Deployment of Aerial Robots after a major fire of an industrial hall with hazardous substances, a report
This is an incremental application of existing UAV and imaging methods to a specific disaster response scenario for emergency services.
The paper tackled the problem of using UAVs to survey a hazardous industrial fire site, resulting in the creation of a 3D model and an interactive panorama viewer to aid emergency services, though the 3D model alone was insufficient for information extraction.
This technical report is about the mission and the experience gained during the reconnaissance of an industrial hall with hazardous substances after a major fire in Berlin. During this operation, only UAVs and cameras were used to obtain information about the site and the building. First, a geo-referenced 3D model of the building was created in order to plan the entry into the hall. Subsequently, the UAVs were used to fly in the heavily damaged interior and take pictures from inside of the hall. A 360° camera mounted under the UAV was used to collect images of the surrounding area especially from sections that were difficult to fly into. Since the collected data set contained similar images as well as blurred images, it was cleaned from non-optimal images using visual SLAM, bundle adjustment and blur detection so that a 3D model and overviews could be calculated. It was shown that the emergency services were not able to extract the necessary information from the 3D model. Therefore, an interactive panorama viewer with links to other 360° images was implemented where the links to the other images depends on the semi dense point cloud and located camera positions of the visual SLAM algorithm so that the emergency forces could view the surroundings.