13.4ETMay 29
GaMi: Geometry-Agnostic Material Identification via Cross-Modal Subtractive DisentanglementZhiwei Chen, Yijie Li, Yimo Zhang et al.
Non-contact material identification enables adaptive interaction for embodied intelligence yet faces challenges from geometry-induced variations (e.g., orientation, shape, distance) and single-modality ambiguities. In this paper, we present GaMi, a multimodal material identification system integrating mmWave and acoustic sensing to robustly operate under unconstrained geometric conditions. By leveraging the insight of shared geometric consistency between co-located bimodal sensors, GaMi employs an intra-sample cross-modal subtractive disentanglement framework. By semantically aligning modalities and subtracting the shared geometric context, it isolates intrinsic material features. Furthermore, GaMi incorporates inter-sample contrastive learning to correct the residual interference caused by cross-modal misalignment. Additionally, a pairing-based adaptation strategy between two modalities enables few-shot generalization across devices. Extensive evaluations on 20 materials show that GaMi achieves 95.2% accuracy, outperforming single-modality baselines across unseen geometric conditions.
EVA-CLIP-18B: Scaling CLIP to 18 Billion ParametersQuan Sun, Jinsheng Wang, Qiying Yu et al. · tsinghua
Scaling up contrastive language-image pretraining (CLIP) is critical for empowering both vision and multimodal models. We present EVA-CLIP-18B, the largest and most powerful open-source CLIP model to date, with 18-billion parameters. With only 6-billion training samples seen, EVA-CLIP-18B achieves an exceptional 80.7% zero-shot top-1 accuracy averaged across 27 widely recognized image classification benchmarks, outperforming its forerunner EVA-CLIP (5-billion parameters) and other open-source CLIP models by a large margin. Remarkably, we observe a consistent performance improvement with the model size scaling of EVA-CLIP, despite maintaining a constant training dataset of 2-billion image-text pairs from LAION-2B and COYO-700M. This dataset is openly available and much smaller than the in-house datasets (e.g., DFN-5B, WebLI-10B) employed in other state-of-the-art CLIP models. EVA-CLIP-18B demonstrates the potential of EVA-style weak-to-strong visual model scaling. With our model weights made publicly available, we hope to facilitate future research in vision and multimodal foundation models.
10.2CVMay 26, 2025
ReDDiT: Rehashing Noise for Discrete Visual GenerationTianren Ma, Xiaosong Zhang, Boyu Yang et al.
In the visual generative area, discrete diffusion models are gaining traction for their efficiency and compatibility. However, pioneered attempts still fall behind their continuous counterparts, which we attribute to noise (absorbing state) design and sampling heuristics. In this study, we propose a rehashing noise approach for discrete diffusion transformer (termed ReDDiT), with the aim to extend absorbing states and improve expressive capacity of discrete diffusion models. ReDDiT enriches the potential paths that latent variables traverse during training with randomized multi-index corruption. The derived rehash sampler, which reverses the randomized absorbing paths, guarantees high diversity and low discrepancy of the generation process. These reformulations lead to more consistent and competitive generation quality, mitigating the need for heavily tuned randomness. Experiments show that ReDDiT significantly outperforms the baseline model (reducing gFID from 6.18 to 1.61) and is on par with the continuous counterparts.
11.3CVJun 24, 2024
Do As I Do: Pose Guided Human Motion CopySifan Wu, Zhenguang Liu, Beibei Zhang et al.
Human motion copy is an intriguing yet challenging task in artificial intelligence and computer vision, which strives to generate a fake video of a target person performing the motion of a source person. The problem is inherently challenging due to the subtle human-body texture details to be generated and the temporal consistency to be considered. Existing approaches typically adopt a conventional GAN with an L1 or L2 loss to produce the target fake video, which intrinsically necessitates a large number of training samples that are challenging to acquire. Meanwhile, current methods still have difficulties in attaining realistic image details and temporal consistency, which unfortunately can be easily perceived by human observers. Motivated by this, we try to tackle the issues from three aspects: (1) We constrain pose-to-appearance generation with a perceptual loss and a theoretically motivated Gromov-Wasserstein loss to bridge the gap between pose and appearance. (2) We present an episodic memory module in the pose-to-appearance generation to propel continuous learning that helps the model learn from its past poor generations. We also utilize geometrical cues of the face to optimize facial details and refine each key body part with a dedicated local GAN. (3) We advocate generating the foreground in a sequence-to-sequence manner rather than a single-frame manner, explicitly enforcing temporal inconsistency. Empirical results on five datasets, iPER, ComplexMotion, SoloDance, Fish, and Mouse datasets, demonstrate that our method is capable of generating realistic target videos while precisely copying motion from a source video. Our method significantly outperforms state-of-the-art approaches and gains 7.2% and 12.4% improvements in PSNR and FID respectively.
6.8CRApr 11, 2019
Information Leakage in Encrypted Deduplication via Frequency Analysis: Attacks and DefensesJingwei Li, Patrick P. C. Lee, Chufeng Tan et al.
