Non-linear stiffness behavior of planar serial robotic manipulators
This addresses stiffness analysis for robotic manipulators, offering incremental improvements in modeling buckling phenomena.
The paper tackled the problem of nonlinear stiffness behavior in multi-link serial planar manipulators under compressive loading, proving that buckling occurs beyond a critical force in straight configurations and detecting quasi-buckling in non-straight ones, with results illustrated using three- and four-link manipulator examples.
The paper focuses on the stiffness analysis of multi-link serial planar manipulators, which may demonstrate nonlinear stiffness behavior under the compressive loading. Two important cases are considered, where the manipulator has either a straight or non-straight initial configuration. It was proved that in the first case the loading may cause the buckling if it exceeds some critical value, and the manipulator suddenly changes its straight shape and stiffness properties. For computing this critical force, a general eigenvalue-based technique was proposed that can be applied to any multi-link serial manipulator. For the second case dealing with non-straight initial configurations, a universal energy-based technique was applied that allowed to detect quasi-buckling phenomenon when it is observed very fast but not instant change of the manipulator shape and its stiffness coefficient under the loading. These results are illustrated by numerous examples of non-linear stiffness behavior of three-and four-link manipulators that are subjected to compressive force.