Cheng Liu

Hao Lv, Bing Li, Lei Zhang et al.

The RRAM-based neuromorphic computing system has amassed explosive interests for its superior data processing capability and energy efficiency than traditional architectures, and thus being widely used in many data-centric applications. The reliability and security issues of the NCS therefore become an essential problem. In this paper, we systematically investigated the adversarial threats to the RRAM-based NCS and observed that the RRAM hardware feature can be leveraged to strengthen the attack effect, which has not been granted sufficient attention by previous algorithmic attack methods. Thus, we proposed two types of hardware-aware attack methods with respect to different attack scenarios and objectives. The first is adversarial attack, VADER, which perturbs the input samples to mislead the prediction of neural networks. The second is fault injection attack, EFI, which perturbs the network parameter space such that a specified sample will be classified to a target label, while maintaining the prediction accuracy on other samples. Both attack methods leverage the RRAM properties to improve the performance compared with the conventional attack methods. Experimental results show that our hardware-aware attack methods can achieve nearly 100% attack success rate with extremely low operational cost, while maintaining the attack stealthiness.

Haitong Huang, Xinghua Xue, Cheng Liu et al.

Soft errors in large VLSI circuits pose dramatic influence on computing- and memory-intensive neural network (NN) processing. Understanding the influence of soft errors on NNs is critical to protect against soft errors for reliable NN processing. Prior work mainly rely on fault simulation to analyze the influence of soft errors on NN processing. They are accurate but usually specific to limited configurations of errors and NN models due to the prohibitively slow simulation speed especially for large NN models and datasets. With the observation that the influence of soft errors propagates across a large number of neurons and accumulates as well, we propose to characterize the soft error induced data disturbance on each neuron with normal distribution model according to central limit theorem and develop a series of statistical models to analyze the behavior of NN models under soft errors in general. The statistical models reveal not only the correlation between soft errors and NN model accuracy, but also how NN parameters such as quantization and architecture affect the reliability of NNs. The proposed models are compared with fault simulation and verified comprehensively. In addition, we observe that the statistical models that characterize the soft error influence can also be utilized to predict fault simulation results in many cases and we explore the use of the proposed statistical models to accelerate fault simulations of NNs. According to our experiments, the accelerated fault simulation shows almost two orders of magnitude speedup with negligible simulation accuracy loss over the baseline fault simulations.

Xinghua Xue, Cheng Liu, Bo Liu et al.

Winograd is generally utilized to optimize convolution performance and computational efficiency because of the reduced multiplication operations, but the reliability issues brought by winograd are usually overlooked. In this work, we observe the great potential of winograd convolution in improving neural network (NN) fault tolerance. Based on the observation, we evaluate winograd convolution fault tolerance comprehensively from different granularities ranging from models, layers, and operation types for the first time. Then, we explore the use of inherent fault tolerance of winograd convolution for cost-effective NN protection against soft errors. Specifically, we mainly investigate how winograd convolution can be effectively incorporated with classical fault-tolerant design approaches including triple modular redundancy (TMR), fault-aware retraining, and constrained activation functions. According to our experiments, winograd convolution can reduce the fault-tolerant design overhead by 55.77\% on average without any accuracy loss compared to standard convolution, and further reduce the computing overhead by 17.24\% when the inherent fault tolerance of winograd convolution is considered. When it is applied on fault-tolerant neural networks enhanced with fault-aware retraining and constrained activation functions, the resulting model accuracy generally shows significant improvement in presence of various faults.

Cheng Liu, Zhen Gao, Siting Liu et al.

With the rapid advancements of deep learning in the past decade, it can be foreseen that deep learning will be continuously deployed in more and more safety-critical applications such as autonomous driving and robotics. In this context, reliability turns out to be critical to the deployment of deep learning in these applications and gradually becomes a first-class citizen among the major design metrics like performance and energy efficiency. Nevertheless, the back-box deep learning models combined with the diverse underlying hardware faults make resilient deep learning extremely challenging. In this special session, we conduct a comprehensive survey of fault-tolerant deep learning design approaches with a hierarchical perspective and investigate these approaches from model layer, architecture layer, circuit layer, and cross layer respectively.

Haitong Huang, Cheng Liu, Bo Liu et al.

