Roberto Galeazzi

Antoine Thibault Vié, Leonid Fridman, Roberto Galeazzi et al.

In digital sliding mode control implementations, discretization-induced chattering and inter-sample blindness can severely degrade the closed-loop performance, especially in case of fast perturbations. This paper addresses these challenges for a discrete-time implementation of the super-twisting sliding mode controller. Building upon recent results on barrier-function-modulated super-twisting algorithms, a nested architecture employing multiple barriers is discretized using an eigenvalue-based exact matching approach. The resulting discrete-time controller preserves the adaptive and robustness properties established in continuous time, while ensuring consistent stability behavior at the sampling level. The proposed framework is validated through numerical simulations. The results highlight the effectiveness of multi-layer barrier adaptation for discrete-time sliding mode control applications.

Xinyi Liu, Mohammadreza Fani Sani, Zewei Zhou et al.

Despite rapid progress in autonomous robotics, executing complex or long-horizon tasks remains a fundamental challenge. Most current approaches follow an open-loop paradigm with limited reasoning and no feedback, resulting in poor robustness to environmental changes and severe error accumulation. We present RoboPilot, a dual-thinking closed-loop framework for robotic manipulation that supports adaptive reasoning for complex tasks in real-world dynamic environments. RoboPilot leverages primitive actions for structured task planning and flexible action generation, while introducing feedback to enable replanning from dynamic changes and execution errors. Chain-of-Thought reasoning further enhances high-level task planning and guides low-level action generation. The system dynamically switches between fast and slow thinking to balance efficiency and accuracy. To systematically evaluate the robustness of RoboPilot in diverse robot manipulation scenarios, we introduce RoboPilot-Bench, a benchmark spanning 21 tasks across 10 categories, including infeasible-task recognition and failure recovery. Experiments show that RoboPilot outperforms state-of-the-art baselines by 25.9\% in task success rate, and the real-world deployment on an industrial robot further demonstrates its robustness in real-world settings.

Dimitrios Dagdilelis, Panagiotis Grigoriadis, Roberto Galeazzi

We propose a cross attention transformer based method for multimodal sensor fusion to build a birds eye view of a vessels surroundings supporting safer autonomous marine navigation. The model deeply fuses multiview RGB and long wave infrared images with sparse LiDAR point clouds. Training also integrates X band radar and electronic chart data to inform predictions. The resulting view provides a detailed reliable scene representation improving navigational accuracy and robustness. Real world sea trials confirm the methods effectiveness even in adverse weather and complex maritime settings.

Dimitrios Dagdilelis, Mogens Blanke, Rasmus Hjorth Andersen et al.

Cyber-resilience is an increasing concern in developing autonomous navigation solutions for marine vessels. This paper scrutinizes cyber-resilience properties of marine navigation through a prism with three edges: multiple sensor information fusion, diagnosis of not-normal behaviours, and change detection. It proposes a two-stage estimator for diagnosis and mitigation of sensor signals used for coastal navigation. Developing a Likelihood Field approach, a first stage extracts shoreline features from radar and matches them to the electronic navigation chart. A second stage associates buoy and beacon features from the radar with chart information. Using real data logged at sea tests combined with simulated spoofing, the paper verifies the ability to timely diagnose and isolate an attempt to compromise position measurements. A new approach is suggested for high level processing of received data to evaluate their consistency, that is agnostic to the underlying technology of the individual sensory input. A combined parametric Gaussian modelling and Kernel Density Estimation is suggested and compared with a generalized likelihood ratio change detector that uses sliding windows. The paper shows how deviations from nominal behaviour and isolation of the components is possible when under attack or when defects in sensors occur.

Thomas T. Enevoldsen, Roberto Galeazzi

The paper presents a novel learning-based sampling strategy that guarantees rejection-free sampling of the free space under both biased and approximately uniform conditions, leveraging multivariate kernel densities. Historical data from a given autonomous system is leveraged to estimate a non-parametric probabilistic description of the domain, which also describes the free space where feasible solutions of the motion planning problem are likely to be found. The tuning parameters of the kernel density estimator, the bandwidth and the kernel, are used to alter the description of the free space so that no samples can fall outside the originally defined space.The proposed method is demonstrated in two real-life case studies: An autonomous surface vessel (2D) and an autonomous drone (3D). Two planning problems are solved, showing that the proposed approximately uniform sampling scheme is capable of guaranteeing rejection-free samples of the considered workspace. Furthermore, the effectiveness of the proposed method is statistically validated using Monte Carlo simulations.

Thomas T. Enevoldsen, Roberto Galeazzi

The paper presents a path planning algorithm based on RRT* that addresses the risk of grounding during evasive manoeuvres to avoid collision. The planner achieves this objective by integrating a collective navigation experience with the systematic use of water depth information from the electronic navigational chart. Multivariate kernel density estimation is applied to historical AIS data to generate a probabilistic model describing seafarer's best practices while sailing in confined waters. This knowledge is then encoded into the RRT* cost function to penalize path deviations that would lead own ship to sail in shallow waters. Depth contours satisfying the own ship draught define the actual navigable area, and triangulation of this non-convex region is adopted to enable uniform sampling. This ensures the optimal path deviation.

Thomas Thuesen Enevoldsen, Christopher Reinartz, Roberto Galeazzi

The paper proposes novel sampling strategies to compute the optimal path alteration of a surface vessel sailing in close quarters. Such strategy directly encodes the rules for safe navigation at sea, by exploiting the concept of minimal ship domain to determine the compliant region where the path deviation is to be generated. The sampling strategy is integrated within the optimal rapidly-exploring random tree algorithm, which minimizes the length of the path deviation. Further, the feasibility of the path with respect to the steering characteristics of own ship is verified by ensuring that the position of the new waypoints respects the minimum turning radius of the vessel. The proposed sampling strategy brings a significant performance improvement both in terms of optimal cost, computational speed and convergence rate.