Indranil Pan

Saptarshi Das, Indranil Pan, Shantanu Das et al.

A novel fractional order (FO) fuzzy Proportional-Integral-Derivative (PID) controller has been proposed in this paper which works on the closed loop error and its fractional derivative as the input and has a fractional integrator in its output. The fractional order differ-integrations in the proposed fuzzy logic controller (FLC) are kept as design variables along with the input-output scaling factors (SF) and are optimized with Genetic Algorithm (GA) while minimizing several integral error indices along with the control signal as the objective function. Simulations studies are carried out to control a delayed nonlinear process and an open loop unstable process with time delay. The closed loop performances and controller efforts in each case are compared with conventional PID, fuzzy PID and PIλDμ controller subjected to different integral performance indices. Simulation results show that the proposed fractional order fuzzy PID controller outperforms the others in most cases.

Indranil Pan, Saptarshi Das

This paper investigates the use of fractional order (FO) controllers for a microgrid. The microgrid employs various autonomous generation systems like wind turbine generator (WTG), solar photovoltaic (PV), diesel energy generator (DEG) and fuel-cells (FC). Other storage devices like the battery energy storage system (BESS) and the flywheel energy storage system (FESS) are also present in the power network. An FO control strategy is employed and the FO-PID controller parameters are tuned with a global optimization algorithm to meet system performance specifications. A kriging based surrogate modeling technique is employed to alleviate the issue of expensive objective function evaluation for the optimization based controller tuning. Numerical simulations are reported to prove the validity of the proposed methods. The results for both the FO and the integer order (IO) controllers are compared with standard evolutionary optimization techniques and the relative merits and demerits of the kriging based surrogate modeling are discussed. This kind of optimization technique is not only limited to this specific case of microgrid control but also can be ported to other computationally expensive power system optimization problems.

Anish Acharya, Saptarshi Das, Indranil Pan et al.

This paper proposes the design of Fractional Order (FO) Butterworth filter in complex w-plane (w=sq; q being any real number) considering the presence of under-damped, hyper-damped, ultra-damped poles. This is the first attempt to design such fractional Butterworth filters in complex w-plane instead of complex s-plane, as conventionally done for integer order filters. Firstly, the concept of fractional derivatives and w-plane stability of linear fractional order systems are discussed. Detailed mathematical formulation for the design of fractional Butterworth-like filter (FBWF) in w-plane is then presented. Simulation examples are given along with a practical example to design the FO Butterworth filter with given specifications in frequency domain to show the practicability of the proposed formulation.

Indranil Pan, Saptarshi Das, Amitava Gupta

The issues of stochastically varying network delays and packet dropouts in Networked Control System (NCS) applications have been simultaneously addressed by time domain optimal tuning of fractional order (FO) PID controllers. Different variants of evolutionary algorithms are used for the tuning process and their performances are compared. Also the effectiveness of the fractional order PIλDμ controllers over their integer order counterparts is looked into. Two standard test bench plants with time delay and unstable poles which are encountered in process control applications are tuned with the proposed method to establish the validity of the tuning methodology. The proposed tuning methodology is independent of the specific choice of plant and is also applicable for less complicated systems. Thus it is useful in a wide variety of scenarios. The paper also shows the superiority of FOPID controllers over their conventional PID counterparts for NCS applications.

Saptarshi Das, Basudev Majumder, Anindya Pakhira et al.

Rational approximation of fractional order (FO) differ-integrators via Continued Fraction Expansion (CFE) is a well known technique. In this paper, the nominal structures of various generating functions are optimized using Genetic Algorithm (GA) to minimize the deviation in magnitude and phase response between the original FO element and the rationalized discrete time filter in Infinite Impulse Response (IIR) structure. The optimized filter based realizations show better approximation of the FO elements in comparison with the existing methods and is demonstrated by the frequency response of the IIR filters.

Saptarshi Das, Anish Acharya, Indranil Pan

Multi-wing chaotic attractors are highly complex nonlinear dynamical systems with higher number of index-2 equilibrium points. Due to the presence of several equilibrium points, randomness and hence the complexity of the state time series for these multi-wing chaotic systems is much higher than that of the conventional double-wing chaotic attractors. A real-coded Genetic Algorithm (GA) based global optimization framework has been adopted in this paper as a common template for designing optimum Proportional-Integral-Derivative (PID) controllers in order to control the state trajectories of four different multi-wing chaotic systems among the Lorenz family viz. Lu system, Chen system, Rucklidge (or Shimizu Morioka) system and Sprott-1 system. Robustness of the control scheme for different initial conditions of the multi-wing chaotic systems has also been shown.

