for existing codebook designs predefined in 3GPP: i) interference from a gNB does not depend only on the worst-case beamforming direction, but on a variety of beamforming directions due to side-lobes; ii) advanced antenna systems (AAS) architecture and antenna port configurations play a crucial role in average 3D EIRP, which are implementation dependent, and iii) we introduce two beam nulling methods, which achieve a 11 dB power reduction toward a target direction, with 3.5-4.5 dB SNR loss in UE link performance at a 10^{-4} bit error rate (BER) across modulation schemes under ideal and practical channel estimation, a higher loss compared to predictions from theoretical analyses.

Hossein Nasiri, Seda Dogan-Tusha, Muhammad Iqbal Rochman et al.

Robust classification of the operational environment of wireless devices is becoming increasingly important for wireless network optimization, particularly in a shared spectrum environment. Distinguishing between indoor and outdoor devices can enhance reliability and improve coexistence with existing, outdoor, incumbents. For instance, the unlicensed but shared 6 GHz band (5.925 - 7.125 GHz) enables sharing by imposing lower transmit power for indoor unlicensed devices and a spectrum coordination requirement for outdoor devices. Further, indoor devices are prohibited from using battery power, external antennas, and weatherization to prevent outdoor operations. As these rules may be circumvented, we propose a robust indoor/outdoor classification method by leveraging the fact that the radio-frequency environment faced by a device are quite different indoors and outdoors. We first collect signal strength data from all cellular and Wi-Fi bands that can be received by a smartphone in various environments (indoor interior, indoor near windows, and outdoors), along with GPS accuracy, and then evaluate three machine learning (ML) methods: deep neural network (DNN), decision tree, and random forest to perform classification into these three categories. Our results indicate that the DNN model performs the best, particularly in minimizing the most important classification error, that of classifying outdoor devices as indoor interior devices.

S. M. Haider Ali Shuvo, Hardani Ismu Nabil, Joshua Roy Palathinkal et al.

Uplink performance remains a critical limitation in modern 5G networks, where UEs have to balance limited transmission power against propagation challenges. We conducted extensive measurements in the University of Notre Dame's football stadium, which has a seating capacity of 80,000 spectators, evaluating network behavior under both unloaded (pregame) and severely congested (game day) conditions, with a focus on uplink performance. Analyzing PHY-layer metrics captured via the Rohde & Schwarz QualiPoc, we show that high-frequency TDD bands in the uplink are severely bottlenecked in both the spectral and temporal domains. Despite transmitting near maximum 3GPP power limits, propagation loss inherent to high-frequency bands restricts UEs to low MCS indices and low PRB allocations, even in unloaded networks. This inability to achieve wideband allocation is further compounded by the significantly smaller number of uplink slots compared to downlink slots in TDD frames. Consequently, we observe a severe disparity between uplink and downlink: while high-frequency TDD bands carry the majority of downlink throughput, the network relies heavily on lower-frequency FDD bands for uplink. Additional measurements under favorable propagation conditions around a Verizon COW deployment located in the stadium parking lot also show that this limitation is not solely propagation-driven; rather, the duplexing scheme itself also plays a significant role. Even when TDD bands achieve higher or comparable MCS, FDD bands have a performance edge in the uplink due to the restrictive, downlink-heavy TDD architecture. These findings emphasize the indispensable role of low-frequency FDD spectrum in sustaining uplink capacity, providing insights that will help guide the design of next-generation wireless networks.

Hossein Nasiri, Muhammad Iqbal Rochman, Monisha Ghosh

The desirability of the mid-band frequency range (1 - 10 GHz) for federal and commercial applications, combined with the growing applications for commercial indoor use-cases, such as factory automation, opens up a new approach to spectrum sharing: the same frequency bands used outdoors by federal incumbents can be reused by commercial indoor users. A recent example of such sharing, between commercial systems, is the 6 GHz band (5.925 - 7.125 GHz) where unlicensed, low-power-indoor (LPI) users share the band with outdoor incumbents, primarily fixed microwave links. However, to date, there exist no reliable, automatic means of determining whether a device is indoors or outdoors, necessitating the use of other mechanisms such as mandating indoor access points (APs) to have integrated antennas and not be battery powered, and reducing transmit power of client devices which may be outdoors. An accurate indoor/outdoor (I/O) classification addresses these challenges, enabling automatic transmit power adjustments without interfering with incumbents. To this end, we leverage the Global Navigation Satellite System (GNSS) signals for I/O classification. GNSS signals, designed inherently for outdoor reception and highly susceptible to indoor attenuation and blocking, provide a robust and distinguishing feature for environmental sensing. We develop various methodologies, including threshold-based techniques and machine learning approaches and evaluate them using an expanded dataset gathered from diverse geographical locations. Our results demonstrate that GNSS-based methods alone can achieve greater accuracy than approaches relying solely on wireless (Wi-Fi) data, particularly in unfamiliar locations. Furthermore, the integration of GNSS data with Wi-Fi information leads to improved classification accuracy, showcasing the significant benefits of multi-modal data fusion.

Adam Dziedzic, Vanlin Sathya, Muhammad Iqbal Rochman et al.

The application of Machine Learning (ML) techniques to complex engineering problems has proved to be an attractive and efficient solution. ML has been successfully applied to several practical tasks like image recognition, automating industrial operations, etc. The promise of ML techniques in solving non-linear problems influenced this work which aims to apply known ML techniques and develop new ones for wireless spectrum sharing between Wi-Fi and LTE in the unlicensed spectrum. In this work, we focus on the LTE-Unlicensed (LTE-U) specification developed by the LTE-U Forum, which uses the duty-cycle approach for fair coexistence. The specification suggests reducing the duty cycle at the LTE-U base-station (BS) when the number of co-channel Wi-Fi basic service sets (BSSs) increases from one to two or more. However, without decoding the Wi-Fi packets, detecting the number of Wi-Fi BSSs operating on the channel in real-time is a challenging problem. In this work, we demonstrate a novel ML-based approach which solves this problem by using energy values observed during the LTE-U OFF duration. It is relatively straightforward to observe only the energy values during the LTE-U BS OFF time compared to decoding the entire Wi-Fi packet, which would require a full Wi-Fi receiver at the LTE-U base-station. We implement and validate the proposed ML-based approach by real-time experiments and demonstrate that there exist distinct patterns between the energy distributions between one and many Wi-Fi AP transmissions. The proposed ML-based approach results in a higher accuracy (close to 99\% in all cases) as compared to the existing auto-correlation (AC) and energy detection (ED) approaches.

Vanlin Sathya, Adam Dziedzic, Monisha Ghosh et al.

According to the LTE-U Forum specification, a LTE-U base-station (BS) reduces its duty cycle from 50% to 33% when it senses an increase in the number of co-channel Wi-Fi basic service sets (BSSs) from one to two. The detection of the number of Wi-Fi BSSs that are operating on the channel in real-time, without decoding the Wi-Fi packets, still remains a challenge. In this paper, we present a novel machine learning (ML) approach that solves the problem by using energy values observed during LTE-U OFF duration. Observing the energy values (at LTE-U BS OFF time) is a much simpler operation than decoding the entire Wi-Fi packets. In this work, we implement and validate the proposed ML based approach in real-time experiments, and demonstrate that there are two distinct patterns between one and two Wi-Fi APs. This approach delivers an accuracy close to 100% compared to auto-correlation (AC) and energy detection (ED) approaches.