Wen-Tai Li

Wen-Tai Li, Chao-Kai Wen, Jung-Chieh Chen et al.

The use of phasor angle measurements provided by phasor measurement units (PMUs) in fault detection is regarded as a promising method in identifying locations of power line outages. However, communication errors or system malfunctions may introduce errors to the measurements and thus yield bad data. Most of the existing methods on line outage identification fail to consider such error. This paper develops a framework for identifying multiple power line outages based on the PMUs' measurements in the presence of bad data. In particular, we design an algorithm to identify locations of line outage and recover the faulty measurements simultaneously. The proposed algorithm does not require any prior information on the number of line outages and the noise variance. Case studies carried out on test systems of different sizes validate the effectiveness and efficiency of the proposed approach.

Jung-Chieh Chen, Hwei-Ming Chung, Chao-Kai Wen et al.

Efficient and accurate state estimation is essential for the optimal management of the future smart grid. However, to meet the requirements of deploying the future grid at a large scale, the state estimation algorithm must be able to accomplish two major tasks: (1) combining measurement data with different qualities to attain an optimal state estimate and (2) dealing with the large number of measurement data rendered by meter devices. To address these two tasks, we first propose a practical solution using a very short word length to represent a partial measurement of the system state in the meter device to reduce the amount of data. We then develop a unified probabilistic framework based on a Bayesian belief inference to incorporate measurements of different qualities to obtain an optimal state estimate. Simulation results demonstrate that the proposed scheme significantly outperforms other linear estimators in different test scenarios. These findings indicate that the proposed scheme not only has the ability to integrate data with different qualities but can also decrease the amount of data that needs to be transmitted and processed.

Xilei Dai, Ruotian Chen, Songze Guan et al.

Reinforcement learning (RL) has proven effective for AI-based building energy management. However, there is a lack of flexible framework to implement RL across various control problems in building energy management. To address this gap, we propose BuildingGym, an open-source tool designed as a research-friendly and flexible framework for training RL control strategies for common challenges in building energy management. BuildingGym integrates EnergyPlus as its core simulator, making it suitable for both system-level and room-level control. Additionally, BuildingGym is able to accept external signals as control inputs instead of taking the building as a stand-alone entity. This feature makes BuildingGym applicable for more flexible environments, e.g. smart grid and EVs community. The tool provides several built-in RL algorithms for control strategy training, simplifying the process for building managers to obtain optimal control strategies. Users can achieve this by following a few straightforward steps to configure BuildingGym for optimization control for common problems in the building energy management field. Moreover, AI specialists can easily implement and test state-of-the-art control algorithms within the platform. BuildingGym bridges the gap between building managers and AI specialists by allowing for the easy configuration and replacement of RL algorithms, simulators, and control environments or problems. With BuildingGym, we efficiently set up training tasks for cooling load management, targeting both constant and dynamic cooling load management. The built-in algorithms demonstrated strong performance across both tasks, highlighting the effectiveness of BuildingGym in optimizing cooling strategies.

Daniel Reijsbergen, Aung Maw, Tien Tuan Anh Dinh et al.

Smart grids leverage the data collected from smart meters to make important operational decisions. However, they are vulnerable to False Data Injection (FDI) attacks in which an attacker manipulates meter data to disrupt the grid operations. Existing works on FDI are based on a simple threat model in which a single grid operator has access to all the data, and only some meters can be compromised. Our goal is to secure smart grids against FDI under a realistic threat model. To this end, we present a threat model in which there are multiple operators, each with a partial view of the grid, and each can be fully compromised. An effective defense against FDI in this setting is to share data between the operators. However, the main challenge here is to incentivize data sharing. We address this by proposing an incentive mechanism that rewards operators for uploading data, but penalizes them if the data is missing or anomalous. We derive formal conditions under which our incentive mechanism is provably secure against operators who withhold or distort measurement data for profit. We then implement the data sharing solution on a private blockchain, introducing several optimizations that overcome the inherent performance limitations of the blockchain. Finally, we conduct an experimental evaluation that demonstrates that our implementation has practical performance.