Saptarshi Das, Indranil Pan, Shantanu Das

An optimal trade-off design for fractional order (FO)-PID controller is proposed in this paper with a Linear Quadratic Regulator (LQR) based technique using two conflicting time domain control objectives. The deviation of the state trajectories and control signal are automatically enforced by the LQR. A class of delayed FO systems with single non-integer order element has been controlled here which exhibit both sluggish and oscillatory open loop responses. The FO time delay processes are controlled within a multi-objective optimization (MOO) formulation of LQR based FOPID design. The time delays in the FO models are handled by two analytical formulations of designing optimal quadratic regulator for delayed systems. A comparison is made between the two approaches of LQR design for the stabilization of time-delay systems in the context of FOPID controller tuning. The MOO control design methodology yields the Pareto optimal trade-off solutions between the tracking performance for unit set-point change and total variation (TV) of the control signal. Numerical simulations are provided to compare the merits of the two delay handling techniques in the multi-objective LQR-FOPID design, while also showing the capability of load disturbance suppression using these optimal controllers. Tuning rules are then formed for the optimal LQR-FOPID controller knobs, using the median of the non-dominated Pareto solution to handle delays FO processes.

Indranil Pan, Saptarshi Das, Avijit Routh

In this paper, synchronization of identical switched chaotic systems is explored based on Lyapunov theory of guaranteed stability. Concepts from robust control principles and switched linear systems are merged together to derive a sufficient condition for synchronization of identical master-slave switched nonlinear chaotic systems and are expressed in the form of bilinear matrix inequalities (BMIs). The nonlinear controller design problem is then recast in the form of linear matrix inequalities (LMIs) to facilitate numerical computation by standard LMI solvers and is illustrated by appropriate examples.

Anindya Pakhira, Saptarshi Das, Anish Acharya et al.

Fractional order (FO) filters have been investigated in this paper, with band-pass (BP) and band-stop (BS) characteristics, which can not be achieved with conventional integer order filters with orders lesser then two. The quality factors for symmetric and asymmetric magnitude response have been optimized using real coded Genetic Algorithm (GA) for a user specified center frequency. Parametric influence of the FO filters on the magnitude response is also illustrated with credible numerical simulations.

Sayan Saha, Saptarshi Das, Anish Acharya et al.

The paper investigates nonlinear system identification using system output data at various linearized operating points. A feed-forward multi-layer Artificial Neural Network (ANN) based approach is used for this purpose and tested for two target applications i.e. nuclear reactor power level monitoring and an AC servo position control system. Various configurations of ANN using different activation functions, number of hidden layers and neurons in each layer are trained and tested to find out the best configuration. The training is carried out multiple times to check for consistency and the mean and standard deviation of the root mean square errors (RMSE) are reported for each configuration.

Anindya Pakhira, Saptarshi Das, Indranil Pan et al.

This paper uses the Continued Fraction Expansion (CFE) method for analog realization of fractional order differ-integrator and few special classes of fractional order (FO) controllers viz. Fractional Order Proportional-Integral-Derivative (FOPID) controller, FO[PD] controller and FO lead-lag compensator. Contemporary researchers have given several formulations for rational approximation of fractional order elements. However, approximation of the controllers studied in this paper, due to having fractional power of a rational transfer function, is not available in analog domain; although its digital realization already exists. This motivates us for applying CFE based analog realization technique for complicated FO controller structures to get equivalent rational transfer functions in terms of the controller tuning parameters. The symbolic expressions for rationalized transfer function in terms of the controller tuning parameters are especially important as ready references, without the need of running CFE algorithm every time and also helps in the synthesis of analog circuits for such FO controllers.

Saptarshi Das, Indranil Pan, Shantanu Das et al.

Genetic Algorithm (GA) has been used in this paper for a new Nyquist based sub-optimal model reduction and optimal time domain tuning of PID and fractional order (FO) PIλDμ controllers. Comparative studies show that the new model reduction technique outperforms the conventional H2-norm based reduced order modeling techniques. Optimum tuning rule has been developed next with a test-bench of higher order processes via Genetic Programming (GP) with minimum value of weighted integral error index and control signal. From the Pareto optimal front which is a trade-off between the complexity of the formulae and control performance, an efficient set of tuning rules has been generated for time domain optimal PID and PIλDμ controllers.

