Rubing Huang

Qi Dong, Rubing Huang, Chenhui Cui et al.

Short-Term Electricity-Load Forecasting (STELF) refers to the prediction of the immediate demand (in the next few hours to several days) for the power system. Various external factors, such as weather changes and the emergence of new electricity consumption scenarios, can impact electricity demand, causing load data to fluctuate and become non-linear, which increases the complexity and difficulty of STELF. In the past decade, deep learning has been applied to STELF, modeling and predicting electricity demand with high accuracy, and contributing significantly to the development of STELF. This paper provides a comprehensive survey on deep-learning-based STELF over the past ten years. It examines the entire forecasting process, including data pre-processing, feature extraction, deep-learning modeling and optimization, and results evaluation. This paper also identifies some research challenges and potential research directions to be further investigated in future work.

Zixiang Xian, Rubing Huang, Dave Towey et al.

Artificial intelligence (AI) has revolutionized software engineering (SE) by enhancing software development efficiency. The advent of pre-trained models (PTMs) leveraging transfer learning has significantly advanced AI for SE. However, existing PTMs that operate on individual code tokens suffer from several limitations: They are costly to train and fine-tune; and they rely heavily on labeled data for fine-tuning on task-specific datasets. In this paper, we present TransformCode, a novel framework that learns code embeddings in a contrastive learning manner. Our framework is encoder-agnostic and language-agnostic, which means that it can leverage any encoder model and handle any programming language. We also propose a novel data-augmentation technique called abstract syntax tree (AST) transformation, which applies syntactic and semantic transformations to the original code snippets, to generate more diverse and robust samples for contrastive learning. Our framework has several advantages over existing methods: (1) It is flexible and adaptable, because it can easily be extended to other downstream tasks that require code representation (such as code-clone detection and classification); (2) it is efficient and scalable, because it does not require a large model or a large amount of training data, and it can support any programming language; (3) it is not limited to unsupervised learning, but can also be applied to some supervised learning tasks by incorporating task-specific labels or objectives; and (4) it can also adjust the number of encoder parameters based on computing resources. We evaluate our framework on several code-related tasks, and demonstrate its effectiveness and superiority over the state-of-the-art methods such as SourcererCC, Code2vec, and InferCode.

Chenhui Cui, Tao Li, Junjie Wang et al.

Mobile apps have become essential, making quality assurance increasingly important. GUI testing is widely used for automated exploration, yet text-input components remain a major obstacle, as many UI pages require semantically appropriate text inputs before proceeding. Large Language Models have shown promise in generating context-aware text, but the effectiveness of different UI representations, feedback mechanisms, and human intervention remains unclear. This paper presents a large-scale empirical study addressing these gaps. We evaluate nine state-of-the-art LLMs across 115 real-world apps, comparing three UI-context prompting settings: extracted textual context, UI-hierarchy XML, and screenshot-based vision input. Results show extracted context and XML achieve comparable page-pass-through rates of 71.4% and 71.0%, while vision-based input reaches 65.1% but incurs substantially higher token costs. In bug-detection experiments with 37 real-world text-input bugs, LLMs generating invalid inputs detect about 51% of issues across all evaluated models. A feedback-enhanced protocol, incorporating execution outcomes into subsequent attempts, improves average PPTRs to 69.2-73.8% and raises bug-detection rates to 51.0-64.5%. Human testers further refine inputs, yielding additional gains. We integrate the process into DroidBot, augmenting its UI-exploration capabilities. We derive actionable insights on context selection, cost-effectiveness, feedback strategies, and human-LLM collaboration, advancing both knowledge and practice in Android testing.

Zixiang Xian, Chenhui Cui, Rubing Huang et al.

The advent of large language models (LLMs) has significantly advanced artificial intelligence (AI) in software engineering (SE), with source code embeddings playing a crucial role in tasks such as source code clone detection and source code clustering. However, existing methods for source code embedding, including those based on LLMs, often rely on costly supervised training or fine-tuning for domain adaptation. This paper proposes a novel approach to embedding source code by combining large language and sentence embedding models. This approach attempts to eliminate the need for task-specific training or fine-tuning and to effectively address the issue of erroneous information commonly found in LLM-generated outputs. To evaluate the performance of our proposed approach, we conducted a series of experiments on three datasets with different programming languages by considering various LLMs and sentence embedding models. The experimental results have demonstrated the effectiveness and superiority of our approach over the state-of-the-art unsupervised approaches, such as SourcererCC, Code2vec, InferCode, TransformCode, and LLM2Vec. Our findings highlight the potential of our approach to advance the field of SE by providing robust and efficient solutions for source code embedding tasks.

