Meta-Adaptive Beam Search Planning for Transformer-Based Reinforcement Learning Control of UAVs with Overhead Manipulators under Flight Disturbances
This addresses the challenge of reliable tracking for UAVs with manipulators under disturbances, which is incremental as it builds on existing RL methods with a novel planner.
The paper tackled the problem of controlling drones with overhead manipulators under flight disturbances, which cause tracking difficulties due to coupled motion. The result was a reinforcement learning framework with a meta-adaptive beam search planner that achieved a 10.2% reward increase, reduced mean tracking error from about 6% to 3%, and improved a combined metric by 29.6% compared to a baseline.
Drones equipped with overhead manipulators offer unique capabilities for inspection, maintenance, and contact-based interaction. However, the motion of the drone and its manipulator is tightly linked, and even small attitude changes caused by wind or control imperfections shift the end-effector away from its intended path. This coupling makes reliable tracking difficult and also limits the direct use of learning-based arm controllers that were originally designed for fixed-base robots. These effects appear consistently in our tests whenever the UAV body experiences drift or rapid attitude corrections. To address this behavior, we develop a reinforcement-learning (RL) framework with a transformer-based double deep Q learning (DDQN), with the core idea of using an adaptive beam-search planner that applies a short-horizon beam search over candidate control sequences using the learned critic as the forward estimator. This allows the controller to anticipate the end-effector's motion through simulated rollouts rather than executing those actions directly on the actual model, realizing a software-in-the-loop (SITL) approach. The lookahead relies on value estimates from a Transformer critic that processes short sequences of states, while a DDQN backbone provides the one-step targets needed to keep the learning process stable. Evaluated on a 3-DoF aerial manipulator under identical training conditions, the proposed meta-adaptive planner shows the strongest overall performance with a 10.2% reward increase, a substantial reduction in mean tracking error (from about 6% to 3%), and a 29.6% improvement in the combined reward-error metric relative to the DDQN baseline. Our method exhibits elevated stability in tracking target tip trajectory (by maintaining 5 cm tracking error) when the drone base exhibits drifts due to external disturbances, as opposed to the fixed-beam and Transformer-only variants.