Qian Wang

Chenhao Lin, Jingyi Deng, Pengbin Hu et al.

Deepfake detection automatically recognizes the manipulated medias through the analysis of the difference between manipulated and non-altered videos. It is natural to ask which are the top performers among the existing deepfake detection approaches to identify promising research directions and provide practical guidance. Unfortunately, it's difficult to conduct a sound benchmarking comparison of existing detection approaches using the results in the literature because evaluation conditions are inconsistent across studies. Our objective is to establish a comprehensive and consistent benchmark, to develop a repeatable evaluation procedure, and to measure the performance of a range of detection approaches so that the results can be compared soundly. A challenging dataset consisting of the manipulated samples generated by more than 13 different methods has been collected, and 11 popular detection approaches (9 algorithms) from the existing literature have been implemented and evaluated with 6 fair-minded and practical evaluation metrics. Finally, 92 models have been trained and 644 experiments have been performed for the evaluation. The results along with the shared data and evaluation methodology constitute a benchmark for comparing deepfake detection approaches and measuring progress.

Qian Wang, Toby P. Breckon

Prior feature transformation based approaches to Unsupervised Domain Adaptation (UDA) employ the deep features extracted by pre-trained deep models without fine-tuning them on the specific source or target domain data for a particular domain adaptation task. In contrast, end-to-end learning based approaches optimise the pre-trained backbones and the customised adaptation modules simultaneously to learn domain-invariant features for UDA. In this work, we explore the potential of combining fine-tuned features and feature transformation based UDA methods for improved domain adaptation performance. Specifically, we integrate the prevalent progressive pseudo-labelling techniques into the fine-tuning framework to extract fine-tuned features which are subsequently used in a state-of-the-art feature transformation based domain adaptation method SPL (Selective Pseudo-Labeling). Thorough experiments with multiple deep models including ResNet-50/101 and DeiT-small/base are conducted to demonstrate the combination of fine-tuned features and SPL can achieve state-of-the-art performance on several benchmark datasets.

Yitao Zhu, Zhenrong Shen, Zihao Zhao et al.

The common practice in developing computer-aided diagnosis (CAD) models based on transformer architectures usually involves fine-tuning from ImageNet pre-trained weights. However, with recent advances in large-scale pre-training and the practice of scaling laws, Vision Transformers (ViT) have become much larger and less accessible to medical imaging communities. Additionally, in real-world scenarios, the deployments of multiple CAD models can be troublesome due to problems such as limited storage space and time-consuming model switching. To address these challenges, we propose a new method MeLo (Medical image Low-rank adaptation), which enables the development of a single CAD model for multiple clinical tasks in a lightweight manner. It adopts low-rank adaptation instead of resource-demanding fine-tuning. By fixing the weight of ViT models and only adding small low-rank plug-ins, we achieve competitive results on various diagnosis tasks across different imaging modalities using only a few trainable parameters. Specifically, our proposed method achieves comparable performance to fully fine-tuned ViT models on four distinct medical imaging datasets using about 0.17% trainable parameters. Moreover, MeLo adds only about 0.5MB of storage space and allows for extremely fast model switching in deployment and inference. Our source code and pre-trained weights are available on our website (https://absterzhu.github.io/melo.github.io/).

Xin Wang, Zhenrong Shen, Zhiyun Song et al.

Magnetic resonance (MR) images collected in 2D scanning protocols typically have large inter-slice spacing, resulting in high in-plane resolution but reduced through-plane resolution. Super-resolution techniques can reduce the inter-slice spacing of 2D scanned MR images, facilitating the downstream visual experience and computer-aided diagnosis. However, most existing super-resolution methods are trained at a fixed scaling ratio, which is inconvenient in clinical settings where MR scanning may have varying inter-slice spacings. To solve this issue, we propose Hierarchical Feature Conditional Diffusion (HiFi-Diff)} for arbitrary reduction of MR inter-slice spacing. Given two adjacent MR slices and the relative positional offset, HiFi-Diff can iteratively convert a Gaussian noise map into any desired in-between MR slice. Furthermore, to enable fine-grained conditioning, the Hierarchical Feature Extraction (HiFE) module is proposed to hierarchically extract conditional features and conduct element-wise modulation. Our experimental results on the publicly available HCP-1200 dataset demonstrate the high-fidelity super-resolution capability of HiFi-Diff and its efficacy in enhancing downstream segmentation performance.

Shuang Dai, Fanlin Meng, Qian Wang et al.