To ensure resilient neural network processing on even unreliable hardware, comprehensive reliability analysis against various hardware faults is generally required before the deep neural network models are deployed, and efficient error injection tools are highly demanded. However, most existing fault injection tools remain rather limited to basic fault injection to neurons and fail to provide fine-grained vulnerability analysis capability. In addition, many of the fault injection tools still need to change the neural network models and make the fault injection closely coupled with normal neural network processing, which further complicates the use of the fault injection tools and slows down the fault simulation. In this work, we propose MRFI, a highly configurable multi-resolution fault injection tool for deep neural networks. It enables users to modify an independent fault configuration file rather than neural network models for the fault injection and vulnerability analysis. Particularly, it integrates extensive fault analysis functionalities from different perspectives and enables multi-resolution investigation of the vulnerability of neural networks. In addition, it does not modify the major neural network computing framework of PyTorch. Hence, it allows parallel processing on GPUs naturally and exhibits fast fault simulation according to our experiments.

Zesong Jiang, Qing Zhang, Cheng Liu et al.

Open-source EDA tools are rapidly advancing, fostering collaboration, innovation, and knowledge sharing within the EDA community. However, the growing complexity of these tools, characterized by numerous design parameters and heuristics, poses a significant barrier to their widespread adoption. This complexity is particularly pronounced in integrated circuit (IC) backend designs, which place substantial demands on engineers' expertise in EDA tools. To tackle this challenge, we introduce IICPilot, an intelligent IC backend design system based on LLM technology. IICPilot automates various backend design procedures, including script generation, EDA tool invocation, design space exploration of EDA parameters, container-based computing resource allocation, and exception management. By automating these tasks, IICPilot significantly lowers the barrier to entry for open-source EDA tools. Specifically, IICPilot utilizes LangChain's multi-agent framework to efficiently handle distinct design tasks, enabling flexible enhancements independently. Moreover, IICPilot separates the backend design workflow from specific open-source EDA tools through a unified EDA calling interface. This approach allows seamless integration with different open-source EDA tools like OpenROAD and iEDA, streamlining the backend design and optimization across the EDA tools.

Junfeng Gong, Cheng Liu, Long Cheng et al.

Mixed-precision neural network (MPNN) that utilizes just enough data width for the neural network processing is an effective approach to meet the stringent resources constraints including memory and computing of MCUs. Nevertheless, there is still a lack of sub-byte and mixed-precision SIMD operations in MCU-class ISA and the limited computing capability of MCUs remains underutilized, which further aggravates the computing bound encountered in neural network processing. As a result, the benefits of MPNNs cannot be fully unleashed. In this work, we propose to pack multiple low-bitwidth arithmetic operations within a single instruction multiple data (SIMD) instructions in typical MCUs, and then develop an efficient convolution operator by exploring both the data parallelism and computing parallelism in convolution along with the proposed SIMD packing. Finally, we further leverage Neural Architecture Search (NAS) to build a HW/SW co-designed MPNN design framework, namely MCU-MixQ. This framework can optimize both the MPNN quantization and MPNN implementation efficiency, striking an optimized balance between neural network performance and accuracy. According to our experiment results, MCU-MixQ achieves 2.1$\times$ and 1.4$\times$ speedup over CMix-NN and MCUNet respectively under the same resource constraints.

Siyi Zhang, Cheng Liu, Xiang Li et al.

The current trend of automating inspections at substations has sparked a surge in interest in the field of transformer image recognition. However, due to restrictions in the number of parameters in existing models, high-resolution images can't be directly applied, leaving significant room for enhancing recognition accuracy. Addressing this challenge, the paper introduces a novel improvement on deep self-attention networks tailored for this issue. The proposed model comprises four key components: a foundational network, a region proposal network, a module for extracting and segmenting target areas, and a final prediction network. The innovative approach of this paper differentiates itself by decoupling the processes of part localization and recognition, initially using low-resolution images for localization followed by high-resolution images for recognition. Moreover, the deep self-attention network's prediction mechanism uniquely incorporates the semantic context of images, resulting in substantially improved recognition performance. Comparative experiments validate that this method outperforms the two other prevalent target recognition models, offering a groundbreaking perspective for automating electrical equipment inspections.