Saptarshi Das, Sayan Saha, Ayan Mukherjee et al.

Gain and order scheduling of fractional order (FO) PIλDμ controllers are studied in this paper considering four different classes of higher order processes. The mapping between the optimum PID/FOPID controller parameters and the reduced order process models are done using Radial Basis Function (RBF) type Artificial Neural Network (ANN). Simulation studies have been done to show the effectiveness of the RBFNN for online scheduling of such controllers with random change in set-point and process parameters.

Basudev Majumder, Saptarshi Das, Indranil Pan et al.

This paper analyzes a nuclear reactor power signal that suffers from network induced random delays in the shared data network while being fed-back to the Reactor Regulating System (RRS). A detailed study is carried out to investigate the self similarity of random delay dynamics due to the network traffic in shared medium. The fractionality or selfsimilarity in the network induced delay that corrupts the measured power signal coming from Self Powered Neutron Detectors (SPND) is estimated and analyzed. As any fractional order randomness is intrinsically different from conventional Gaussian kind of randomness, these delay dynamics need to be handled efficiently, before reaching the controller within the RRS. An attempt has been made to minimize the effect of the randomness in the reactor power transient data with few classes of smoothing filters. The performance measure of the smoothers with fractional order noise consideration is also investigated into.

Avijit Routh, Sourav Das, Saptarshi Das et al.

Stabilizing state feedback controller has been designed in this paper for a switched DC motor plant, controlled over communication network. The switched system formulation for the networked control system (NCS) with additional switching in a plant parameter along with the switching due to random packet losses, have been formulated as few set of non-strict Linear Matrix Inequalities (LMIs). In order to solve non-strict LMIs using standard LMI solver and to design the stabilizing state feedback controller, the Cone Complementary Linearization (CCL) technique has been adopted. Simulation studies have been carried out for a DC motor plant, operating at two different sampling times with random switching in the moment of inertia, representing sudden jerks.

Ayan Mukherjee, Anindya Pakhira, Saptarshi Das et al.

The paper presents a Stateflow based network test-bed to validate real-time optimal control algorithms. Genetic Algorithm (GA) based time domain performance index minimization is attempted for tuning of PI controller to handle a balanced lag and delay type First Order Plus Time Delay (FOPTD) process over network. The tuning performance is validated on a real-time communication network with artificially simulated stochastic delay, packet loss and out-of order packets characterizing the network.

Gabriel F. N. Gonçalves, Assen Batchvarov, Yuyi Liu et al.

In chemical process engineering, surrogate models of complex systems are often necessary for tasks of domain exploration, sensitivity analysis of the design parameters, and optimization. A suite of computational fluid dynamics (CFD) simulations geared toward chemical process equipment modeling has been developed and validated with experimental results from the literature. Various regression-based active learning strategies are explored with these CFD simulators in-the-loop under the constraints of a limited function evaluation budget. Specifically, five different sampling strategies and five regression techniques are compared, considering a set of four test cases of industrial significance and varying complexity. Gaussian process regression was observed to have a consistently good performance for these applications. The present quantitative study outlines the pros and cons of the different available techniques and highlights the best practices for their adoption. The test cases and tools are available with an open-source license to ensure reproducibility and engage the wider research community in contributing to both the CFD models and developing and benchmarking new improved algorithms tailored to this field.

Themistoklis Botsas, Lachlan R. Mason, Omar K. Matar et al.

In our previous work, we introduced the rule-based Bayesian Regression, a methodology that leverages two concepts: (i) Bayesian inference, for the general framework and uncertainty quantification and (ii) rule-based systems for the incorporation of expert knowledge and intuition. The resulting method creates a penalty equivalent to a common Bayesian prior, but it also includes information that typically would not be available within a standard Bayesian context. In this work, we extend the aforementioned methodology with grammatical evolution, a symbolic genetic programming technique that we utilise for automating the rules' derivation. Our motivation is that grammatical evolution can potentially detect patterns from the data with valuable information, equivalent to that of expert knowledge. We illustrate the use of the rule-based Evolutionary Bayesian learning technique by applying it to synthetic as well as real data, and examine the results in terms of point predictions and associated uncertainty.

