Xu Tan

Xu Tan, Junqi Chen, Sylwan Rahardja et al.

Weakly-supervised anomaly detection can outperform existing unsupervised methods with the assistance of a very small number of labeled anomalies, which attracts increasing attention from researchers. However, existing weakly-supervised anomaly detection methods are limited as these methods do not factor in the multimodel nature of the real-world data distribution. To mitigate this, we propose the Weakly-supervised Variational-mixture-model-based Anomaly Detector (WVAD). WVAD excels in multimodal datasets. It consists of two components: a deep variational mixture model, and an anomaly score estimator. The deep variational mixture model captures various features of the data from different clusters, then these features are delivered to the anomaly score estimator to assess the anomaly levels. Experimental results on three real-world datasets demonstrate WVAD's superiority.

Zhen Ye, Wei Xue, Xu Tan et al.

Denoising diffusion probabilistic models (DDPMs) have shown promising performance for speech synthesis. However, a large number of iterative steps are required to achieve high sample quality, which restricts the inference speed. Maintaining sample quality while increasing sampling speed has become a challenging task. In this paper, we propose a "Co"nsistency "Mo"del-based "Speech" synthesis method, CoMoSpeech, which achieve speech synthesis through a single diffusion sampling step while achieving high audio quality. The consistency constraint is applied to distill a consistency model from a well-designed diffusion-based teacher model, which ultimately yields superior performances in the distilled CoMoSpeech. Our experiments show that by generating audio recordings by a single sampling step, the CoMoSpeech achieves an inference speed more than 150 times faster than real-time on a single NVIDIA A100 GPU, which is comparable to FastSpeech2, making diffusion-sampling based speech synthesis truly practical. Meanwhile, objective and subjective evaluations on text-to-speech and singing voice synthesis show that the proposed teacher models yield the best audio quality, and the one-step sampling based CoMoSpeech achieves the best inference speed with better or comparable audio quality to other conventional multi-step diffusion model baselines. Audio samples are available at https://comospeech.github.io/.

Yichong Leng, Xu Tan, Rui Wang et al.

Error correction is widely used in automatic speech recognition (ASR) to post-process the generated sentence, and can further reduce the word error rate (WER). Although multiple candidates are generated by an ASR system through beam search, current error correction approaches can only correct one sentence at a time, failing to leverage the voting effect from multiple candidates to better detect and correct error tokens. In this work, we propose FastCorrect 2, an error correction model that takes multiple ASR candidates as input for better correction accuracy. FastCorrect 2 adopts non-autoregressive generation for fast inference, which consists of an encoder that processes multiple source sentences and a decoder that generates the target sentence in parallel from the adjusted source sentence, where the adjustment is based on the predicted duration of each source token. However, there are some issues when handling multiple source sentences. First, it is non-trivial to leverage the voting effect from multiple source sentences since they usually vary in length. Thus, we propose a novel alignment algorithm to maximize the degree of token alignment among multiple sentences in terms of token and pronunciation similarity. Second, the decoder can only take one adjusted source sentence as input, while there are multiple source sentences. Thus, we develop a candidate predictor to detect the most suitable candidate for the decoder. Experiments on our inhouse dataset and AISHELL-1 show that FastCorrect 2 can further reduce the WER over the previous correction model with single candidate by 3.2% and 2.6%, demonstrating the effectiveness of leveraging multiple candidates in ASR error correction. FastCorrect 2 achieves better performance than the cascaded re-scoring and correction pipeline and can serve as a unified post-processing module for ASR.

Mingjian Chen, Xu Tan, Bohan Li et al.