Quanxing Xu, Ling Zhou, Feifei Zhang et al.

Large Language Models (LLMs) have become a crucial tool in Visual Question Answering (VQA) for handling knowledge-intensive questions in few-shot or zero-shot scenarios. However, their reliance on massive training datasets often causes them to inherit language biases during the acquisition of knowledge. This limitation imposes two key constraints on existing methods: (1) LLM predictions become less reliable due to bias exploitation, and (2) despite strong knowledge reasoning capabilities, LLMs still struggle with out-of-distribution (OOD) generalization. To address these issues, we propose Object Attribute Description Promoter (OAD-Promoter), a novel approach for enhancing LLM-based VQA by mitigating language bias and improving domain-shift robustness. OAD-Promoter comprises three components: the Object-concentrated Example Generation (OEG) module, the Memory Knowledge Assistance (MKA) module, and the OAD Prompt. The OEG module generates global captions and object-concentrated samples, jointly enhancing visual information input to the LLM and mitigating bias through complementary global and regional visual cues. The MKA module assists the LLM in handling OOD samples by retrieving relevant knowledge from stored examples to support questions from unseen domains. Finally, the OAD Prompt integrates the outputs of the preceding modules to optimize LLM inference. Experiments demonstrate that OAD-Promoter significantly improves the performance of LLM-based VQA methods in few-shot or zero-shot settings, achieving new state-of-the-art results.

Chenhui Cui, Zixiang Xian, Danyu Li et al.

Android applications are organized around activities that provide visual Graphical User Interface (GUI) containers that host the UI and handle user interaction events. Activity Transition Graphs (ATGs) have been widely used to model apps' GUI navigation. However, the construction of high-quality ATGs is challenging: ATGs based on static analysis may miss acceptable transitions and may extract infeasible ones; while dynamically explored ATGs can yield incomplete transitions. Recent learning-based approaches can treat ATG construction as a seed-supervised link-prediction task. However, the use of activity-layout and widget-trigger information for ATG construction remains limited. We propose ATGBuilder, a feature-assisted graph-learning approach for seed-supervised ATG construction. ATGBuilder uses a Large Language Model (LLM) to summarize UI activity metadata from layouts into compact textual functionality summaries. ATGBuilder explicitly models widget-trigger information into the edge attribute: It then uses an auxiliary widget-attribute reconstruction objective on this information during model training. ATGBuilder's performance was evaluated across a series of ablations on the frontmatter corpus, and an experiment on benchmark using manually-checked ground-truth ATGs. Experiments on multiple benchmarks show that ATGBuilder significantly outperforms state-of-the-art methods. We further demonstrate its effectiveness by improving automated GUI exploration tools through better navigation guidance.

Quanxing Xu, Ling Zhou, Xian Zhong et al.

Existing debiasing approaches in Visual Question Answering (VQA) primarily focus on enhancing visual learning, integrating auxiliary models, or employing data augmentation strategies. However, these methods exhibit two major drawbacks. First, current debiasing techniques fail to capture the superior relation between images and texts because prevalent learning frameworks do not enable models to extract deeper correlations from highly contrasting samples. Second, they do not assess the relevance between the input question and image during inference, as no prior work has examined the degree of input relevance in debiasing studies. Motivated by these limitations, we propose a novel framework, Optimized Question-Image Relation Learning (QIRL), which employs a generation-based self-supervised learning strategy. Specifically, two modules are introduced to address the aforementioned issues. The Negative Image Generation (NIG) module automatically produces highly irrelevant question-image pairs during training to enhance correlation learning, while the Irrelevant Sample Identification (ISI) module improves model robustness by detecting and filtering irrelevant inputs, thereby reducing prediction errors. Furthermore, to validate our concept of reducing output errors through filtering unrelated question-image inputs, we propose a specialized metric to evaluate the performance of the ISI module. Notably, our approach is model-agnostic and can be integrated with various VQA models. Extensive experiments on VQA-CPv2 and VQA-v2 demonstrate the effectiveness and generalization ability of our method. Among data augmentation strategies, our approach achieves state-of-the-art results.

Rubing Huang, Chenhui Cui, Dave Towey et al.