Yan Qin, Wen-tai Li, Chau Yuen et al.

The sustaining evolution of sensing and advancement in communications technologies have revolutionized prognostics and health management for various electrical equipment towards data-driven ways. This revolution delivers a promising solution for the health monitoring problem of heat pump (HP) system, a vital device widely deployed in modern buildings for heating use, to timely evaluate its operation status to avoid unexpected downtime. Many HPs were practically manufactured and installed many years ago, resulting in fewer sensors available due to technology limitations and cost control at that time. It raises a dilemma to safeguard HPs at an affordable cost. We propose a hybrid scheme by integrating industrial Internet-of-Things (IIoT) and intelligent health monitoring algorithms to handle this challenge. To start with, an IIoT network is constructed to sense and store measurements. Specifically, temperature sensors are properly chosen and deployed at the inlet and outlet of the water tank to measure water temperature. Second, with temperature information, we propose an unsupervised learning algorithm named mixture slow feature analysis (MSFA) to timely evaluate the health status of the integrated HP. Characterized by frequent operation switches of different HPs due to the variable demand for hot water, various heating patterns with different heating speeds are observed. Slowness, a kind of dynamics to measure the varying speed of steady distribution, is properly considered in MSFA for both heating pattern division and health evaluation. Finally, the efficacy of the proposed method is verified through a real integrated HP with five connected HPs installed ten years ago. The experimental results show that MSFA is capable of accurately identifying health status of the system, especially failure at a preliminary stage compared to its competing algorithms.

Yuren Zhou, Clement Lork, Wen-Tai Li et al.

Air conditioning (AC) accounts for a critical portion of the global energy consumption. To improve its energy performance, it is important to fairly benchmark its energy performance and provide the evaluation feedback to users. However, this task has not been well tackled in the residential sector. In this paper, we propose a data-driven approach to fairly benchmark the AC energy performance of residential rooms. First, regression model is built for each benchmarked room so that its power consumption can be predicted given different weather conditions and AC settings. Then, all the rooms are clustered based on their areas and usual AC temperature set points. Lastly, within each cluster, rooms are benchmarked based on their predicted power consumption under uniform weather conditions and AC settings. A real-world case study was conducted with data collected from 44 residential rooms. Results show that the constructed regression models have an average prediction accuracy of 85.1% in cross-validation tests, and support vector regression with Gaussian kernel is the overall most suitable model structure for building the regression model. In the clustering step, 44 rooms are successfully clustered into seven clusters. By comparing the benchmarking scores generated by the proposed approach with two sets of scores computed from historical power consumption data, we demonstrate that the proposed approach is able to eliminate the influences of room areas, weather conditions, and AC settings on the benchmarking results. Therefore, the proposed benchmarking approach is valid and fair. As a by-product, the approach is also shown to be useful to investigate how room areas, weather conditions, and AC settings affect the AC power consumption of rooms in real life.

Hwei-Ming Chung, Wen-Tai Li, Chau Yuen et al.

A well-designed attack in the power system can cause an initial failure and then results in large-scale cascade failure. Several works have discussed power system attack through false data injection, line-maintaining attack, and line-removing attack. However, the existing methods need to continuously attack the system for a long time, and, unfortunately, the performance cannot be guaranteed if the system states vary. To overcome this issue, we consider a new type of attack strategy called combinational attack which masks a line-outage at one position but misleads the control center on line outage at another position. Therefore, the topology information in the control center is interfered by our attack. We also offer a procedure of selecting the vulnerable lines of its kind. The proposed method can effectively and continuously deceive the control center in identifying the actual position of line-outage. The system under attack will be exposed to increasing risks as the attack continuously. Simulation results validate the efficiency of the proposed attack strategy.