Mostafa Ibrahim

Hieu Le, Oguz Bedir, Mostafa Ibrahim et al.

Reconfigurable Intelligent Surfaces (RIS) are pivotal for next-generation smart radio environments, yet their practical deployment is severely bottlenecked by the intractable computational overhead of Channel State Information (CSI) estimation. To bypass this fundamental physical-layer barrier, we propose an AI-native, data-driven paradigm that replaces complex channel modeling with spatial intelligence. This paper presents a fully autonomous Multi-Agent Reinforcement Learning (MARL) framework to control mechanically adjustable metallic reflector arrays. By mapping high-dimensional mechanical constraints to a reduced-order virtual focal point space, we deploy a Centralized Training with Decentralized Execution (CTDE) architecture. Using Multi-Agent Proximal Policy Optimization (MAPPO), our decentralized agents learn cooperative beam-focusing strategies relying on user coordinates, achieving CSI-free operation. High-fidelity ray-tracing simulations in dynamic non-line-of-sight (NLOS) environments demonstrate that this multi-agent approach rapidly adapts to user mobility, yielding up to a 26.86 dB enhancement over static flat reflectors and outperforming single-agent and hardware-constrained DRL baselines in both spatial selectivity and temporal stability. Crucially, the learned policies exhibit good deployment resilience, sustaining stable signal coverage even under 1.0-meter localization noise. These results validate the efficacy of MARL-driven spatial abstractions as a scalable, highly practical pathway toward AI-empowered wireless networks.

Hieu Le, Mostafa Ibrahim, Oguz Bedir et al.

Reconfigurable Intelligent Surfaces (RIS) has a potential to engineer smart radio environments for next-generation millimeter-wave (mmWave) networks. However, the prohibitive computational overhead of Channel State Information (CSI) estimation and the dimensionality explosion inherent in centralized optimization severely hinder practical large-scale deployments. To overcome these bottlenecks, we introduce a ``CSI-free" paradigm powered by a Hierarchical Multi-Agent Reinforcement Learning (HMARL) architecture to control mechanically reconfigurable reflective surfaces. By substituting pilot-based channel estimation with accessible user localization data, our framework leverages spatial intelligence for macro-scale wave propagation management. The control problem is decomposed into a two-tier neural architecture: a high-level controller executes temporally extended, discrete user-to-reflector allocations, while low-level controllers autonomously optimize continuous focal points utilizing Multi-Agent Proximal Policy Optimization (MAPPO) under a Centralized Training with Decentralized Execution (CTDE) scheme. Comprehensive deterministic ray-tracing evaluations demonstrate that this hierarchical framework achieves massive RSSI improvements of up to 7.79 dB over centralized baselines. Furthermore, the system exhibits robust multi-user scalability and maintains highly resilient beam-focusing performance under practical sub-meter localization tracking errors. By eliminating CSI overhead while maintaining high-fidelity signal redirection, this work establishes a scalable and cost-effective blueprint for intelligent wireless environments.

Oguz Bedir, Nurullah Sevim, Mostafa Ibrahim et al.

Recent breakthroughs in natural language processing show that attention mechanism in Transformer networks, trained via masked-token prediction, enables models to capture the semantic context of the tokens and internalize the grammar of language. While the application of Transformers to communication systems is a burgeoning field, the notion of context within physical waveforms remains under-explored. This paper addresses that gap by re-examining inter-symbol contribution (ISC) caused by pulse-shaping overlap. Rather than treating ISC as a nuisance, we view it as a deterministic source of contextual information embedded in oversampled complex baseband signals. We propose Masked Symbol Modeling (MSM), a framework for the physical (PHY) layer inspired by Bidirectional Encoder Representations from Transformers methodology. In MSM, a subset of symbol aligned samples is randomly masked, and a Transformer predicts the missing symbol identifiers using the surrounding "in-between" samples. Through this objective, the model learns the latent syntax of complex baseband waveforms. We illustrate MSM's potential by applying it to the task of demodulating signals corrupted by impulsive noise, where the model infers corrupted segments by leveraging the learned context. Our results suggest a path toward receivers that interpret, rather than merely detect communication signals, opening new avenues for context-aware PHY layer design.