Indranil Pan, Lachlan Mason, Omar Matar

Recent advances in machine learning, coupled with low-cost computation, availability of cheap streaming sensors, data storage and cloud technologies, has led to widespread multi-disciplinary research activity with significant interest and investment from commercial stakeholders. Mechanistic models, based on physical equations, and purely data-driven statistical approaches represent two ends of the modelling spectrum. New hybrid, data-centric engineering approaches, leveraging the best of both worlds and integrating both simulations and data, are emerging as a powerful tool with a transformative impact on the physical disciplines. We review the key research trends and application scenarios in the emerging field of integrating simulations, machine learning, and statistics. We highlight the opportunities that such an integrated vision can unlock and outline the key challenges holding back its realisation. We also discuss the bottlenecks in the translational aspects of the field and the long-term upskilling requirements of the existing workforce and future university graduates.

Themistoklis Botsas, Lachlan R. Mason, Indranil Pan

We introduce a novel rule-based approach for handling regression problems. The new methodology carries elements from two frameworks: (i) it provides information about the uncertainty of the parameters of interest using Bayesian inference, and (ii) it allows the incorporation of expert knowledge through rule-based systems. The blending of those two different frameworks can be particularly beneficial for various domains (e.g. engineering), where, even though the significance of uncertainty quantification motivates a Bayesian approach, there is no simple way to incorporate researcher intuition into the model. We validate our models by applying them to synthetic applications: a simple linear regression problem and two more complex structures based on partial differential equations. Finally, we review the advantages of our methodology, which include the simplicity of the implementation, the uncertainty reduction due to the added information and, in some occasions, the derivation of better point predictions, and we address limitations, mainly from the computational complexity perspective, such as the difficulty in choosing an appropriate algorithm and the added computational burden.

Romit Maulik, Themistoklis Botsas, Nesar Ramachandra et al.

Non-intrusive reduced-order models (ROMs) have recently generated considerable interest for constructing computationally efficient counterparts of nonlinear dynamical systems emerging from various domain sciences. They provide a low-dimensional emulation framework for systems that may be intrinsically high-dimensional. This is accomplished by utilizing a construction algorithm that is purely data-driven. It is no surprise, therefore, that the algorithmic advances of machine learning have led to non-intrusive ROMs with greater accuracy and computational gains. However, in bypassing the utilization of an equation-based evolution, it is often seen that the interpretability of the ROM framework suffers. This becomes more problematic when black-box deep learning methods are used which are notorious for lacking robustness outside the physical regime of the observed data. In this article, we propose the use of a novel latent-space interpolation algorithm based on Gaussian process regression. Notably, this reduced-order evolution of the system is parameterized by control parameters to allow for interpolation in space. The use of this procedure also allows for a continuous interpretation of time which allows for temporal interpolation. The latter aspect provides information, with quantified uncertainty, about full-state evolution at a finer resolution than that utilized for training the ROMs. We assess the viability of this algorithm for an advection-dominated system given by the inviscid shallow water equations.

Pavan Inguva, Lachlan Mason, Indranil Pan et al.

Multi-component polymer systems are of interest in organic photovoltaic and drug delivery applications, among others where diverse morphologies influence performance. An improved understanding of morphology classification, driven by composition-informed prediction tools, will aid polymer engineering practice. We use a modified Cahn-Hilliard model to simulate polymer precipitation. Such physics-based models require high-performance computations that prevent rapid prototyping and iteration in engineering settings. To reduce the required computational costs, we apply machine learning techniques for clustering and consequent prediction of the simulated polymer blend images in conjunction with simulations. Integrating ML and simulations in such a manner reduces the number of simulations needed to map out the morphology of polymer blends as a function of input parameters and also generates a data set which can be used by others to this end. We explore dimensionality reduction, via principal component analysis and autoencoder techniques, and analyse the resulting morphology clusters. Supervised machine learning using Gaussian process classification was subsequently used to predict morphology clusters according to species molar fraction and interaction parameter inputs. Manual pattern clustering yielded the best results, but machine learning techniques were able to predict the morphology of polymer blends with $\geq$ 90 $\%$ accuracy.

Daya Shankar Pandey, Saptarshi Das, Indranil Pan et al.