Non-intrusive load monitoring (NILM), which usually utilizes machine learning methods and is effective in disaggregating smart meter readings from the household-level into appliance-level consumption, can help analyze electricity consumption behaviours of users and enable practical smart energy and smart grid applications. Recent studies have proposed many novel NILM frameworks based on federated deep learning (FL). However, there lacks comprehensive research exploring the utility optimization schemes and the privacy-preserving schemes in different FL-based NILM application scenarios. In this paper, we make the first attempt to conduct FL-based NILM focusing on both the utility optimization and the privacy-preserving by developing a distributed and privacy-preserving NILM (DP2-NILM) framework and carrying out comparative experiments on practical NILM scenarios based on real-world smart meter datasets. Specifically, two alternative federated learning strategies are examined in the utility optimization schemes, i.e., the FedAvg and the FedProx. Moreover, different levels of privacy guarantees, i.e., the local differential privacy federated learning and the global differential privacy federated learning are provided in the DP2-NILM. Extensive comparison experiments are conducted on three real-world datasets to evaluate the proposed framework.

Xinli Yue, Ningping Mou, Qian Wang et al.

Deep neural networks are vulnerable to adversarial attacks, often leading to erroneous outputs. Adversarial training has been recognized as one of the most effective methods to counter such attacks. However, existing adversarial training techniques have predominantly been tested on balanced datasets, whereas real-world data often exhibit a long-tailed distribution, casting doubt on the efficacy of these methods in practical scenarios. In this paper, we delve into adversarial training under long-tailed distributions. Through an analysis of the previous work "RoBal", we discover that utilizing Balanced Softmax Loss alone can achieve performance comparable to the complete RoBal approach while significantly reducing training overheads. Additionally, we reveal that, similar to uniform distributions, adversarial training under long-tailed distributions also suffers from robust overfitting. To address this, we explore data augmentation as a solution and unexpectedly discover that, unlike results obtained with balanced data, data augmentation not only effectively alleviates robust overfitting but also significantly improves robustness. We further investigate the reasons behind the improvement of robustness through data augmentation and identify that it is attributable to the increased diversity of examples. Extensive experiments further corroborate that data augmentation alone can significantly improve robustness. Finally, building on these findings, we demonstrate that compared to RoBal, the combination of BSL and data augmentation leads to a +6.66% improvement in model robustness under AutoAttack on CIFAR-10-LT. Our code is available at https://github.com/NISPLab/AT-BSL .

Qian Wang, Zemin Liu, Zhen Zhang et al.

Class imbalance in graph-structured data, where minor classes are significantly underrepresented, poses a critical challenge for Graph Neural Networks (GNNs). To address this challenge, existing studies generally generate new minority nodes and edges connecting new nodes to the original graph to make classes balanced. However, they do not solve the problem that majority classes still propagate information to minority nodes by edges in the original graph which introduces bias towards majority classes. To address this, we introduce BuffGraph, which inserts buffer nodes into the graph, modulating the impact of majority classes to improve minor class representation. Our extensive experiments across diverse real-world datasets empirically demonstrate that BuffGraph outperforms existing baseline methods in class-imbalanced node classification in both natural settings and imbalanced settings. Code is available at https://anonymous.4open.science/r/BuffGraph-730A.

Tianyidan Xie, Rui Ma, Qian Wang et al.

Recent advancements in image-conditioned image generation have demonstrated substantial progress. However, foreground-conditioned image generation remains underexplored, encountering challenges such as compromised object integrity, foreground-background inconsistencies, limited diversity, and reduced control flexibility. These challenges arise from current end-to-end inpainting models, which suffer from inaccurate training masks, limited foreground semantic understanding, data distribution biases, and inherent interference between visual and textual prompts. To overcome these limitations, we present Anywhere, a multi-agent framework that departs from the traditional end-to-end approach. In this framework, each agent is specialized in a distinct aspect, such as foreground understanding, diversity enhancement, object integrity protection, and textual prompt consistency. Our framework is further enhanced with the ability to incorporate optional user textual inputs, perform automated quality assessments, and initiate re-generation as needed. Comprehensive experiments demonstrate that this modular design effectively overcomes the limitations of existing end-to-end models, resulting in higher fidelity, quality, diversity and controllability in foreground-conditioned image generation. Additionally, the Anywhere framework is extensible, allowing it to benefit from future advancements in each individual agent.