Haitong Huang, Cheng Liu

The reliability of deep learning accelerators (DLAs) used in autonomous driving systems has significant impact on the system safety. However, the DLA reliability is usually evaluated with low-level metrics like mean square errors of the output which remains rather different from the high-level metrics like total distance traveled before failure in autonomous driving. As a result, the high-level reliability metrics evaluated at the post-silicon stage may still lead to DLA design revision and result in expensive reliable DLA design iterations targeting at autonomous driving. To address the problem, we proposed a DLA-in-loop reliability evaluation platform to enable system reliability evaluation at the early DLA design stage.

Zhehui Wang, Tao Luo, Cheng Liu et al.

Large language models (LLMs) have garnered substantial attention due to their promising applications in diverse domains. Nevertheless, the increasing size of LLMs comes with a significant surge in the computational requirements for training and deployment. Memristor crossbars have emerged as a promising solution, which demonstrated a small footprint and remarkably high energy efficiency in computer vision (CV) models. Memristors possess higher density compared to conventional memory technologies, making them highly suitable for effectively managing the extreme model size associated with LLMs. However, deploying LLMs on memristor crossbars faces three major challenges. Firstly, the size of LLMs increases rapidly, already surpassing the capabilities of state-of-the-art memristor chips. Secondly, LLMs often incorporate multi-head attention blocks, which involve non-weight stationary multiplications that traditional memristor crossbars cannot support. Third, while memristor crossbars excel at performing linear operations, they are not capable of executing complex nonlinear operations in LLM such as softmax and layer normalization. To address these challenges, we present a novel architecture for the memristor crossbar that enables the deployment of state-of-the-art LLM on a single chip or package, eliminating the energy and time inefficiencies associated with off-chip communication. Our testing on BERT_Large showed negligible accuracy loss. Compared to traditional memristor crossbars, our architecture achieves enhancements of up to 39X in area overhead and 18X in energy consumption. Compared to modern TPU/GPU systems, our architecture demonstrates at least a 68X reduction in the area-delay product and a significant 69% energy consumption reduction.

Benjamin Chen Ming Choong, Tao Luo, Cheng Liu et al.

Deep neural networks generate and process large volumes of data, posing challenges for low-resource embedded systems. In-memory computing has been demonstrated as an efficient computing infrastructure and shows promise for embedded AI applications. Among newly-researched memory technologies, racetrack memory is a non-volatile technology that allows high data density fabrication, making it a good fit for in-memory computing. However, integrating in-memory arithmetic circuits with memory cells affects both the memory density and power efficiency. It remains challenging to build efficient in-memory arithmetic circuits on racetrack memory within area and energy constraints. To this end, we present an efficient in-memory convolutional neural network (CNN) accelerator optimized for use with racetrack memory. We design a series of fundamental arithmetic circuits as in-memory computing cells suited for multiply-and-accumulate operations. Moreover, we explore the design space of racetrack memory based systems and CNN model architectures, employing co-design to improve the efficiency and performance of performing CNN inference in racetrack memory while maintaining model accuracy. Our designed circuits and model-system co-optimization strategies achieve a small memory bank area with significant improvements in energy and performance for racetrack memory based embedded systems.

Zhehui Wang, Benjamin Chen Ming Choong, Tian Huang et al.

Quantum optimization is the most mature quantum computing technology to date, providing a promising approach towards efficiently solving complex combinatorial problems. Methods such as adiabatic quantum computing (AQC) have been employed in recent years on important optimization problems across various domains. In deep learning, deep neural networks (DNN) have reached immense sizes to support new predictive capabilities. Optimization of large-scale models is critical for sustainable deployment, but becomes increasingly challenging with ever-growing model sizes and complexity. While quantum optimization is suitable for solving complex problems, its application to DNN optimization is not straightforward, requiring thorough reformulation for compatibility with commercially available quantum devices. In this work, we explore the potential of adopting AQC for fine-grained pruning-quantization of convolutional neural networks. We rework established heuristics to formulate model compression as a quadratic unconstrained binary optimization (QUBO) problem, and assess the solution space offered by commercial quantum annealing devices. Through our exploratory efforts of reformulation, we demonstrate that AQC can achieve effective compression of practical DNN models. Experiments demonstrate that adiabatic quantum computing (AQC) not only outperforms classical algorithms like genetic algorithms and reinforcement learning in terms of time efficiency but also excels at identifying global optima.

