Real-Time detection, classification and DOA estimation of Unmanned Aerial Vehicle
This addresses UAV surveillance for security or monitoring applications, but it appears incremental as it builds on existing array processing and classification methods.
The authors tackled the problem of real-time detection, classification, and direction-of-arrival estimation of unmanned aerial vehicles using a low-cost passive acoustic system, achieving effectiveness in preliminary experimental results.
The present work deals with a new passive system for real-time detection, classification and direction of arrival estimator of Unmanned Aerial Vehicles (UAVs). The proposed system composed of a very low cost hardware components, comprises two different arrays of three or six-microphones, non-linear amplification and filtering of the analog acoustic signal, avoiding also the saturation effect in case where the UAV is located nearby to the microphones. Advance array processing methods are used to detect and locate the wide-band sources in the near and far-field including array calibration and energy based beamforming techniques. Moreover, oversampling techniques are adopted to increase the acquired signals accuracy and to also decrease the quantization noise. The classifier is based on the nearest neighbor rule of a normalized Power Spectral Density, the acoustic signature of the UAV spectrum in short periods of time. The low-cost, low-power and high efficiency embedded processor STM32F405RG is used for system implementation. Preliminary experimental results have shown the effectiveness of the proposed approach.