Adaptive Random Testing (ART) is an enhancement of Random Testing (RT), and aims to improve the RT failure-detection effectiveness by distributing test cases more evenly in the input domain. Many ART algorithms have been proposed, with Fixed-Size-Candidate-Set ART (FSCS-ART) being one of the most effective and popular. FSCS-ART ensures high failure-detection effectiveness by selecting the next test case as the candidate farthest from previously-executed test cases. Although FSCS-ART has good failure-detection effectiveness, it also faces some challenges, including heavy computational overheads. In this paper, we propose an enhanced version of FSCS-ART, Vantage Point Partitioning ART (VPP-ART). VPP-ART addresses the FSCS-ART computational overhead problem using vantage point partitioning, while maintaining the failure-detection effectiveness. VPP-ART partitions the input domain space using a modified Vantage Point tree (VP-tree) and finds the approximate nearest executed test cases of a candidate test case in the partitioned sub-domains -- thereby significantly reducing the time overheads compared with the searches required for FSCS-ART. To enable the FSCS-ART dynamic insertion process, we modify the traditional VP-tree to support dynamic data. The simulation results show that VPP-ART has a much lower time overhead compared to FSCS-ART, but also delivers similar (or better) failure-detection effectiveness, especially in the higher dimensional input domains. According to statistical analyses, VPP-ART can improve on the FSCS-ART failure-detection effectiveness by approximately 50% to 58%. VPP-ART also compares favorably with the KDFC-ART algorithms (a series of enhanced ART algorithms based on the KD-tree). Our experiments also show that VPP-ART is more cost-effective than FSCS-ART and KDFC-ART.

Rubing Huang, Weifeng Sun, Tsong Yueh Chen et al.

Failure region, where failure-causing inputs reside, has provided many insights to enhance testing effectiveness of many testing methods. Failure region may also provide some important information to support other processes such as software debugging. When a testing method detects a software failure, indicating that a failure-causing input is identified, the next important question is about how to identify the failure region based on this failure-causing input, i.e., Identification of Failure Regions (IFR). In this paper, we introduce a new IFR strategy, namely Search for Boundary (SB), to identify an approximate failure region of a numeric input domain. SB attempts to identify additional failure-causing inputs that are as close to the boundary of the failure region as possible. To support SB, we provide a basic procedure, and then propose two methods, namely Fixed-orientation Search for Boundary (FSB) and Diverse-orientation Search for Boundary (DSB). In addition, we implemented an automated experimentation platform to integrate these methods. In the experiments, we evaluated the proposed SB methods using a series of simulation studies andempirical studies with different types of failure regions. The results show that our methods can effectively identify a failure region, within the limited testing resources.

Rubing Huang, Weifeng Sun, Yinyin Xu et al.

Random testing (RT) is a well-studied testing method that has been widely applied to the testing of many applications, including embedded software systems, SQL database systems, and Android applications. Adaptive random testing (ART) aims to enhance RT's failure-detection ability by more evenly spreading the test cases over the input domain. Since its introduction in 2001, there have been many contributions to the development of ART, including various approaches, implementations, assessment and evaluation methods, and applications. This paper provides a comprehensive survey on ART, classifying techniques, summarizing application areas, and analyzing experimental evaluations. This paper also addresses some misconceptions about ART, and identifies open research challenges to be further investigated in the future work.

Rubing Huang, Quanjun Zhang, Dave Towey et al.

Regression test case prioritization (RTCP) aims to improve the rate of fault detection by executing more important test cases as early as possible. Various RTCP techniques have been proposed based on different coverage criteria. Among them, a majority of techniques leverage code coverage information to guide the prioritization process, with code units being considered individually, and in isolation. In this paper, we propose a new coverage criterion, code combinations coverage, that combines the concepts of code coverage and combination coverage. We apply this coverage criterion to RTCP, as a new prioritization technique, code combinations coverage based prioritization (CCCP). We report on empirical studies conducted to compare the testing effectiveness and efficiency of CCCP with four popular RTCP techniques: total, additional, adaptive random, and search-based test prioritization. The experimental results show that even when the lowest combination strength is assigned, overall, the CCCP fault detection rates are greater than those of the other four prioritization techniques. The CCCP prioritization costs are also found to be comparable to the additional test prioritization technique. Moreover, our results also show that when the combination strength is increased, CCCP provides higher fault detection rates than the state-of-the-art, regardless of the levels of code coverage.