Qian Wang, Fanlin Meng, Toby P. Breckon

Domain adaptation solves image classification problems in the target domain by taking advantage of the labelled source data and unlabelled target data. Usually, the source and target domains share the same set of classes. As a special case, Open-Set Domain Adaptation (OSDA) assumes there exist additional classes in the target domain but not present in the source domain. To solve such a domain adaptation problem, our proposed method learns discriminative common subspaces for the source and target domains using a novel Open-Set Locality Preserving Projection (OSLPP) algorithm. The source and target domain data are aligned in the learned common spaces class-wisely. To handle the open-set classification problem, our method progressively selects target samples to be pseudo-labelled as known classes and rejects the outliers if they are detected as from unknown classes. The common subspace learning algorithm OSLPP simultaneously aligns the labelled source data and pseudo-labelled target data from known classes and pushes the rejected target data away from the known classes. The common subspace learning and the pseudo-labelled sample selection/rejection facilitate each other in an iterative learning framework and achieves state-of-the-art performance on benchmark datasets Office-31 and Office-Home with the average HOS of 87.4% and 67.0% respectively.

Yuyu Guo, Lei Bi, Dongming Wei et al.

Motion estimation is a fundamental step in dynamic medical image processing for the assessment of target organ anatomy and function. However, existing image-based motion estimation methods, which optimize the motion field by evaluating the local image similarity, are prone to produce implausible estimation, especially in the presence of large motion. In this study, we provide a novel motion estimation framework of Dense-Sparse-Dense (DSD), which comprises two stages. In the first stage, we process the raw dense image to extract sparse landmarks to represent the target organ anatomical topology and discard the redundant information that is unnecessary for motion estimation. For this purpose, we introduce an unsupervised 3D landmark detection network to extract spatially sparse but representative landmarks for the target organ motion estimation. In the second stage, we derive the sparse motion displacement from the extracted sparse landmarks of two images of different time points. Then, we present a motion reconstruction network to construct the motion field by projecting the sparse landmarks displacement back into the dense image domain. Furthermore, we employ the estimated motion field from our two-stage DSD framework as initialization and boost the motion estimation quality in light-weight yet effective iterative optimization. We evaluate our method on two dynamic medical imaging tasks to model cardiac motion and lung respiratory motion, respectively. Our method has produced superior motion estimation accuracy compared to existing comparative methods. Besides, the extensive experimental results demonstrate that our solution can extract well representative anatomical landmarks without any requirement of manual annotation. Our code is publicly available online.

Minglei You, Qian Wang, Hongjian Sun et al.

By constructing digital twins (DT) of an integrated energy system (IES), one can benefit from DT's predictive capabilities to improve coordinations among various energy converters, hence enhancing energy efficiency, cost savings and carbon emission reduction. This paper is motivated by the fact that practical IESs suffer from multiple uncertainty sources, and complicated surrounding environment. To address this problem, a novel DT-based day-ahead scheduling method is proposed. The physical IES is modelled as a multi-vector energy system in its virtual space that interacts with the physical IES to manipulate its operations. A deep neural network is trained to make statistical cost-saving scheduling by learning from both historical forecasting errors and day-ahead forecasts. Case studies of IESs show that the proposed DT-based method is able to reduce the operating cost of IES by 63.5%, comparing to the existing forecast-based scheduling methods. It is also found that both electric vehicles and thermal energy storages play proactive roles in the proposed method, highlighting their importance in future energy system integration and decarbonisation.

Shuang Dai, Fanlin Meng, Qian Wang et al.

Non-intrusive load monitoring (NILM), which usually utilizes machine learning methods and is effective in disaggregating smart meter readings from the household-level into appliance-level consumptions, can help to analyze electricity consumption behaviours of users and enable practical smart energy and smart grid applications. However, smart meters are privately owned and distributed, which make real-world applications of NILM challenging. To this end, this paper develops a distributed and privacy-preserving federated deep learning framework for NILM (FederatedNILM), which combines federated learning with a state-of-the-art deep learning architecture to conduct NILM for the classification of typical states of household appliances. Through extensive comparative experiments, the effectiveness of the proposed FederatedNILM framework is demonstrated.

Shuang Dai, Fanlin Meng, Hongsheng Dai et al.

The power system is undergoing rapid evolution with the roll-out of advanced metering infrastructure and local energy applications (e.g. electric vehicles) as well as the increasing penetration of intermittent renewable energy at both transmission and distribution level, which characterizes the peak load demand with stronger randomness and less predictability and therefore poses a threat to the power grid security. Since storing large quantities of electricity to satisfy load demand is neither economically nor environmentally friendly, effective peak demand management strategies and reliable peak load forecast methods become essential for optimizing the power system operations. To this end, this paper provides a timely and comprehensive overview of peak load demand forecast methods in the literature. To our best knowledge, this is the first comprehensive review on such topic. In this paper we first give a precise and unified problem definition of peak load demand forecast. Second, 139 papers on peak load forecast methods were systematically reviewed where methods were classified into different stages based on the timeline. Thirdly, a comparative analysis of peak load forecast methods are summarized and different optimizing methods to improve the forecast performance are discussed. The paper ends with a comprehensive summary of the reviewed papers and a discussion of potential future research directions.