In this paper, multi-layer feed forward neural networks are used to predict the lower heating value of gas (LHV), lower heating value of gasification products including tars and entrained char (LHVp) and syngas yield during gasification of municipal solid waste (MSW) during gasification in a fluidized bed reactor. These artificial neural networks (ANNs) with different architectures are trained using the Levenberg-Marquardt (LM) back-propagation algorithm and a cross validation is also performed to ensure that the results generalise to other unseen datasets. A rigorous study is carried out on optimally choosing the number of hidden layers, number of neurons in the hidden layer and activation function in a network using multiple Monte Carlo runs. Nine input and three output parameters are used to train and test various neural network architectures in both multiple output and single output prediction paradigms using the available experimental datasets. The model selection procedure is carried out to ascertain the best network architecture in terms of predictive accuracy. The simulation results show that the ANN based methodology is a viable alternative which can be used to predict the performance of a fluidized bed gasifier.

Indranil Pan, Saptarshi Das

In a recent paper, we presented an intelligent evolutionary search technique through genetic programming (GP) for finding new analytical expressions of nonlinear dynamical systems, similar to the classical Lorenz attractor's which also exhibit chaotic behaviour in the phase space. In this paper, we extend our previous finding to explore yet another gallery of new chaotic attractors which are derived from the original Lorenz system of equations. Compared to the previous exploration with sinusoidal type transcendental nonlinearity, here we focus on only cross-product and higher-power type nonlinearities in the three state equations. We here report over 150 different structures of chaotic attractors along with their one set of parameter values, phase space dynamics and the Largest Lyapunov Exponents (LLE). The expressions of these new Lorenz-like nonlinear dynamical systems have been automatically evolved through multi-gene genetic programming (MGGP). In the past two decades, there have been many claims of designing new chaotic attractors as an incremental extension of the Lorenz family. We provide here a large family of chaotic systems whose structure closely resemble the original Lorenz system but with drastically different phase space dynamics. This advances the state of the art knowledge of discovering new chaotic systems which can find application in many real-world problems. This work may also find its archival value in future in the domain of new chaotic system discovery.

Indranil Pan, Dirk Bester

In a recent paper [1] we introduced the Fuzzy Bayesian Learning (FBL) paradigm where expert opinions can be encoded in the form of fuzzy rule bases and the hyper-parameters of the fuzzy sets can be learned from data using a Bayesian approach. The present paper extends this work for selecting the most appropriate rule base among a set of competing alternatives, which best explains the data, by calculating the model evidence or marginal likelihood. We explain why this is an attractive alternative over simply minimizing a mean squared error metric of prediction and show the validity of the proposition using synthetic examples and a real world case study in the financial services sector.

Indranil Pan, Saptarshi Das, Shantanu Das

In this paper, an active control policy design for a fractional order (FO) financial system is attempted, considering multiple conflicting objectives. An active control template as a nonlinear state feedback mechanism is developed and the controller gains are chosen within a multi-objective optimization (MOO) framework to satisfy the conditions of asymptotic stability, derived analytically. The MOO gives a set of solutions on the Pareto optimal front for the multiple conflicting objectives that are considered. It is shown that there is a trade-off between the multiple design objectives and a better performance in one objective can only be obtained at the cost of performance deterioration in the other objectives. The multi-objective controller design has been compared using three different MOO techniques viz. Non Dominated Sorting Genetic Algorithm-II (NSGA-II), epsilon variable Multi-Objective Genetic Algorithm (ev-MOGA), and Multi Objective Evolutionary Algorithm with Decomposition (MOEA/D). The robustness of the same control policy designed with the nominal system settings have been investigated also for gradual decrease in the commensurate and incommensurate fractional orders of the financial system.

Indranil Pan, Saptarshi Das

This paper investigates the operation of a hybrid power system through a novel fuzzy control scheme. The hybrid power system employs various autonomous generation systems like wind turbine, solar photovoltaic, diesel engine, fuel-cell, aqua electrolyzer etc. Other energy storage devices like the battery, flywheel and ultra-capacitor are also present in the network. A novel fractional order (FO) fuzzy control scheme is employed and its parameters are tuned with a particle swarm optimization (PSO) algorithm augmented with two chaotic maps for achieving an improved performance. This FO fuzzy controller shows better performance over the classical PID, and the integer order fuzzy PID controller in both linear and nonlinear operating regimes. The FO fuzzy controller also shows stronger robustness properties against system parameter variation and rate constraint nonlinearity, than that with the other controller structures. The robustness is a highly desirable property in such a scenario since many components of the hybrid power system may be switched on/off or may run at lower/higher power output, at different time instants.