Custom voice, a specific text to speech (TTS) service in commercial speech platforms, aims to adapt a source TTS model to synthesize personal voice for a target speaker using few speech data. Custom voice presents two unique challenges for TTS adaptation: 1) to support diverse customers, the adaptation model needs to handle diverse acoustic conditions that could be very different from source speech data, and 2) to support a large number of customers, the adaptation parameters need to be small enough for each target speaker to reduce memory usage while maintaining high voice quality. In this work, we propose AdaSpeech, an adaptive TTS system for high-quality and efficient customization of new voices. We design several techniques in AdaSpeech to address the two challenges in custom voice: 1) To handle different acoustic conditions, we use two acoustic encoders to extract an utterance-level vector and a sequence of phoneme-level vectors from the target speech during training; in inference, we extract the utterance-level vector from a reference speech and use an acoustic predictor to predict the phoneme-level vectors. 2) To better trade off the adaptation parameters and voice quality, we introduce conditional layer normalization in the mel-spectrogram decoder of AdaSpeech, and fine-tune this part in addition to speaker embedding for adaptation. We pre-train the source TTS model on LibriTTS datasets and fine-tune it on VCTK and LJSpeech datasets (with different acoustic conditions from LibriTTS) with few adaptation data, e.g., 20 sentences, about 1 minute speech. Experiment results show that AdaSpeech achieves much better adaptation quality than baseline methods, with only about 5K specific parameters for each speaker, which demonstrates its effectiveness for custom voice. Audio samples are available at https://speechresearch.github.io/adaspeech/.

Linghui Meng, Jin Xu, Xu Tan et al.

In this paper, we propose MixSpeech, a simple yet effective data augmentation method based on mixup for automatic speech recognition (ASR). MixSpeech trains an ASR model by taking a weighted combination of two different speech features (e.g., mel-spectrograms or MFCC) as the input, and recognizing both text sequences, where the two recognition losses use the same combination weight. We apply MixSpeech on two popular end-to-end speech recognition models including LAS (Listen, Attend and Spell) and Transformer, and conduct experiments on several low-resource datasets including TIMIT, WSJ, and HKUST. Experimental results show that MixSpeech achieves better accuracy than the baseline models without data augmentation, and outperforms a strong data augmentation method SpecAugment on these recognition tasks. Specifically, MixSpeech outperforms SpecAugment with a relative PER improvement of 10.6$\%$ on TIMIT dataset, and achieves a strong WER of 4.7$\%$ on WSJ dataset.

Chen Zhang, Yi Ren, Xu Tan et al.

While neural-based text to speech (TTS) models can synthesize natural and intelligible voice, they usually require high-quality speech data, which is costly to collect. In many scenarios, only noisy speech of a target speaker is available, which presents challenges for TTS model training for this speaker. Previous works usually address the challenge using two methods: 1) training the TTS model using the speech denoised with an enhancement model; 2) taking a single noise embedding as input when training with noisy speech. However, they usually cannot handle speech with real-world complicated noise such as those with high variations along time. In this paper, we develop DenoiSpeech, a TTS system that can synthesize clean speech for a speaker with noisy speech data. In DenoiSpeech, we handle real-world noisy speech by modeling the fine-grained frame-level noise with a noise condition module, which is jointly trained with the TTS model. Experimental results on real-world data show that DenoiSpeech outperforms the previous two methods by 0.31 and 0.66 MOS respectively.

Xu Tan, Xiao-Lei Zhang

Robust voice activity detection (VAD) is a challenging task in low signal-to-noise (SNR) environments. Recent studies show that speech enhancement is helpful to VAD, but the performance improvement is limited. To address this issue, here we propose a speech enhancement aided end-to-end multi-task model for VAD. The model has two decoders, one for speech enhancement and the other for VAD. The two decoders share the same encoder and speech separation network. Unlike the direct thought that takes two separated objectives for VAD and speech enhancement respectively, here we propose a new joint optimization objective -- VAD-masked scale-invariant source-to-distortion ratio (mSI-SDR). mSI-SDR uses VAD information to mask the output of the speech enhancement decoder in the training process. It makes the VAD and speech enhancement tasks jointly optimized not only at the shared encoder and separation network, but also at the objective level. It also satisfies real-time working requirement theoretically. Experimental results show that the multi-task method significantly outperforms its single-task VAD counterpart. Moreover, mSI-SDR outperforms SI-SDR in the same multi-task setting.

Jiawei Chen, Xu Tan, Jian Luan et al.