Md Mamunur Rahaman, Chen Li, Yudong Yao et al.

Cervical cancer, one of the most common fatal cancers among women, can be prevented by regular screening to detect any precancerous lesions at early stages and treat them. Pap smear test is a widely performed screening technique for early detection of cervical cancer, whereas this manual screening method suffers from high false-positive results because of human errors. To improve the manual screening practice, machine learning (ML) and deep learning (DL) based computer-aided diagnostic (CAD) systems have been investigated widely to classify cervical pap cells. Most of the existing researches require pre-segmented images to obtain good classification results, whereas accurate cervical cell segmentation is challenging because of cell clustering. Some studies rely on handcrafted features, which cannot guarantee the classification stage's optimality. Moreover, DL provides poor performance for a multiclass classification task when there is an uneven distribution of data, which is prevalent in the cervical cell dataset. This investigation has addressed those limitations by proposing DeepCervix, a hybrid deep feature fusion (HDFF) technique based on DL to classify the cervical cells accurately. Our proposed method uses various DL models to capture more potential information to enhance classification performance. Our proposed HDFF method is tested on the publicly available SIPAKMED dataset and compared the performance with base DL models and the LF method. For the SIPAKMED dataset, we have obtained the state-of-the-art classification accuracy of 99.85%, 99.38%, and 99.14% for 2-class, 3-class, and 5-class classification. Moreover, our method is tested on the Herlev dataset and achieves an accuracy of 98.32% for binary class and 90.32% for 7-class classification.

Qian Wang, Toby P. Breckon

Automatic prohibited object detection within 2D/3D X-ray Computed Tomography (CT) has been studied in literature to enhance the aviation security screening at checkpoints. Deep Convolutional Neural Networks (CNN) have demonstrated superior performance in 2D X-ray imagery. However, there exists very limited proof of how deep neural networks perform in materials detection within volumetric 3D CT baggage screening imagery. We attempt to close this gap by applying Deep Neural Networks in 3D contraband substance detection based on their material signatures. Specifically, we formulate it as a 3D semantic segmentation problem to identify material types for all voxels based on which contraband materials can be detected. To this end, we firstly investigate 3D CNN based semantic segmentation algorithms such as 3D U-Net and its variants. In contrast to the original dense representation form of volumetric 3D CT data, we propose to convert the CT volumes into sparse point clouds which allows the use of point cloud processing approaches such as PointNet++ towards more efficient processing. Experimental results on a publicly available dataset (NEU ATR) demonstrate the effectiveness of both 3D U-Net and PointNet++ in materials detection in 3D CT imagery for baggage security screening.

Qian Wang, Fanlin Meng, Toby P. Breckon

We address the Unsupervised Domain Adaptation (UDA) problem in image classification from a new perspective. In contrast to most existing works which either align the data distributions or learn domain-invariant features, we directly learn a unified classifier for both domains within a high-dimensional homogeneous feature space without explicit domain adaptation. To this end, we employ the effective Selective Pseudo-Labelling (SPL) techniques to take advantage of the unlabelled samples in the target domain. Surprisingly, data distribution discrepancy across the source and target domains can be well handled by a computationally simple classifier (e.g., a shallow Multi-Layer Perceptron) trained in the original feature space. Besides, we propose a novel generative model norm-VAE to generate synthetic features for the target domain as a data augmentation strategy to enhance classifier training. Experimental results on several benchmark datasets demonstrate the pseudo-labelling strategy itself can lead to comparable performance to many state-of-the-art methods whilst the use of norm-VAE for feature augmentation can further improve the performance in most cases. As a result, our proposed methods (i.e. naive-SPL and norm-VAE-SPL) can achieve new state-of-the-art performance with the average accuracy of 93.4% and 90.4% on Office-Caltech and ImageCLEF-DA datasets, and comparable performance on Digits, Office31 and Office-Home datasets with the average accuracy of 97.2%, 87.6% and 67.9% respectively.

