Multi-Target Flexible Angular Emulation for ISAC Base Station Testing Using a Conductive Amplitude and Phase Matrix Setup: Framework and Experimental Validation
This addresses a critical requirement for ISAC technology advancement by enabling realistic testing in controlled environments, though it is incremental as it builds on existing radar target simulator setups.
The paper tackles the challenge of emulating multiple targets with arbitrary radar characteristics for integrated sensing and communication (ISAC) base station testing by introducing a conductive amplitude and phase matrix framework, with experimental results showing accurate emulation of joint RCS, range, velocity, and angular characteristics in two operational modes.
Comprehensive evaluation of the functionalities, algorithms, hardware components, and performance characteristics of future integrated sensing and communication (ISAC) base stations (BSs) under realistic deployment scenarios in controlled laboratory environments represents a critical requirement for ISAC technology advancement. A primary challenge in achieving this objective involves the emulation of multiple targets with arbitrary radar cross-section (RCS), range, angle, and Doppler profiles for ISAC BS equipped with large-scale antenna arrays using radar target simulator (RTS) with limited interface ports. In this work, we introduce a simple yet highly effective and practical conductive amplitude and phase matrix framework to address this fundamental challenge. The core concept involves introducing a tunable conductive amplitude and phase modulation network in the test configuration between the ISAC BS under test and a RTS. Based on this structure, we subsequently investigate the corresponding configurations for different sensing operational modes of ISAC BSs, specifically the array duplex transmission and reception (ADTR) mode and the split-array transmission and reception (SATR) mode. For experimental validation, we design two distinct monostatic sensing scenarios to demonstrate the framework capabilities across both operational modes. The first scenario involves dynamic multi-drone sensing validation for ADTR mode operation, while the second scenario addresses static single-drone sensing for SATR mode validation. The experimental results demonstrate that the proposed framework can accurately emulate the joint RCS, range, velocity, and angular characteristics of multiple sensing targets within the conductive test environment, highlighting its significant potential for testing applications in sub-6 GHz ISAC BS development and validation.