Samad Ali

Mehdi Letafati, Samad Ali, Matti Latva-aho

In this paper, conditional denoising diffusion probabilistic models (DDPMs) are proposed to enhance the data transmission and reconstruction over wireless channels. The underlying mechanism of DDPM is to decompose the data generation process over the so-called "denoising" steps. Inspired by this, the key idea is to leverage the generative prior of diffusion models in learning a "noisy-to-clean" transformation of the information signal to help enhance data reconstruction. The proposed scheme could be beneficial for communication scenarios in which a prior knowledge of the information content is available, e.g., in multimedia transmission. Hence, instead of employing complicated channel codes that reduce the information rate, one can exploit diffusion priors for reliable data reconstruction, especially under extreme channel conditions due to low signal-to-noise ratio (SNR), or hardware-impaired communications. The proposed DDPM-assisted receiver is tailored for the scenario of wireless image transmission using MNIST dataset. Our numerical results highlight the reconstruction performance of our scheme compared to the conventional digital communication, as well as the deep neural network (DNN)-based benchmark. It is also shown that more than 10 dB improvement in the reconstruction could be achieved in low SNR regimes, without the need to reduce the information rate for error correction.

Mehdi Letafati, Samad Ali, Matti Latva-aho

A comprehensive study on the applications of denoising diffusion models for wireless systems is provided. The article highlights the capabilities of diffusion models in learning complicated signal distributions, modeling wireless channels, and denoising and reconstructing distorted signals. First, fundamental working mechanism of diffusion models is introduced. Then the recent advances in applying diffusion models to wireless systems are reviewed. Next, two case studies are provided, where conditional diffusion models (CDiff) are proposed for data reconstruction enhancement, covering both the conventional digital communication systems, as well as the semantic communication (SemCom) setups. The first case study highlights about 10 dB improvement in data reconstruction under low-SNR regimes, while mitigating the need to transmit redundant bits for error correction codes in digital systems. The second study further extends the case to a SemCom setup, where diffusion autoencoders showcase superior performance compared to legacy autoencoders and variational autoencoder (VAE) architectures. Finally, future directions and existing challenges are discussed.

Mehdi Letafati, Samad Ali, Matti Latva-aho

Diffusion models are at the vanguard of generative AI research with renowned solutions such as ImageGen by Google Brain and DALL.E 3 by OpenAI. Nevertheless, the potential merits of diffusion models for communication engineering applications are not fully understood yet. In this paper, we aim to unleash the power of generative AI for PHY design of constellation symbols in communication systems. Although the geometry of constellations is predetermined according to networking standards, e.g., quadrature amplitude modulation (QAM), probabilistic shaping can design the probability of occurrence (generation) of constellation symbols. This can help improve the information rate and decoding performance of communication systems. We exploit the ``denoise-and-generate'' characteristics of denoising diffusion probabilistic models (DDPM) for probabilistic constellation shaping. The key idea is to learn generating constellation symbols out of noise, ``mimicking'' the way the receiver performs symbol reconstruction. This way, we make the constellation symbols sent by the transmitter, and what is inferred (reconstructed) at the receiver become as similar as possible, resulting in as few mismatches as possible. Our results show that the generative AI-based scheme outperforms deep neural network (DNN)-based benchmark and uniform shaping, while providing network resilience as well as robust out-of-distribution performance under low-SNR regimes and non-Gaussian assumptions. Numerical evaluations highlight 30% improvement in terms of cosine similarity and a threefold improvement in terms of mutual information compared to DNN-based approach for 64-QAM geometry.

Fahri Wisnu Murti, Samad Ali, Matti Latva-aho

Multi-access Edge Computing (MEC) can be implemented together with Open Radio Access Network (O-RAN) over commodity platforms to offer low-cost deployment and bring the services closer to end-users. In this paper, a joint O-RAN/MEC orchestration using a Bayesian deep reinforcement learning (RL)-based framework is proposed that jointly controls the O-RAN functional splits, the allocated resources and hosting locations of the O-RAN/MEC services across geo-distributed platforms, and the routing for each O-RAN/MEC data flow. The goal is to minimize the long-term overall network operation cost and maximize the MEC performance criterion while adapting possibly time-varying O-RAN/MEC demands and resource availability. This orchestration problem is formulated as Markov decision process (MDP). However, the system consists of multiple BSs that share the same resources and serve heterogeneous demands, where their parameters have non-trivial relations. Consequently, finding the exact model of the underlying system is impractical, and the formulated MDP renders in a large state space with multi-dimensional discrete action. To address such modeling and dimensionality issues, a novel model-free RL agent is proposed for our solution framework. The agent is built from Double Deep Q-network (DDQN) that tackles the large state space and is then incorporated with action branching, an action decomposition method that effectively addresses the multi-dimensional discrete action with linear increase complexity. Further, an efficient exploration-exploitation strategy under a Bayesian framework using Thomson sampling is proposed to improve the learning performance and expedite its convergence. Trace-driven simulations are performed using an O-RAN-compliant model. The results show that our approach is data-efficient (i.e., converges faster) and increases the returned reward by 32\% than its non-Bayesian version.