Qian Wang, Neelanjan Bhowmik, Toby P. Breckon

Automatic detection of prohibited objects within passenger baggage is important for aviation security. X-ray Computed Tomography (CT) based 3D imaging is widely used in airports for aviation security screening whilst prior work on automatic prohibited item detection focus primarily on 2D X-ray imagery. These works have proven the possibility of extending deep convolutional neural networks (CNN) based automatic prohibited item detection from 2D X-ray imagery to volumetric 3D CT baggage security screening imagery. However, previous work on 3D object detection in baggage security screening imagery focused on the detection of one specific type of objects (e.g., either {\it bottles} or {\it handguns}). As a result, multiple models are needed if more than one type of prohibited item is required to be detected in practice. In this paper, we consider the detection of multiple object categories of interest using one unified framework. To this end, we formulate a more challenging multi-class 3D object detection problem within 3D CT imagery and propose a viable solution (3D RetinaNet) to tackle this problem. To enhance the performance of detection we investigate a variety of strategies including data augmentation and varying backbone networks. Experimentation carried out to provide both quantitative and qualitative evaluations of the proposed approach to multi-class 3D object detection within 3D CT baggage security screening imagery. Experimental results demonstrate the combination of the 3D RetinaNet and a series of favorable strategies can achieve a mean Average Precision (mAP) of 65.3\% over five object classes (i.e. {\it bottles, handguns, binoculars, glock frames, iPods}). The overall performance is affected by the poor performance on {\it glock frames} and {\it iPods} due to the lack of data and their resemblance with the baggage clutter.

Qian Wang, Toby P. Breckon

Domain adaptation approaches aim to exploit useful information from the source domain where supervised learning examples are easier to obtain to address a learning problem in the target domain where there is no or limited availability of such examples. In classification problems, domain adaptation has been studied under varying supervised, unsupervised and semi-supervised conditions. However, a common situation when the labelled samples are available for a subset of target domain classes has been overlooked. In this paper, we formulate this particular domain adaptation problem within a generalized zero-shot learning framework by treating the labelled source domain samples as semantic representations for zero-shot learning. For this particular problem, neither conventional domain adaptation approaches nor zero-shot learning algorithms directly apply. To address this generalized zero-shot domain adaptation problem, we present a novel Coupled Conditional Variational Autoencoder (CCVAE) which can generate synthetic target domain features for unseen classes from their source domain counterparts. Extensive experiments have been conducted on three domain adaptation datasets including a bespoke X-ray security checkpoint dataset to simulate a real-world application in aviation security. The results demonstrate the effectiveness of our proposed approach both against established benchmarks and in terms of real-world applicability.

Wenxi Li, Zhuoqun Cao, Qian Wang et al.

Density regression has been widely employed in crowd counting. However, the frequency imbalance of pixel values in the density map is still an obstacle to improve the performance. In this paper, we propose a novel learning strategy for learning error-driven curriculum, which uses an additional network to supervise the training of the main network. A tutoring network called TutorNet is proposed to repetitively indicate the critical errors of the main network. TutorNet generates pixel-level weights to formulate the curriculum for the main network during training, so that the main network will assign a higher weight to those hard examples than easy examples. Furthermore, we scale the density map by a factor to enlarge the distance among inter-examples, which is well known to improve the performance. Extensive experiments on two challenging benchmark datasets show that our method has achieved state-of-the-art performance.

Sheng Wang, Jiayu Huo, Xi Ouyang et al.

Computer-aided diagnosis with deep learning techniques has been shown to be helpful for the diagnosis of the mammography in many clinical studies. However, the image styles of different vendors are very distinctive, and there may exist domain gap among different vendors that could potentially compromise the universal applicability of one deep learning model. In this study, we explicitly address style variety issue with the proposed multi-resolution and multi-reference neural style transfer (mr2NST) network. The mr2NST can normalize the styles from different vendors to the same style baseline with very high resolution. We illustrate that the image quality of the transferred images is comparable to the quality of original images of the target domain (vendor) in terms of NIMA scores. Meanwhile, the mr2NST results are also shown to be helpful for the lesion detection in mammograms.

Qian Wang, Toby P. Breckon

Heterogeneous Domain Adaptation (HDA) addresses the transfer learning problems where data from the source and target domains are of different modalities (e.g., texts and images) or feature dimensions (e.g., features extracted with different methods). It is useful for multi-modal data analysis. Traditional domain adaptation algorithms assume that the representations of source and target samples reside in the same feature space, hence are likely to fail in solving the heterogeneous domain adaptation problem. Contemporary state-of-the-art HDA approaches are usually composed of complex optimization objectives for favourable performance and are therefore computationally expensive and less generalizable. To address these issues, we propose a novel Cross-Domain Structure Preserving Projection (CDSPP) algorithm for HDA. As an extension of the classic LPP to heterogeneous domains, CDSPP aims to learn domain-specific projections to map sample features from source and target domains into a common subspace such that the class consistency is preserved and data distributions are sufficiently aligned. CDSPP is simple and has deterministic solutions by solving a generalized eigenvalue problem. It is naturally suitable for supervised HDA but has also been extended for semi-supervised HDA where the unlabelled target domain samples are available. Extensive experiments have been conducted on commonly used benchmark datasets (i.e. Office-Caltech, Multilingual Reuters Collection, NUS-WIDE-ImageNet) for HDA as well as the Office-Home dataset firstly introduced for HDA by ourselves due to its significantly larger number of classes than the existing ones (65 vs 10, 6 and 8). The experimental results of both supervised and semi-supervised HDA demonstrate the superior performance of our proposed method against contemporary state-of-the-art methods.