Guoyu Li, Shengyu Ye, Chunyun Chen et al.

The emergence of neural network capabilities invariably leads to a significant surge in computational demands due to expanding model sizes and increased computational complexity. To reduce model size and lower inference costs, recent research has focused on simplifying models and designing hardware accelerators using low-bit quantization. However, due to numerical representation limits, scalar quantization cannot reduce bit width lower than 1-bit, diminishing its benefits. To break through these limitations, we introduce LUT-DLA, a Look-Up Table (LUT) Deep Learning Accelerator Framework that utilizes vector quantization to convert neural network models into LUTs, achieving extreme low-bit quantization. The LUT-DLA framework facilitates efficient and cost-effective hardware accelerator designs and supports the LUTBoost algorithm, which helps to transform various DNN models into LUT-based models via multistage training, drastically cutting both computational and hardware overhead. Additionally, through co-design space exploration, LUT-DLA assesses the impact of various model and hardware parameters to fine-tune hardware configurations for different application scenarios, optimizing performance and efficiency. Our comprehensive experiments show that LUT-DLA achieves improvements in power efficiency and area efficiency with gains of $1.4$~$7.0\times$ and $1.5$~$146.1\times$, respectively, while maintaining only a modest accuracy drop. For CNNs, accuracy decreases by $0.1\%$~$3.1\%$ using the $L_2$ distance similarity, $0.1\%$~$3.4\%$ with the $L_1$ distance similarity, and $0.1\%$~$3.8\%$ when employing the Chebyshev distance similarity. For transformer-based models, the accuracy drop ranges from $1.4\%$ to $3.0\%$.

Qing Zhang, Cheng Liu, Bo Liu et al.

Fault-tolerant deep learning accelerator is the basis for highly reliable deep learning processing and critical to deploy deep learning in safety-critical applications such as avionics and robotics. Since deep learning is known to be computing- and memory-intensive, traditional fault-tolerant approaches based on redundant computing will incur substantial overhead including power consumption and chip area. To this end, we propose to characterize deep learning vulnerability difference across both neurons and bits of each neuron, and leverage the vulnerability difference to enable selective protection of the deep learning processing components from the perspective of architecture layer and circuit layer respectively. At the same time, we observe the correlation between model quantization and bit protection overhead of the underlying processing elements of deep learning accelerators, and propose to reduce the bit protection overhead by adding additional quantization constrain without compromising the model accuracy. Finally, we employ Bayesian optimization strategy to co-optimize the correlated cross-layer design parameters at algorithm layer, architecture layer, and circuit layer to minimize the hardware resource consumption while fulfilling multiple user constraints including reliability, accuracy, and performance of the deep learning processing at the same time.

Junfeng Gong, Zhiyi Wei, Junying Chen et al.

Despite significant evolution of CUDA programming and domain-specific libraries, effectively utilizing GPUs with massively parallel engines remains difficult. Large language models (LLMs) show strong potential in generating optimized CUDA code from sequential code. However, using LLMs in practice faces two major challenges: cloud-based APIs pose risks of code leakage, and local deployment is often computationally expensive and inefficient. These drawbacks have spurred interest in small language models (SLMs), which are more lightweight and privacy-friendly. Encouragingly, recent studies show that SLMs can achieve performance comparable to LLMs on specific tasks. While SLMs can match LLMs on domain-specific tasks, their limited reasoning abilities lead to suboptimal performance in complex CUDA generation according to our experiments. To bridge this gap, we propose ReGraphT, a training-free, retrieval-augmented generation framework that transfers LLM-level reasoning to smaller models. ReGraphT organizes CUDA optimization trajectories into a structured reasoning graph, modeling the combined CUDA optimizations as state transitions, and leverages Monte Carlo Graph Search (MCGS) for efficient exploration. We also present a CUDA-specific benchmark with difficulty tiers defined by reasoning complexity to evaluate models more comprehensively. Experiments show that ReGraphT outperforms HPC-specific fine-tuned models and other retrieval-augmented approaches, achieving an average 2.33X speedup on CUDAEval and ParEval. When paired with DeepSeek-Coder-V2-Lite-Instruct and Qwen2.5-Coder-7B-Instruct, ReGraphT enables SLMs to approach LLM-level performance without the associated privacy risks or excessive computing overhead.

