A simple embedded discrete fracture-matrix model for a coupled flow and transport problem in porous media
This work provides a simple and flexible numerical model for simulating flow and transport in fractured porous media, which is important for subsurface reservoir engineering.
The authors developed a locally conservative velocity approximation and a lowest order upwind finite volume method for coupled flow and transport in fractured porous media using an embedded finite element method, demonstrating promising results on synthetic and realistic problems including a benchmark study for single-phase flow.
Accurate simulation of fluid flow and transport in fractured porous media is a key challenge in subsurface reservoir engineering. Due to the high ratio between its length and width, fractures can be modeled as lower dimensional interfaces embedded in the porous rock. We apply a recently developed embedded finite element method (EFEM) for the Darcy problem. This method allows for general fracture geometry, and the fractures may cut the finite element mesh arbitrarily. We present here a velocity model for EFEM and couple the Darcy problem to a transport problem for a passive solute. The main novelties of this work is a locally conservative velocity approximation derived from the EFEM solution, and the development of a lowest order upwind finite volume method for the transport problem. This numerical model is compatible with EFEM in the sense that the same computational mesh may be applied, so that we retain the same flexibility with respect to fracture geometry and meshing. Hence, our coupled solution strategy represents a simple approach in terms of formulation, implementation and meshing. We demonstrate our model by some numerical examples on both synthetic and realistic problems, including a benchmark study for single-phase flow. Despite the simplicity of the method, the results are promising.