Qian Wang, Neelanjan Bhowmik, Toby P. Breckon

X-ray Computed Tomography (CT) based 3D imaging is widely used in airports for aviation security screening whilst prior work on prohibited item detection focuses primarily on 2D X-ray imagery. In this paper, we aim to evaluate the possibility of extending the automatic prohibited item detection from 2D X-ray imagery to volumetric 3D CT baggage security screening imagery. To these ends, we take advantage of 3D Convolutional Neural Neworks (CNN) and popular object detection frameworks such as RetinaNet and Faster R-CNN in our work. As the first attempt to use 3D CNN for volumetric 3D CT baggage security screening, we first evaluate different CNN architectures on the classification of isolated prohibited item volumes and compare against traditional methods which use hand-crafted features. Subsequently, we evaluate object detection performance of different architectures on volumetric 3D CT baggage images. The results of our experiments on Bottle and Handgun datasets demonstrate that 3D CNN models can achieve comparable performance (98% true positive rate and 1.5% false positive rate) to traditional methods but require significantly less time for inference (0.014s per volume). Furthermore, the extended 3D object detection models achieve promising performance in detecting prohibited items within volumetric 3D CT baggage imagery with 76% mAP for bottles and 88% mAP for handguns, which shows both the challenge and promise of such threat detection within 3D CT X-ray security imagery.

Qian Wang, Najla Megherbi, Toby P. Breckon

Threat Image Projection (TIP) is a technique used in X-ray security baggage screening systems that superimposes a threat object signature onto a benign X-ray baggage image in a plausible and realistic manner. It has been shown to be highly effective in evaluating the ongoing performance of human operators, improving their vigilance and performance on threat detection. However, with the increasing use of 3D Computed Tomography (CT) in aviation security for both hold and cabin baggage screening a significant challenge arises in extending TIP to 3D CT volumes due to the difficulty in 3D CT volume segmentation and the proper insertion location determination. In this paper, we present an approach for 3D TIP in CT volumes targeting realistic and plausible threat object insertion within 3D CT baggage images. The proposed approach consists of dual threat (source) and baggage (target) volume segmentation, particle swarm optimisation based insertion determination and metal artefact generation. In addition, we propose a TIP quality score metric to evaluate the quality of generated TIP volumes. Qualitative evaluations on real 3D CT baggage imagery show that our approach is able to generate realistic and plausible TIP which are indiscernible from real CT volumes and the TIP quality scores are consistent with human evaluations.

Qian Wang, Toby P. Breckon

Unsupervised domain adaptation aims to address the problem of classifying unlabeled samples from the target domain whilst labeled samples are only available from the source domain and the data distributions are different in these two domains. As a result, classifiers trained from labeled samples in the source domain suffer from significant performance drop when directly applied to the samples from the target domain. To address this issue, different approaches have been proposed to learn domain-invariant features or domain-specific classifiers. In either case, the lack of labeled samples in the target domain can be an issue which is usually overcome by pseudo-labeling. Inaccurate pseudo-labeling, however, could result in catastrophic error accumulation during learning. In this paper, we propose a novel selective pseudo-labeling strategy based on structured prediction. The idea of structured prediction is inspired by the fact that samples in the target domain are well clustered within the deep feature space so that unsupervised clustering analysis can be used to facilitate accurate pseudo-labeling. Experimental results on four datasets (i.e. Office-Caltech, Office31, ImageCLEF-DA and Office-Home) validate our approach outperforms contemporary state-of-the-art methods.

Neelanjan Bhowmik, Qian Wang, Yona Falinie A. Gaus et al.