Cheng Liu, Yifei Lu, Fanghua Ye et al.

Role-Playing Language Agents (RPLAs) have emerged as a significant application direction for Large Language Models (LLMs). Existing approaches typically rely on prompt engineering or supervised fine-tuning to enable models to imitate character behaviors in specific scenarios, but often neglect the underlying \emph{cognitive} mechanisms driving these behaviors. Inspired by cognitive psychology, we introduce \textbf{CogDual}, a novel RPLA adopting a \textit{cognize-then-respond } reasoning paradigm. By jointly modeling external situational awareness and internal self-awareness, CogDual generates responses with improved character consistency and contextual alignment. To further optimize the performance, we employ reinforcement learning with two general-purpose reward schemes designed for open-domain text generation. Extensive experiments on the CoSER benchmark, as well as Cross-MR and LifeChoice, demonstrate that CogDual consistently outperforms existing baselines and generalizes effectively across diverse role-playing tasks.

Xinghua Xue, Haitong Huang, Cheng Liu et al.

Winograd convolution is originally proposed to reduce the computing overhead by converting multiplication in neural network (NN) with addition via linear transformation. Other than the computing efficiency, we observe its great potential in improving NN fault tolerance and evaluate its fault tolerance comprehensively for the first time. Then, we explore the use of fault tolerance of winograd convolution for either fault-tolerant or energy-efficient NN processing. According to our experiments, winograd convolution can be utilized to reduce fault-tolerant design overhead by 27.49\% or energy consumption by 7.19\% without any accuracy loss compared to that without being aware of the fault tolerance

Dawen Xu, Meng He, Cheng Liu et al.

AIoT processors fabricated with newer technology nodes suffer rising soft errors due to the shrinking transistor sizes and lower power supply. Soft errors on the AIoT processors particularly the deep learning accelerators (DLAs) with massive computing may cause substantial computing errors. These computing errors are difficult to be captured by the conventional training on general purposed processors like CPUs and GPUs in a server. Applying the offline trained neural network models to the edge accelerators with errors directly may lead to considerable prediction accuracy loss. To address the problem, we propose a remote retraining framework (R2F) for remote AIoT processors with computing errors. It takes the remote AIoT processor with soft errors in the training loop such that the on-site computing errors can be learned with the application data on the server and the retrained models can be resilient to the soft errors. Meanwhile, we propose an optimized partial TMR strategy to enhance the retraining. According to our experiments, R2F enables elastic design trade-offs between the model accuracy and the performance penalty. The top-5 model accuracy can be improved by 1.93%-13.73% with 0%-200% performance penalty at high fault error rate. In addition, we notice that the retraining requires massive data transmission and even dominates the training time, and propose a sparse increment compression approach for the data transmission optimization, which reduces the retraining time by 38%-88% on average with negligible accuracy loss over a straightforward remote retraining.

Dawen Xu, Ying Wang, Kaijie Tu et al.

Generative neural network is a new category of neural networks and it has been widely utilized in applications such as content generation, unsupervised learning, segmentation and pose estimation. It typically involves massive computing-intensive deconvolution operations that cannot be fitted to conventional neural network processors directly. However, prior works mainly investigated specialized hardware architectures through intensive hardware modifications to the existing deep learning processors to accelerate deconvolution together with the convolution. In contrast, this work proposes a novel deconvolution implementation with a software approach and enables fast and efficient deconvolution execution on the legacy deep learning processors. Our proposed method reorganizes the computation of deconvolution and allows the deep learning processors to treat it as the standard convolution by splitting the original deconvolution filters into multiple small filters. Compared to prior acceleration schemes, the implemented acceleration scheme achieves 2.41x - 4.34x performance speedup and reduces the energy consumption by 27.7% - 54.5% on a set of realistic benchmarks. In addition, we also applied the deconvolution computing approach to the off-the-shelf commodity deep learning processors. The performance of deconvolution also exhibits significant performance speedup over prior deconvolution implementations.