Vision-Based Robust Lane Detection and Tracking under Different Challenging Environmental Conditions
This addresses lane detection for advanced driving assistance systems, but it is incremental as it builds on existing methods with specific improvements.
The paper tackles robust lane detection under challenging environmental conditions like adverse weather and occlusions, achieving an average detection rate of 97.55% and processing time of 22.33 msec/frame, outperforming state-of-the-art methods.
Lane marking detection is fundamental for both advanced driving assistance systems. However, detecting lane is highly challenging when the visibility of a road lane marking is low due to real-life challenging environment and adverse weather. Most of the lane detection methods suffer from four types of challenges: (i) light effects i.e., shadow, glare of light, reflection etc.; (ii) Obscured visibility of eroded, blurred, colored and cracked lane caused by natural disasters and adverse weather; (iii) lane marking occlusion by different objects from surroundings (wiper, vehicles etc.); and (iv) presence of confusing lane like lines inside the lane view e.g., guardrails, pavement marking, road divider etc. Here, we propose a robust lane detection and tracking method with three key technologies. First, we introduce a comprehensive intensity threshold range (CITR) to improve the performance of the canny operator in detecting low intensity lane edges. Second, we propose a two-step lane verification technique, the angle based geometric constraint (AGC) and length-based geometric constraint (LGC) followed by Hough Transform, to verify the characteristics of lane marking and to prevent incorrect lane detection. Finally, we propose a novel lane tracking technique, by defining a range of horizontal lane position (RHLP) along the x axis which will be updating with respect to the lane position of previous frame. It can keep track of the lane position when either left or right or both lane markings are partially and fully invisible. To evaluate the performance of the proposed method we used the DSDLDE [1] and SLD [2] dataset with 1080x1920 and 480x720 resolutions at 24 and 25 frames/sec respectively. Experimental results show that the average detection rate is 97.55%, and the average processing time is 22.33 msec/frame, which outperform the state of-the-art method.