Detecting prohibited items in X-ray security imagery is pivotal in maintaining border and transport security against a wide range of threat profiles. Convolutional Neural Networks (CNN) with the support of a significant volume of data have brought advancement in such automated prohibited object detection and classification. However, collating such large volumes of X-ray security imagery remains a significant challenge. This work opens up the possibility of using synthetically composed imagery, avoiding the need to collate such large volumes of hand-annotated real-world imagery. Here we investigate the difference in detection performance achieved using real and synthetic X-ray training imagery for CNN architecture detecting three exemplar prohibited items, {Firearm, Firearm Parts, Knives}, within cluttered and complex X-ray security baggage imagery. We achieve 0.88 of mean average precision (mAP) with a Faster R-CNN and ResNet-101 CNN architecture for this 3-class object detection using real X-ray imagery. While the performance is comparable with synthetically composited X-ray imagery (0.78 mAP), our extended evaluation demonstrates both challenge and promise of using synthetically composed images to diversify the X-ray security training imagery for automated detection algorithm training.

Junnan Zhu, Qian Wang, Yining Wang et al.

Cross-lingual summarization (CLS) is the task to produce a summary in one particular language for a source document in a different language. Existing methods simply divide this task into two steps: summarization and translation, leading to the problem of error propagation. To handle that, we present an end-to-end CLS framework, which we refer to as Neural Cross-Lingual Summarization (NCLS), for the first time. Moreover, we propose to further improve NCLS by incorporating two related tasks, monolingual summarization and machine translation, into the training process of CLS under multi-task learning. Due to the lack of supervised CLS data, we propose a round-trip translation strategy to acquire two high-quality large-scale CLS datasets based on existing monolingual summarization datasets. Experimental results have shown that our NCLS achieves remarkable improvement over traditional pipeline methods on both English-to-Chinese and Chinese-to-English CLS human-corrected test sets. In addition, NCLS with multi-task learning can further significantly improve the quality of generated summaries. We make our dataset and code publicly available here: http://www.nlpr.ia.ac.cn/cip/dataset.htm.

Qian Wang, Khalid N. Ismail, Toby P. Breckon

The screening of baggage using X-ray scanners is now routine in aviation security with automatic threat detection approaches, based on 3D X-ray computed tomography (CT) images, known as Automatic Threat Recognition (ATR) within the aviation security industry. These current strategies use pre-defined threat material signatures in contrast to adaptability towards new and emerging threat signatures. To address this issue, the concept of adaptive automatic threat recognition (AATR) was proposed in previous work. In this paper, we present a solution to AATR based on such X-ray CT baggage scan imagery. This aims to address the issues of rapidly evolving threat signatures within the screening requirements. Ideally, the detection algorithms deployed within the security scanners should be readily adaptable to different situations with varying requirements of threat characteristics (e.g., threat material, physical properties of objects). We tackle this issue using a novel adaptive machine learning methodology with our solution consisting of a multi-scale 3D CT image segmentation algorithm, a multi-class support vector machine (SVM) classifier for object material recognition and a strategy to enable the adaptability of our approach. Experiments are conducted on both open and sequestered 3D CT baggage image datasets specifically collected for the AATR study. Our proposed approach performs well on both recognition and adaptation. Overall our approach can achieve the probability of detection around 90% with a probability of false alarm below 20%. Our AATR shows the capabilities of adapting to varying types of materials, even the unknown materials which are not available in the training data, adapting to varying required probability of detection and adapting to varying scales of the threat object.

Qian Wang, Penghui Bu, Toby P. Breckon

Unsupervised domain adaptation aims to transfer knowledge from a source domain to a target domain so that the target domain data can be recognized without any explicit labelling information for this domain. One limitation of the problem setting is that testing data, despite having no labels, from the target domain is needed during training, which prevents the trained model being directly applied to classify unseen test instances. We formulate a new cross-domain classification problem arising from real-world scenarios where labelled data is available for a subset of classes (known classes) in the target domain, and we expect to recognize new samples belonging to any class (known and unseen classes) once the model is learned. This is a generalized zero-shot learning problem where the side information comes from the source domain in the form of labelled samples instead of class-level semantic representations commonly used in traditional zero-shot learning. We present a unified domain adaptation framework for both unsupervised and zero-shot learning conditions. Our approach learns a joint subspace from source and target domains so that the projections of both data in the subspace can be domain invariant and easily separable. We use the supervised locality preserving projection (SLPP) as the enabling technique and conduct experiments under both unsupervised and zero-shot learning conditions, achieving state-of-the-art results on three domain adaptation benchmark datasets: Office-Caltech, Office31 and Office-Home.

