PID2018 Benchmark Challenge: learning feedforward control
For control engineers, this work demonstrates that simple LFFC designs can enhance PID control on a specific benchmark problem.
The paper applies learning feedforward controllers (LFFC) to a refrigeration cycle model from the PID2018 Benchmark, achieving performance improvements of up to 69% relative to a multi-variable PID controller.
The design and application of learning feedforward controllers (LFFC) for the one-staged refrigeration cycle model described in the PID2018 Benchmark Challenge is presented, and its effectiveness is evaluated. The control system consists of two components: 1) a preset PID component and 2) a learning feedforward component which is a function approximator that is adapted on the basis of the feedback signal. A B-spline network based LFFC and a low-pass filter based LFFC are designed to track the desired outlet temperature of evaporator secondary flux and the superheating degree of refrigerant at evaporator outlet. Encouraging simulation results are included. Qualitative and quantitative comparison results evaluations show that, with little effort, a high-performance control system can be obtained with this approach. Our initial simple attempt of low-pass filter based LFFC and B-spline network based LFFC give J=0.4902 and J=0.6536 relative to the decentralized PID controller, respectively. Besides, the initial attempt of a combination controller of our optimized PI controller and low-pass filter LFFC gives J=0.6947 relative to the multi-variable PID controller.