Indranil Pan, Saptarshi Das

Fractional order proportional-integral-derivative (FOPID) controllers are designed for load frequency control (LFC) of two interconnected power systems. Conflicting time domain design objectives are considered in a multi objective optimization (MOO) based design framework to design the gains and the fractional differ-integral orders of the FOPID controllers in the two areas. Here, we explore the effect of augmenting two different chaotic maps along with the uniform random number generator (RNG) in the popular MOO algorithm - the Non-dominated Sorting Genetic Algorithm-II (NSGA-II). Different measures of quality for MOO e.g. hypervolume indicator, moment of inertia based diversity metric, total Pareto spread, spacing metric are adopted to select the best set of controller parameters from multiple runs of all the NSGA-II variants (i.e. nominal and chaotic versions). The chaotic versions of the NSGA-II algorithm are compared with the standard NSGA-II in terms of solution quality and computational time. In addition, the Pareto optimal fronts showing the trade-off between the two conflicting time domain design objectives are compared to show the advantage of using the FOPID controller over that with simple PID controller. The nature of fast/slow and high/low noise amplification effects of the FOPID structure or the four quadrant operation in the two inter-connected areas of the power system is also explored. A fuzzy logic based method has been adopted next to select the best compromise solution from the best Pareto fronts corresponding to each MOO comparison criteria. The time domain system responses are shown for the fuzzy best compromise solutions under nominal operating conditions. Comparative analysis on the merits and de-merits of each controller structure is reported then. A robustness analysis is also done for the PID and the FOPID controllers.

Indranil Pan, Saptarshi Das

The applicability of fractional order (FO) automatic generation control (AGC) for power system frequency oscillation damping is investigated in this paper, employing distributed energy generation. The hybrid power system employs various autonomous generation systems like wind turbine, solar photovoltaic, diesel engine, fuel-cell and aqua electrolyzer along with other energy storage devices like the battery and flywheel. The controller is placed in a remote location while receiving and sending signals over an unreliable communication network with stochastic delay. The controller parameters are tuned using robust optimization techniques employing different variants of Particle Swarm Optimization (PSO) and are compared with the corresponding optimal solutions. An archival based strategy is used for reducing the number of function evaluations for the robust optimization methods. The solutions obtained through the robust optimization are able to handle higher variation in the controller gains and orders without significant decrease in the system performance. This is desirable from the FO controller implementation point of view, as the design is able to accommodate variations in the system parameter which may result due to the approximation of FO operators, using different realization methods and order of accuracy. Also a comparison is made between the FO and the integer order (IO) controllers to highlight the merits and demerits of each scheme.

Indranil Pan, Dirk Bester

In this paper we propose a novel approach for learning from data using rule based fuzzy inference systems where the model parameters are estimated using Bayesian inference and Markov Chain Monte Carlo (MCMC) techniques. We show the applicability of the method for regression and classification tasks using synthetic data-sets and also a real world example in the financial services industry. Then we demonstrate how the method can be extended for knowledge extraction to select the individual rules in a Bayesian way which best explains the given data. Finally we discuss the advantages and pitfalls of using this method over state-of-the-art techniques and highlight the specific class of problems where this would be useful.

Indranil Pan, Saptarshi Das

In this paper, we propose a novel methodology for automatically finding new chaotic attractors through a computational intelligence technique known as multi-gene genetic programming (MGGP). We apply this technique to the case of the Lorenz attractor and evolve several new chaotic attractors based on the basic Lorenz template. The MGGP algorithm automatically finds new nonlinear expressions for the different state variables starting from the original Lorenz system. The Lyapunov exponents of each of the attractors are calculated numerically based on the time series of the state variables using time delay embedding techniques. The MGGP algorithm tries to search the functional space of the attractors by aiming to maximise the largest Lyapunov exponent (LLE) of the evolved attractors. To demonstrate the potential of the proposed methodology, we report over one hundred new chaotic attractor structures along with their parameters, which are evolved from just the Lorenz system alone.