High-fidelity singing voices usually require higher sampling rate (e.g., 48kHz) to convey expression and emotion. However, higher sampling rate causes the wider frequency band and longer waveform sequences and throws challenges for singing voice synthesis (SVS) in both frequency and time domains. Conventional SVS systems that adopt small sampling rate cannot well address the above challenges. In this paper, we develop HiFiSinger, an SVS system towards high-fidelity singing voice. HiFiSinger consists of a FastSpeech based acoustic model and a Parallel WaveGAN based vocoder to ensure fast training and inference and also high voice quality. To tackle the difficulty of singing modeling caused by high sampling rate (wider frequency band and longer waveform), we introduce multi-scale adversarial training in both the acoustic model and vocoder to improve singing modeling. Specifically, 1) To handle the larger range of frequencies caused by higher sampling rate, we propose a novel sub-frequency GAN (SF-GAN) on mel-spectrogram generation, which splits the full 80-dimensional mel-frequency into multiple sub-bands and models each sub-band with a separate discriminator. 2) To model longer waveform sequences caused by higher sampling rate, we propose a multi-length GAN (ML-GAN) for waveform generation to model different lengths of waveform sequences with separate discriminators. 3) We also introduce several additional designs and findings in HiFiSinger that are crucial for high-fidelity voices, such as adding F0 (pitch) and V/UV (voiced/unvoiced flag) as acoustic features, choosing an appropriate window/hop size for mel-spectrogram, and increasing the receptive field in vocoder for long vowel modeling. Experiment results show that HiFiSinger synthesizes high-fidelity singing voices with much higher quality: 0.32/0.44 MOS gain over 48kHz/24kHz baseline and 0.83 MOS gain over previous SVS systems.

Renqian Luo, Xu Tan, Rui Wang et al.

Neural architecture search (NAS) relies on a good controller to generate better architectures or predict the accuracy of given architectures. However, training the controller requires both abundant and high-quality pairs of architectures and their accuracy, while it is costly to evaluate an architecture and obtain its accuracy. In this paper, we propose SemiNAS, a semi-supervised NAS approach that leverages numerous unlabeled architectures (without evaluation and thus nearly no cost). Specifically, SemiNAS 1) trains an initial accuracy predictor with a small set of architecture-accuracy data pairs; 2) uses the trained accuracy predictor to predict the accuracy of large amount of architectures (without evaluation); and 3) adds the generated data pairs to the original data to further improve the predictor. The trained accuracy predictor can be applied to various NAS algorithms by predicting the accuracy of candidate architectures for them. SemiNAS has two advantages: 1) It reduces the computational cost under the same accuracy guarantee. On NASBench-101 benchmark dataset, it achieves comparable accuracy with gradient-based method while using only 1/7 architecture-accuracy pairs. 2) It achieves higher accuracy under the same computational cost. It achieves 94.02% test accuracy on NASBench-101, outperforming all the baselines when using the same number of architectures. On ImageNet, it achieves 23.5% top-1 error rate (under 600M FLOPS constraint) using 4 GPU-days for search. We further apply it to LJSpeech text to speech task and it achieves 97% intelligibility rate in the low-resource setting and 15% test error rate in the robustness setting, with 9%, 7% improvements over the baseline respectively.

Hao Sun, Xu Tan, Jun-Wei Gan et al.

Grapheme-to-phoneme (G2P) conversion is an important task in automatic speech recognition and text-to-speech systems. Recently, G2P conversion is viewed as a sequence to sequence task and modeled by RNN or CNN based encoder-decoder framework. However, previous works do not consider the practical issues when deploying G2P model in the production system, such as how to leverage additional unlabeled data to boost the accuracy, as well as reduce model size for online deployment. In this work, we propose token-level ensemble distillation for G2P conversion, which can (1) boost the accuracy by distilling the knowledge from additional unlabeled data, and (2) reduce the model size but maintain the high accuracy, both of which are very practical and helpful in the online production system. We use token-level knowledge distillation, which results in better accuracy than the sequence-level counterpart. What is more, we adopt the Transformer instead of RNN or CNN based models to further boost the accuracy of G2P conversion. Experiments on the publicly available CMUDict dataset and an internal English dataset demonstrate the effectiveness of our proposed method. Particularly, our method achieves 19.88% WER on CMUDict dataset, outperforming the previous works by more than 4.22% WER, and setting the new state-of-the-art results.