Sravan Kumar Ankireddy

S Ashwin Hebbar, Rajesh K Mishra, Sravan Kumar Ankireddy et al.

In this paper, we introduce a neural-augmented decoder for Turbo codes called TINYTURBO . TINYTURBO has complexity comparable to the classical max-log-MAP algorithm but has much better reliability than the max-log-MAP baseline and performs close to the MAP algorithm. We show that TINYTURBO exhibits strong robustness on a variety of practical channels of interest, such as EPA and EVA channels, which are included in the LTE standards. We also show that TINYTURBO strongly generalizes across different rate, blocklengths, and trellises. We verify the reliability and efficiency of TINYTURBO via over-the-air experiments.

S. Ashwin Hebbar, Sravan Kumar Ankireddy, Harshithanjani Athi et al.

Orthogonal Frequency Division Multiplexing (OFDM) is the dominant waveform in modern wireless systems, but suffers performance degradation in high-mobility environments due to Doppler-induced inter-carrier interference and unreliable pilot-based channel estimation. Neural receivers have recently shown strong performance in OFDM systems by learning equalization and detection directly from the received time-frequency grid. However, when channel estimation becomes unreliable, receiver-side learning alone is insufficient to fully recover performance. In this work we introduce DeepOFDM, a learnable modulation framework that augments conventional OFDM with a lightweight convolutional neural network (CNN) modulator jointly optimized with a neural receiver. Instead of mapping symbols independently to resource elements, DeepOFDM spreads information across local time-frequency neighborhoods while remaining fully compatible with FFT-based OFDM processing. The learned modulation breaks the rotational symmetry of conventional QAM constellations, enabling the receiver to infer residual phase directly from data symbols. This structure allows reliable operation with sparse pilots and even in fully pilotless settings. Extensive simulations demonstrate improvements in block error rate and goodput under high Doppler, while over-the-air experiments confirm practical feasibility. These results highlight the potential of transmitter-receiver co-design for robust and spectrally efficient AI-native physical layer design.

Sravan Kumar Ankireddy, Hyeji Kim

In decoding linear block codes, it was shown that noticeable reliability gains can be achieved by introducing learnable parameters to the Belief Propagation (BP) decoder. Despite the success of these methods, there are two key open problems. The first is the lack of interpretation of the learned weights, and the other is the lack of analysis for non-AWGN channels. In this work, we aim to bridge this gap by providing insights into the weights learned and their connection to the structure of the underlying code. We show that the weights are heavily influenced by the distribution of short cycles in the code. We next look at the performance of these decoders in non-AWGN channels, both synthetic and over-the-air channels, and study the complexity vs. performance trade-offs, demonstrating that increasing the number of parameters helps significantly in complex channels. Finally, we show that the decoders with learned weights achieve higher reliability than those with weights optimized analytically under the Gaussian approximation.

Sravan Kumar Ankireddy, Nikita Seleznev, Nam H. Nguyen et al.

Transformer-based time series foundation models face a fundamental trade-off in choice of tokenization: point-wise embeddings preserve temporal fidelity but scale poorly with sequence length, whereas fixed-length patching improves efficiency by imposing uniform boundaries that may disrupt natural transitions and blur informative local dynamics. In order to address these limitations, we introduce TimeSqueeze, a dynamic patching mechanism that adaptively selects patch boundaries within each sequence based on local signal complexity. TimeSqueeze first applies a lightweight state-space encoder to extract full-resolution point-wise features, then performs content-aware segmentation by allocating short patches to information-dense regions and long patches to smooth or redundant segments. This variable-resolution compression preserves critical temporal structure while substantially reducing the token sequence presented to the Transformer backbone. Specifically for large-scale pretraining, TimeSqueeze attains up to 20x faster convergence and 8x higher data efficiency compared to equivalent point-token baselines. Experiments across long-horizon forecasting benchmarks show that TimeSqueeze consistently outperforms comparable architectures that use either point-wise tokenization or fixed-size patching.

Yulun Wu, Sravan Kumar Ankireddy, Samuel Sharpe et al.

Efficiently aggregating spatial or temporal horizons to acquire compact representations has become a unifying principle in modern deep learning models, yet learning data-adaptive representations for long-horizon sequence data, especially continuous sequences like time series, remains an open challenge. While fixed-size patching has improved scalability and performance, discovering variable-sized, data-driven patches end-to-end often forces models to rely on soft discretization, specific backbones, or heuristic rules. In this work, we propose Reinforcement Patching (ReinPatch), the first framework to jointly optimize a sequence patching policy and its downstream sequence backbone model using reinforcement learning. By formulating patch boundary placement as a discrete decision process optimized via Group Relative Policy Gradient (GRPG), ReinPatch bypasses the need for continuous relaxations and performs dynamic patching policy optimization in a natural manner. Moreover, our method allows strict enforcement of a desired compression rate, freeing the downstream backbone to scale efficiently, and naturally supports multi-level hierarchical modeling. We evaluate ReinPatch on time-series forecasting datasets, where it demonstrates compelling performance compared to state-of-the-art data-driven patching strategies. Furthermore, our detached design allows the patching module to be extracted as a standalone foundation patcher, providing the community with visual and empirical insights into the segmentation behaviors preferred by a purely performance-driven neural patching strategy.