Indranil Pan, Daya Shankar Pandey, Saptarshi Das

In this paper, a nonlinear symbolic regression technique using an evolutionary algorithm known as multi-gene genetic programming (MGGP) is applied for a data-driven modelling between the dependent and the independent variables. The technique is applied for modelling the measured global solar irradiation and validated through numerical simulations. The proposed modelling technique shows improved results over the fuzzy logic and artificial neural network (ANN) based approaches as attempted by contemporary researchers. The method proposed here results in nonlinear analytical expressions, unlike those with neural networks which is essentially a black box modelling approach. This additional flexibility is an advantage from the modelling perspective and helps to discern the important variables which affect the prediction. Due to the evolutionary nature of the algorithm, it is able to get out of local minima and converge to a global optimum unlike the back-propagation (BP) algorithm used for training neural networks. This results in a better percentage fit than the ones obtained using neural networks by contemporary researchers. Also a hold-out cross validation is done on the obtained genetic programming (GP) results which show that the results generalize well to new data and do not over-fit the training samples. The multi-gene GP results are compared with those, obtained using its single-gene version and also the same with four classical regression models in order to show the effectiveness of the adopted approach.

Sayan Saha, Saptarshi Das, Anindya Pakhira et al.

Decentralized PID controllers have been designed in this paper for simultaneous tracking of individual process variables in multivariable systems under step reference input. The controller design framework takes into account the minimization of a weighted sum of Integral of Time multiplied Squared Error (ITSE) and Integral of Squared Controller Output (ISCO) so as to balance the overall tracking errors for the process variables and required variation in the corresponding manipulated variables. Decentralized PID gains are tuned using three popular Evolutionary Algorithms (EAs) viz. Genetic Algorithm (GA), Evolutionary Strategy (ES) and Cultural Algorithm (CA). Credible simulation comparisons have been reported for four benchmark 2x2 multivariable processes.

Saptarshi Das, Indranil Pan, Khrist Sur et al.

This paper investigates typical behaviors like damped oscillations in fractional order (FO) dynamical systems. Such response occurs due to the presence of, what is conceived as, pseudo-damping and meta-damping in some special class of FO systems. Here, approximation of such damped oscillation in FO systems with the conventional notion of integer order damping and time constant has been carried out using Genetic Algorithm (GA). Next, a multilayer feed-forward Artificial Neural Network (ANN) has been trained using the GA based results to predict the optimal pseudo and meta-damping from knowledge of the maximum order or number of terms in the FO dynamical system.

Indranil Pan, Saptarshi Das

In this paper, a fractional order (FO) PIλDμcontroller is designed to take care of various contradictory objective functions for an Automatic Voltage Regulator (AVR) system. An improved evolutionary Non-dominated Sorting Genetic Algorithm II (NSGA II), which is augmented with a chaotic map for greater effectiveness, is used for the multi-objective optimization problem. The Pareto fronts showing the trade-off between different design criteria are obtained for the PIλDμand PID controller. A comparative analysis is done with respect to the standard PID controller to demonstrate the merits and demerits of the fractional order PIλDμcontroller.

Saptarshi Das, Indranil Pan, Shantanu Das et al.

Genetic Algorithm (GA) has been used in this paper for a new approach of sub-optimal model reduction in the Nyquist plane and optimal time domain tuning of PID and fractional order (FO) PIλDμ controllers. Simulation studies show that the Nyquist based new model reduction technique outperforms the conventional H2 norm based reduced parameter modeling technique. With the tuned controller parameters and reduced order model parameter data-set, optimum tuning rules have been developed with a test-bench of higher order processes via Genetic Programming (GP). The GP performs a symbolic regression on the reduced process parameters to evolve a tuning rule which provides the best analytical expression to map the data. The tuning rules are developed for a minimum time domain integral performance index described by weighted sum of error index and controller effort. From the reported Pareto optimal front of GP based optimal rule extraction technique a trade-off can be made between the complexity of the tuning formulae and the control performance. The efficacy of the single-gene and multi-gene GP based tuning rules has been compared with original GA based control performance for the PID and PIλDμ controllers, handling four different class of representative higher order processes. These rules are very useful for process control engineers as they inherit the power of the GA based tuning methodology, but can be easily calculated without the requirement for running the computationally intensive GA every time. Three dimensional plots of the required variation in PID/FOPID controller parameters with reduced process parameters have been shown as a guideline for the operator. Parametric robustness of the reported GP based tuning rules has also been shown with credible simulation examples.