Nurullah Sevim, Mostafa Ibrahim, Sabit Ekin

The advent of Large Language Models (LLMs) has revolutionized language understanding and human-like text generation, drawing interest from many other fields with this question in mind: What else are the LLMs capable of? Despite their widespread adoption, ongoing research continues to explore new ways to integrate LLMs into diverse systems. This paper explores new techniques to harness the power of LLMs for 6G (6th Generation) wireless communication technologies, a domain where automation and intelligent systems are pivotal. The inherent adaptability of LLMs to domain-specific tasks positions them as prime candidates for enhancing wireless systems in the 6G landscape. We introduce a novel Reinforcement Learning (RL) based framework that leverages LLMs for network deployment in wireless communications. Our approach involves training an RL agent, utilizing LLMs as its core, in an urban setting to maximize coverage. The agent's objective is to navigate the complexities of urban environments and identify the network parameters for optimal area coverage. Additionally, we integrate LLMs with Convolutional Neural Networks (CNNs) to capitalize on their strengths while mitigating their limitations. The Deep Deterministic Policy Gradient (DDPG) algorithm is employed for training purposes. The results suggest that LLM-assisted models can outperform CNN-based models in some cases while performing at least as well in others.

Hieu Le, Oguz Bedir, Mostafa Ibrahim et al.

Reconfigurable Intelligent Surfaces promise to transform wireless environments, yet practical deployment is hindered by the prohibitive overhead of Channel State Information (CSI) estimation and the dimensionality explosion inherent in centralized optimization. This paper proposes a Hierarchical Multi-Agent Reinforcement Learning (HMARL) framework for the control of mechanically reconfigurable reflective surfaces in millimeter-wave (mmWave) systems. We introduce a "CSI-free" paradigm that substitutes pilot-based channel estimation with readily available user localization data. To manage the massive combinatorial action space, the proposed architecture utilizes Multi-Agent Proximal Policy Optimization (MAPPO) under a Centralized Training with Decentralized Execution (CTDE) paradigm. The proposed architecture decomposes the control problem into two abstraction levels: a high-level controller for user-to-reflector allocation and decentralized low-level controllers for low-level focal point optimization. Comprehensive ray-tracing evaluations demonstrate that the framework achieves 2.81-7.94 dB RSSI improvements over centralized baselines, with the performance advantage widening as system complexity increases. Scalability analysis reveals that the system maintains sustained efficiency, exhibiting minimal per-user performance degradation and stable total power utilization even when user density doubles. Furthermore, robustness validation confirms the framework's viability across varying reflector aperture sizes (45-99 tiles) and demonstrates graceful performance degradation under localization errors up to 0.5 m. By eliminating CSI overhead while maintaining high-fidelity beam-focusing, this work establishes HMARL as a practical solution for intelligent mmWave environments.

Mostafa Ibrahim, Kevin Bryson

This project aims to break down large pathology images into small tiles and then cluster those tiles into distinct groups without the knowledge of true labels, our analysis shows how difficult certain aspects of clustering tumorous and non-tumorous cells can be and also shows that comparing the results of different unsupervised approaches is not a trivial task. The project also provides a software package to be used by the digital pathology community, that uses some of the approaches developed to perform unsupervised unsupervised tile classification, which could then be easily manually labelled. The project uses a mixture of techniques ranging from classical clustering algorithms such as K-Means and Gaussian Mixture Models to more complicated feature extraction techniques such as deep Autoencoders and Multi-loss learning. Throughout the project, we attempt to set a benchmark for evaluation using a few measures such as completeness scores and cluster plots. Throughout our results we show that Convolutional Autoencoders manages to slightly outperform the rest of the approaches due to its powerful internal representation learning abilities. Moreover, we show that Gaussian Mixture models produce better results than K-Means on average due to its flexibility in capturing different clusters. We also show the huge difference in the difficulties of classifying different types of pathology textures.