Augmenting End-to-End Steering Angle Prediction with CAN Bus Data
This addresses cost reduction for autonomous vehicle companies by providing a cheaper alternative to LiDAR/radar sensor fusion.
The paper tackles the problem of improving steering angle prediction accuracy for autonomous vehicles without expensive LiDAR/radar sensors by fusing CAN bus data with video data, achieving a 20% reduction in prediction error (from RMSE 0.02492 to 0.01970) with some models showing up to 80% error reduction.
In recent years, end to end steering prediction for autonomous vehicles has become a major area of research. The primary method for achieving end to end steering was to use computer vision models on a live feed of video data. However, to further increase accuracy, many companies have added data from light detection and ranging (LiDAR) and or radar sensors through sensor fusion. However, the addition of lasers and sensors comes at a high financial cost. In this paper, I address both of these issues by increasing the accuracy of the computer vision models without the increased cost of using LiDAR and or sensors. I achieved this by improving the accuracy of computer vision models by sensor fusing CAN bus data, a vehicle protocol, with video data. CAN bus data is a rich source of information about the vehicle's state, including its speed, steering angle, and acceleration. By fusing this data with video data, the accuracy of the computer vision model's predictions can be improved. When I trained the model without CAN bus data, I obtained an RMSE of 0.02492, while the model trained with the CAN bus data achieved an RMSE of 0.01970. This finding indicates that fusing CAN Bus data with video data can reduce the computer vision model's prediction error by 20% with some models decreasing the error by 80%.