Jinhao Liang

Jinhao Liang, Sven Koenig, Ferdinando Fioretto

Decentralized multi-robot motion planning requires each robot to generate collision-free trajectories from local observations, without global sensing or reliable communication. However, most existing planners, whether classical or learning-based, generate trajectories from a static snapshot of the local observation, which limits their ability to anticipate the future behavior of neighboring robots. This limitation is critical as the number of robots increases and the environment becomes more cluttered. To overcome this challenge, this paper introduces Simulation-Informed Diffusion (SID), a decentralized framework built on constraint-aware diffusion models (CADM). SID first uses CADM to simulate the future trajectories of neighboring robots from their currently observed states, and then uses the same CADM to plan each robot's own trajectory under safety constraints informed by these simulations. Crucially, the accurate simulation of neighbors enables a minimal communication scheme that triggers coordination only when necessary in highly congested scenarios. Experiments across diverse environments show that SID consistently outperforms baseline methods in terms of planning effectiveness and constraint satisfaction, and scales to scenarios with 108 robots and 160 obstacles.

Jinhao Liang, Jacob K Christopher, Sven Koenig et al.

Recent advances in diffusion models hold significant potential in robotics, enabling the generation of diverse and smooth trajectories directly from raw representations of the environment. Despite this promise, applying diffusion models to motion planning remains challenging due to their difficulty in enforcing critical constraints, such as collision avoidance and kinematic feasibility. These limitations become even more pronounced in Multi-Robot Motion Planning (MRMP), where multiple robots must coordinate in shared spaces. To address these challenges, this work proposes Simultaneous MRMP Diffusion (SMD), a novel approach integrating constrained optimization into the diffusion sampling process to produce collision-free, kinematically feasible trajectories. Additionally, the paper introduces a comprehensive MRMP benchmark to evaluate trajectory planning algorithms across scenarios with varying robot densities, obstacle complexities, and motion constraints. Experimental results show SMD consistently outperforms classical and other learning-based motion planners, achieving higher success rates and efficiency in complex multi-robot environments.

Jacob K. Christopher, Michael Cardei, Jinhao Liang et al.

Despite the remarkable generative capabilities of diffusion models, their integration into safety-critical or scientifically rigorous applications remains hindered by the need to ensure compliance with stringent physical, structural, and operational constraints. To address this challenge, this paper introduces Neuro-Symbolic Diffusion (NSD), a novel framework that interleaves diffusion steps with symbolic optimization, enabling the generation of certifiably consistent samples under user-defined functional and logic constraints. This key feature is provided for both standard and discrete diffusion models, enabling, for the first time, the generation of both continuous (e.g., images and trajectories) and discrete (e.g., molecular structures and natural language) outputs that comply with constraints. This ability is demonstrated on tasks spanning three key challenges: (1) Safety, in the context of non-toxic molecular generation and collision-free trajectory optimization; (2) Data scarcity, in domains such as drug discovery and materials engineering; and (3) Out-of-domain generalization, where enforcing symbolic constraints allows adaptation beyond the training distribution.

Prince Zizhuang Wang, Jinhao Liang, Shuyi Chen et al.

Decision-focused learning (DFL) integrates predictive models with downstream optimization, directly training machine learning models to minimize decision errors. While DFL has been shown to provide substantial advantages when compared to a counterpart that treats the predictive and prescriptive models separately, it has also been shown to struggle in high-dimensional and risk-sensitive settings, limiting its applicability in real-world settings. To address this limitation, this paper introduces decision-focused generative learning (Gen-DFL), a novel framework that leverages generative models to adaptively model uncertainty and improve decision quality. Instead of relying on fixed uncertainty sets, Gen-DFL learns a structured representation of the optimization parameters and samples from the tail regions of the learned distribution to enhance robustness against worst-case scenarios. This approach mitigates over-conservatism while capturing complex dependencies in the parameter space. The paper shows, theoretically, that Gen-DFL achieves improved worst-case performance bounds compared to traditional DFL. Empirically, it evaluates Gen-DFL on various scheduling and logistics problems, demonstrating its strong performance against existing DFL methods.

Jinhao Liang, Jacob K. Christopher, Sven Koenig et al.

Multi-Agent Path Finding (MAPF) is a fundamental problem in robotics, requiring the computation of collision-free paths for multiple agents moving from their respective start to goal positions. Coordinating multiple agents in a shared environment poses significant challenges, especially in continuous spaces where traditional optimization algorithms struggle with scalability. Moreover, these algorithms often depend on discretized representations of the environment, which can be impractical in image-based or high-dimensional settings. Recently, diffusion models have shown promise in single-agent path planning, capturing complex trajectory distributions and generating smooth paths that navigate continuous, high-dimensional spaces. However, directly extending diffusion models to MAPF introduces new challenges since these models struggle to ensure constraint feasibility, such as inter-agent collision avoidance. To overcome this limitation, this work proposes a novel approach that integrates constrained optimization with diffusion models for MAPF in continuous spaces. This unique combination directly produces feasible multi-agent trajectories that respect collision avoidance and kinematic constraints. The effectiveness of our approach is demonstrated across various challenging simulated scenarios of varying dimensionality.

Jinhao Liang, Sven Koenig, Ferdinando Fioretto

Multi-Robot Motion Planning (MRMP) involves generating collision-free trajectories for multiple robots operating in a shared continuous workspace. While discrete multi-agent path finding (MAPF) methods are broadly adopted due to their scalability, their coarse discretization severely limits trajectory quality. In contrast, continuous optimization-based planners offer higher-quality paths but suffer from the curse of dimensionality, resulting in poor scalability with respect to the number of robots. This paper tackles the limitations of these two approaches by introducing a novel framework that integrates discrete MAPF solvers with constrained generative diffusion models. The resulting framework, called Discrete-Guided Diffusion (DGD), has three key characteristics: (1) it decomposes the original nonconvex MRMP problem into tractable subproblems with convex configuration spaces, (2) it combines discrete MAPF solutions with constrained optimization techniques to guide diffusion models capture complex spatiotemporal dependencies among robots, and (3) it incorporates a lightweight constraint repair mechanism to ensure trajectory feasibility. The proposed method sets a new state-of-the-art performance in large-scale, complex environments, scaling to 100 robots while achieving planning efficiency and high success rates.

Jinhao Liang, Yixuan Sun, Anirban Samaddar et al.

Generative models excel at synthesizing high-fidelity samples from complex data distributions, but they often violate hard constraints arising from physical laws or task specifications. A common remedy is to project intermediate samples onto the feasible set; however, repeated projection can distort the learned distribution and induce a mismatch with the data manifold. Thus, recent multi-stage procedures attempt to defer projection to clean samples during sampling, but they increase algorithmic complexity and accumulate errors across steps. This paper addresses these challenges by proposing a novel training-free method, Chance-constrained Flow Matching (CCFM), that integrates stochastic optimization into the sampling process, enabling effective enforcement of hard constraints while maintaining high-fidelity sample generation. Importantly, CCFM guarantees feasibility in the same manner as conventional repeated projection, yet, despite operating directly on noisy intermediate samples, it is theoretically equivalent to projecting onto the feasible set defined by clean samples. This yields a sampler that mitigates distributional distortion. Empirical experiments show that CCFM outperforms current state-of-the-art constrained generative models in modeling complex physical systems governed by partial differential equations and molecular docking problems, delivering higher feasibility and fidelity.