Mehdi Letafati, Samad Ali, Matti Latva-aho

Semantic communication (SemCom) systems aim to learn the mapping from low-dimensional semantics to high-dimensional ground-truth. While this is more akin to a "domain translation" problem, existing frameworks typically emphasize on channel-adaptive neural encoding-decoding schemes, lacking full exploration of signal distribution. Moreover, such methods so far have employed autoencoder-based architectures, where the encoding is tightly coupled to a matched decoder, causing scalability issues in practice. To address these gaps, diffusion autoencoder models are proposed for wireless SemCom. The goal is to learn a "semantic-to-clean" mapping, from the semantic space to the ground-truth probability distribution. A neural encoder at semantic transmitter extracts the high-level semantics, and a conditional diffusion model (CDiff) at the semantic receiver exploits the source distribution for signal-space denoising, while the received semantic latents are incorporated as the conditioning input to "steer" the decoding process towards the semantics intended by the transmitter. It is analytically proved that the proposed decoder model is a consistent estimator of the ground-truth data. Furthermore, extensive simulations over CIFAR-10 and MNIST datasets are provided along with design insights, highlighting the performance compared to legacy autoencoders and variational autoencoders (VAE). Simulations are further extended to the multi-user SemCom, identifying the dominating factors in a more realistic setup.

Thushan Sivalingam, Samad Ali, Nurul Huda Mahmood et al.

Grant-free random access and uplink non-orthogonal multiple access (NOMA) have been introduced to reduce transmission latency and signaling overhead in massive machine-type communication (mMTC). In this paper, we propose two novel group-based deep neural network active user detection (AUD) schemes for the grant-free sparse code multiple access (SCMA) system in mMTC uplink framework. The proposed AUD schemes learn the nonlinear mapping, i.e., multi-dimensional codebook structure and the channel characteristic. This is accomplished through the received signal which incorporates the sparse structure of device activity with the training dataset. Moreover, the offline pre-trained model is able to detect the active devices without any channel state information and prior knowledge of the device sparsity level. Simulation results show that with several active devices, the proposed schemes obtain more than twice the probability of detection compared to the conventional AUD schemes over the signal to noise ratio range of interest.

Thulitha Senevirathna, Bathiya Thennakoon, Tharindu Sankalpa et al.

Source traffic prediction is one of the main challenges of enabling predictive resource allocation in machine type communications (MTC). In this paper, a Long Short-Term Memory (LSTM) based deep learning approach is proposed for event-driven source traffic prediction. The source traffic prediction problem can be formulated as a sequence generation task where the main focus is predicting the transmission states of machine-type devices (MTDs) based on their past transmission data. This is done by restructuring the transmission data in a way that the LSTM network can identify the causal relationship between the devices. Knowledge of such a causal relationship can enable event-driven traffic prediction. The performance of the proposed approach is studied using data regarding events from MTDs with different ranges of entropy. Our model outperforms existing baseline solutions in saving resources and accuracy with a margin of around 9%. Reduction in Random Access (RA) requests by our model is also analyzed to demonstrate the low amount of signaling required as a result of our proposed LSTM based source traffic prediction approach.

Aidin Ferdowsi, Samad Ali, Walid Saad et al.

Autonomous connected vehicles (ACVs) rely on intra-vehicle sensors such as camera and radar as well as inter-vehicle communication to operate effectively. This reliance on cyber components exposes ACVs to cyber and physical attacks in which an adversary can manipulate sensor readings and physically take control of an ACV. In this paper, a comprehensive framework is proposed to thwart cyber and physical attacks on ACV networks. First, an optimal safe controller for ACVs is derived to maximize the street traffic flow while minimizing the risk of accidents by optimizing ACV speed and inter-ACV spacing. It is proven that the proposed controller is robust to physical attacks which aim at making ACV systems instable. To improve the cyber-physical security of ACV systems, next, data injection attack (DIA) detection approaches are proposed to address cyber attacks on sensors and their physical impact on the ACV system. To comprehensively design the DIA detection approaches, ACV sensors are characterized in two subsets based on the availability of a-priori information about their data. For sensors having a prior information, a DIA detection approach is proposed and an optimal threshold level is derived for the difference between the actual and estimated values of sensors data which enables ACV to stay robust against cyber attacks. For sensors having no prior information, a novel multi-armed bandit (MAB) algorithm is proposed to enable ACV to securely control its motion. Simulation results show that the proposed optimal safe controller outperforms current state of the art controllers by maximizing the robustness of ACVs to physical attacks. The results also show that the proposed DIA detection approaches, compared to Kalman filtering, can improve the security of ACV sensors against cyber attacks and ultimately improve the physical robustness of an ACV system.