Qian Wang, Ning Jia, Toby P. Breckon

Recent studies on multi-label image classification have focused on designing more complex architectures of deep neural networks such as the use of attention mechanisms and region proposal networks. Although performance gains have been reported, the backbone deep models of the proposed approaches and the evaluation metrics employed in different works vary, making it difficult to compare each fairly. Moreover, due to the lack of properly investigated baselines, the advantage introduced by the proposed techniques are often ambiguous. To address these issues, we make a thorough investigation of the mainstream deep convolutional neural network architectures for multi-label image classification and present a strong baseline. With the use of proper data augmentation techniques and model ensembles, the basic deep architectures can achieve better performance than many existing more complex ones on three benchmark datasets, providing great insight for the future studies on multi-label image classification.

Xin Zhang, Qian Wang, Toby Breckon et al.

We present a method for reading digital data embedded in planar 3D printed surfaces. The data are organised in binary arrays and embedded as surface textures in a way inspired by QR codes. At the core of the retrieval method lies a Convolutional Neural Network, outputting a confidence map of the location of the surface textures encoding value 1 bits. Subsequently, the bit array is retrieved through a series of simple image processing and statistical operations applied on the confidence map. Extensive experimentation with images captured from various camera views, under various illumination conditions and from objects printed with various material colours, shows that the proposed method generalizes well and achieves the level of accuracy required in practical applications.

Qian Wang, Ke Chen

Human action recognition refers to automatic recognizing human actions from a video clip. In reality, there often exist multiple human actions in a video stream. Such a video stream is often weakly-annotated with a set of relevant human action labels at a global level rather than assigning each label to a specific video episode corresponding to a single action, which leads to a multi-label learning problem. Furthermore, there are many meaningful human actions in reality but it would be extremely difficult to collect/annotate video clips regarding all of various human actions, which leads to a zero-shot learning scenario. To the best of our knowledge, there is no work that has addressed all the above issues together in human action recognition. In this paper, we formulate a real-world human action recognition task as a multi-label zero-shot learning problem and propose a framework to tackle this problem in a holistic way. Our framework holistically tackles the issue of unknown temporal boundaries between different actions for multi-label learning and exploits the side information regarding the semantic relationship between different human actions for knowledge transfer. Consequently, our framework leads to a joint latent ranking embedding for multi-label zero-shot human action recognition. A novel neural architecture of two component models and an alternate learning algorithm are proposed to carry out the joint latent ranking embedding learning. Thus, multi-label zero-shot recognition is done by measuring relatedness scores of action labels to a test video clip in the joint latent visual and semantic embedding spaces. We evaluate our framework with different settings, including a novel data split scheme designed especially for evaluating multi-label zero-shot learning, on two datasets: Breakfast and Charades. The experimental results demonstrate the effectiveness of our framework.

Qian Wang, Ke Chen

A proper semantic representation for encoding side information is key to the success of zero-shot learning. In this paper, we explore two alternative semantic representations especially for zero-shot human action recognition: textual descriptions of human actions and deep features extracted from still images relevant to human actions. Such side information are accessible on Web with little cost, which paves a new way in gaining side information for large-scale zero-shot human action recognition. We investigate different encoding methods to generate semantic representations for human actions from such side information. Based on our zero-shot visual recognition method, we conducted experiments on UCF101 and HMDB51 to evaluate two proposed semantic representations . The results suggest that our proposed text- and image-based semantic representations outperform traditional attributes and word vectors considerably for zero-shot human action recognition. In particular, the image-based semantic representations yield the favourable performance even though the representation is extracted from a small number of images per class.

Qian Wang, Ke Chen

Zero-shot learning for visual recognition, e.g., object and action recognition, has recently attracted a lot of attention. However, it still remains challenging in bridging the semantic gap between visual features and their underlying semantics and transferring knowledge to semantic categories unseen during learning. Unlike most of the existing zero-shot visual recognition methods, we propose a stagewise bidirectional latent embedding framework to two subsequent learning stages for zero-shot visual recognition. In the bottom-up stage, a latent embedding space is first created by exploring the topological and labeling information underlying training data of known classes via a proper supervised subspace learning algorithm and the latent embedding of training data are used to form landmarks that guide embedding semantics underlying unseen classes into this learned latent space. In the top-down stage, semantic representations of unseen-class labels in a given label vocabulary are then embedded to the same latent space to preserve the semantic relatedness between all different classes via our proposed semi-supervised Sammon mapping with the guidance of landmarks. Thus, the resultant latent embedding space allows for predicting the label of a test instance with a simple nearest-neighbor rule. To evaluate the effectiveness of the proposed framework, we have conducted extensive experiments on four benchmark datasets in object and action recognition, i.e., AwA, CUB-200-2011, UCF101 and HMDB51. The experimental results under comparative studies demonstrate that our proposed approach yields the state-of-the-art performance under inductive and transductive settings.