Heasung Kim, Sravan Kumar Ankireddy

In this work, we consider the problem of network parameter optimization for rate maximization. We frame this as a joint optimization problem of power control, beam forming, and interference cancellation. We consider the setting where multiple Base Stations (BSs) communicate with multiple user equipment (UEs). Because of the exponential computational complexity of brute force search, we instead solve this nonconvex optimization problem using deep reinforcement learning (RL) techniques. Modern communication systems are notorious for their difficulty in exactly modeling their behavior. This limits us in using RL-based algorithms as interaction with the environment is needed for the agent to explore and learn efficiently. Further, it is ill-advised to deploy the algorithm in the real world for exploration and learning because of the high cost of failure. In contrast to the previous RL-based solutions proposed, such as deep-Q network (DQN) based control, we suggest an offline model-based approach. We specifically consider discrete batch-constrained deep Q-learning (BCQ) and show that performance similar to DQN can be achieved with only a fraction of the data without exploring. This maximizes sample efficiency and minimizes risk in deploying a new algorithm to commercial networks. We provide the entire project resource, including code and data, at the following link: https://github.com/Heasung-Kim/ safe-rl-deployment-for-5g.

S Ashwin Hebbar, Sravan Kumar Ankireddy, Hyeji Kim et al.

Progress in designing channel codes has been driven by human ingenuity and, fittingly, has been sporadic. Polar codes, developed on the foundation of Arikan's polarization kernel, represent the latest breakthrough in coding theory and have emerged as the state-of-the-art error-correction code for short-to-medium block length regimes. In an effort to automate the invention of good channel codes, especially in this regime, we explore a novel, non-linear generalization of Polar codes, which we call DeepPolar codes. DeepPolar codes extend the conventional Polar coding framework by utilizing a larger kernel size and parameterizing these kernels and matched decoders through neural networks. Our results demonstrate that these data-driven codes effectively leverage the benefits of a larger kernel size, resulting in enhanced reliability when compared to both existing neural codes and conventional Polar codes.

Sravan Kumar Ankireddy, Krishna Narayanan, Hyeji Kim

The design of reliable and efficient codes for channels with feedback remains a longstanding challenge in communication theory. While significant improvements have been achieved by leveraging deep learning techniques, neural codes often suffer from high computational costs, a lack of interpretability, and limited practicality in resource-constrained settings. We focus on designing low-complexity coding schemes that are interpretable and more suitable for communication systems. We advance both analytical and neural codes. First, we demonstrate that PowerBlast, an analytical coding scheme inspired by Schalkwijk-Kailath (SK) and Gallager-Nakiboğlu (GN) schemes, achieves notable reliability improvements over both SK and GN schemes, outperforming neural codes in high signal-to-noise ratio (SNR) regions. Next, to enhance reliability in low-SNR regions, we propose LightCode, a lightweight neural code that achieves state-of-the-art reliability while using a fraction of memory and compute compared to existing deeplearning-based codes. Finally, we systematically analyze the learned codes, establishing connections between LightCode and PowerBlast, identifying components crucial for performance, and providing interpretation aided by linear regression analysis.

Sravan Kumar Ankireddy, S Ashwin Hebbar, Heping Wan et al.

Tailoring polar code construction for decoding algorithms beyond successive cancellation has remained a topic of significant interest in the field. However, despite the inherent nested structure of polar codes, the use of sequence models in polar code construction is understudied. In this work, we propose using a sequence modeling framework to iteratively construct a polar code for any given length and rate under various channel conditions. Simulations show that polar codes designed via sequential modeling using transformers outperform both 5G-NR sequence and Density Evolution based approaches for both AWGN and Rayleigh fading channels.

Avinab Saha, Shashank Gupta, Sravan Kumar Ankireddy et al.

Image Classification and Video Action Recognition are perhaps the two most foundational tasks in computer vision. Consequently, explaining the inner workings of trained deep neural networks is of prime importance. While numerous efforts focus on explaining the decisions of trained deep neural networks in image classification, exploration in the domain of its temporal version, video action recognition, has been scant. In this work, we take a deeper look at this problem. We begin by revisiting Grad-CAM, one of the popular feature attribution methods for Image Classification, and its extension to Video Action Recognition tasks and examine the method's limitations. To address these, we introduce Video-TCAV, by building on TCAV for Image Classification tasks, which aims to quantify the importance of specific concepts in the decision-making process of Video Action Recognition models. As the scalable generation of concepts is still an open problem, we propose a machine-assisted approach to generate spatial and spatiotemporal concepts relevant to Video Action Recognition for testing Video-TCAV. We then establish the importance of temporally-varying concepts by demonstrating the superiority of dynamic spatiotemporal concepts over trivial spatial concepts. In conclusion, we introduce a framework for investigating hypotheses in action recognition and quantitatively testing them, thus advancing research in the explainability of deep neural networks used in video action recognition.

Po-han Li, Sravan Kumar Ankireddy, Ruihan Zhao et al.

Efficient compression of correlated data is essential to minimize communication overload in multi-sensor networks. In such networks, each sensor independently compresses the data and transmits them to a central node due to limited communication bandwidth. A decoder at the central node decompresses and passes the data to a pre-trained machine learning-based task to generate the final output. Thus, it is important to compress the features that are relevant to the task. Additionally, the final performance depends heavily on the total available bandwidth. In practice, it is common to encounter varying availability in bandwidth, and higher bandwidth results in better performance of the task. We design a novel distributed compression framework composed of independent encoders and a joint decoder, which we call neural distributed principal component analysis (NDPCA). NDPCA flexibly compresses data from multiple sources to any available bandwidth with a single model, reducing computing and storage overhead. NDPCA achieves this by learning low-rank task representations and efficiently distributing bandwidth among sensors, thus providing a graceful trade-off between performance and bandwidth. Experiments show that NDPCA improves the success rate of multi-view robotic arm manipulation by 9% and the accuracy of object detection tasks on satellite imagery by 14% compared to an autoencoder with uniform bandwidth allocation.