Encrypted deduplication combines encryption and deduplication to simultaneously achieve both data security and storage efficiency. State-of-the-art encrypted deduplication systems mainly build on deterministic encryption to preserve deduplication effectiveness. However, such deterministic encryption reveals the underlying frequency distribution of the original plaintext chunks. This allows an adversary to launch frequency analysis against the ciphertext chunks and infer the content of the original plaintext chunks. In this paper, we study how frequency analysis affects information leakage in encrypted deduplication storage, from both attack and defense perspectives. Specifically, we target backup workloads, and propose a new inference attack that exploits chunk locality to increase the coverage of inferred chunks. We further combine the new inference attack with the knowledge of chunk sizes and show its attack effectiveness against variable-size chunks. We conduct trace-driven evaluation on both real-world and synthetic datasets and show that our proposed attacks infer a significant fraction of plaintext chunks under backup workloads. To defend against frequency analysis, we present two defense approaches, namely MinHash encryption and scrambling. Our trace-driven evaluation shows that our combined MinHash encryption and scrambling scheme effectively mitigates the severity of the inference attacks, while maintaining high storage efficiency and incurring limited metadata access overhead.
19.4CRFeb 12, 2019
Adversarial Samples on Android Malware Detection Systems for IoT SystemsXiaolei Liu, Xiaojiang Du, Xiaosong Zhang et al.
Many IoT(Internet of Things) systems run Android systems or Android-like systems. With the continuous development of machine learning algorithms, the learning-based Android malware detection system for IoT devices has gradually increased. However, these learning-based detection models are often vulnerable to adversarial samples. An automated testing framework is needed to help these learning-based malware detection systems for IoT devices perform security analysis. The current methods of generating adversarial samples mostly require training parameters of models and most of the methods are aimed at image data. To solve this problem, we propose a \textbf{t}esting framework for \textbf{l}earning-based \textbf{A}ndroid \textbf{m}alware \textbf{d}etection systems(TLAMD) for IoT Devices. The key challenge is how to construct a suitable fitness function to generate an effective adversarial sample without affecting the features of the application. By introducing genetic algorithms and some technical improvements, our test framework can generate adversarial samples for the IoT Android Application with a success rate of nearly 100\% and can perform black-box testing on the system.
16.0CRJun 4, 2018
Privacy-preserving and Efficient Aggregation based on Blockchain for Power Grid Communications in Smart CommunitiesZhitao Guan, Guanlin Si, Xiaosong Zhang et al.
Intelligence is one of the most important aspects in the development of our future communities. Ranging from smart home, smart building, to smart city, all these smart infrastructures must be supported by intelligent power supply. Smart grid is proposed to solve all challenges of future electricity supply. In smart grid, in order to realize optimal scheduling, a Smart Meter (SM) is installed at each home to collect the near real-time electricity consumption data, which can be used by the utilities to offer better smart home services. However, the near real-time data may disclose user's privacy. An adversary may track the application usage patterns by analyzing the user's electricity consumption profile. In this paper, we propose a privacy-preserving and efficient data aggregation scheme. We divide users into different groups and each group has a private blockchain to record its members' data. To preserve the inner privacy within a group, we use pseudonym to hide user's identity, and each user may create multiple pseudonyms and associate his/her data with different pseudonyms. In addition, the bloom filter is adopted for fast authentication. The analysis shows that the proposed scheme can meet the security requirements, and achieve a better performance than other popular methods.
20.0CRDec 18, 2017
An Adaptive Gas Cost Mechanism for Ethereum to Defend Against Under-Priced DoS AttacksTing Chen, Xiaoqi Li, Ying Wang et al.
The gas mechanism in Ethereum charges the execution of every operation to ensure that smart contracts running in EVM (Ethereum Virtual Machine) will be eventually terminated. Failing to properly set the gas costs of EVM operations allows attackers to launch DoS attacks on Ethereum. Although Ethereum recently adjusted the gas costs of EVM operations to defend against known DoS attacks, it remains unknown whether the new setting is proper and how to configure it to defend against unknown DoS attacks. In this paper, we make the first step to address this challenging issue by first proposing an emulation-based framework to automatically measure the resource consumptions of EVM operations. The results reveal that Ethereum's new setting is still not proper. Moreover, we obtain an insight that there may always exist exploitable under-priced operations if the cost is fixed. Hence, we propose a novel gas cost mechanism, which dynamically adjusts the costs of EVM operations according to the number of executions, to thwart DoS attacks. This method punishes the operations that are executed much more frequently than before and lead to high gas costs. To make our solution flexible and secure and avoid frequent update of Ethereum client, we design a special smart contract that collaborates with the updated EVM for dynamic parameter adjustment. Experimental results demonstrate that our method can effectively thwart both known and unknown DoS attacks with flexible parameter settings. Moreover, our method only introduces negligible additional gas consumption for benign users.
31.2SEMar 11, 2017
Under-Optimized Smart Contracts Devour Your MoneyTing Chen, Xiaoqi Li, Xiapu Luo et al.
Smart contracts are full-fledged programs that run on blockchains (e.g., Ethereum, one of the most popular blockchains). In Ethereum, gas (in Ether, a cryptographic currency like Bitcoin) is the execution fee compensating the computing resources of miners for running smart contracts. However, we find that under-optimized smart contracts cost more gas than necessary, and therefore the creators or users will be overcharged. In this work, we conduct the first investigation on Solidity, the recommended compiler, and reveal that it fails to optimize gas-costly programming patterns. In particular, we identify 7 gas-costly patterns and group them to 2 categories. Then, we propose and develop GASPER, a new tool for automatically locating gas-costly patterns by analyzing smart contracts' bytecodes. The preliminary results on discovering 3 representative patterns from 4,240 real smart contracts show that 93.5%, 90.1% and 80% contracts suffer from these 3 patterns, respectively.